Method for heat toilet seat

The heating method of the toilet cover is as follows: stick toilet pads on both sides of the original toilet cover, connect the wires, insert the power adapter into the socket, and enter the heating mode.

Smart toilet covers belong to household appliances, and there are precise electronic components in them, so be sure to turn off the power before cleaning, and then start cleaning after confirming that the power indicator on the control panel is turned off. It is difficult to clean the seat base and gap, and the gap between the cover plate and the toilet cannot be wiped by lifting the seat.

Regenerative seat heating toilet lid is the most common. The water in the water tank is heated by a low-power heater and then stored. When necessary, choose hot water washing, which can be selected according to the demand. The longest hot water washing with heat storage can reach 1 min, and the temperature is suitable, and the water output is also large, because the current and power used for heat storage are less.

Extended data:

The heated toilet cover is introduced as follows:

It is strange to heat the toilet lid with an instant seat ring, because it is convenient, fast, energy-saving and will not breed bacteria by directly heating tap water through a heater without a water tank. Because the regenerative type is flushed by heating the water in the water tank, it is inevitable that there will be long-term water storage to induce bacterial growth.

The problem of scale is caused by circulating heating, that is, the hot type does not need a water tank, so it is healthier to heat tap water directly as far as possible. The capacity of the hot water storage tank is limited. Once the hot water in it is used up, it takes a long time to heat up, and it may get cold at once.

How to maintain the smart toilet?

Baidu encyclopedia-intelligent toilet cover