What is used to inflate the swimming ring?

Method 1: Push the pump by hand, just insert the gas nozzle into the inflation port to inflate.

Method 2: If it is soft plastic, you can also hold the bottom of the air hole with your fingers for artificial blowing.

Pay attention to wipe the inflatable mouth of the swimming ring clean to prevent foreign objects from blocking. Gently pull out or push out the inflatable cutting door to make it protrude from the surface of the swimming ring, and open the plug. Gently squeeze the root of the air nozzle, because there is a plastic sheet there to prevent air leakage. When it is full, squeeze the connection part between the suction pipe and the air inlet, pull the suction pipe out of the mouth, and cover the soft plug of the swimming ring in time to prevent air leakage!

Extended data:

Precautions for inflatable swimming rings:

1. Because it is a plastic product, please clean the floor before use. If possible, put a clean cloth on the floor to prevent the plastic from being punctured by sharp objects on the floor.

2. Plastic products can be completely inflated for 8 minutes for the first time. Because the swimming pool was evacuated after measurement and testing by the manufacturer, the size of the plastic used for the first time could not reach the data provided by the manufacturer because of ductility. After the plastic products are inflated for the first time, there will be some slack after 24: 00. Please do the second air supplement.

Don't inflate your baby's swimming ring too full in winter, because the indoor temperature is limited at present. If it is too full, it will be filled with air conditioning. Once put into hot water, the baby swimming ring will burst at the interface due to the principle of over-inflation.

4. Before using the baby swimming ring in winter, soak it in the water temperature of 30-40 degrees for a period of time, and then use it after the material of the baby swimming ring softens and the internal air adapts to the water temperature.