Want to know how to deal with moisture and dripping water on the wall and its causes

Everyone knows that houses have been around for a long time and inevitably there will be trends and mold and even damage. If you don't have time to deal with this problem, or if it's not handled properly, it will make the wall more seriously back on trend. So, how to deal with moisture and dripping water on the wall and its causes.

Daily water splashing down the wall in the kitchen and bathroom causes moisture on the wall, and moisture dripping from the wall is a more common cause of wall regeneration. This is especially true for kitchen and bathroom cabinets. This is because water is often splashed when washing vegetables and washing dishes along the walls of kitchen cupboards. It is recommended to fill the joints between kitchen cabinets, bathroom cabinets and walls with glass glue to prevent water from flowing and the disappearing wall phenomenon disappears.

The waterproof layer of the exterior wall is damaged due to moisture dripping from the wall.

The waterproofing layer on the building's exterior wall was damaged, allowing water to leak into the building. If this is the reason why the walls are back to tide, you must contact the hotel or developer to completely correct the building's facade. The exterior walls of buildings are leaking, especially after rain or snow. This is a big problem that owners cannot solve on their own.

The isolation wall is not well made due to moisture and dripping on the wall

If the insulation of the wall is not good, it will cause a large temperature difference between the inside and outside, causing moisture and dripping on the wall. In this way, the water in the indoor air will Condensation will form on the wall as it cools, which can make the wall damp. It can be ruled out by doing a compression test. If the suppression test fails, it means there is a leak somewhere in the pipeline.

Methods to deal with moisture and dripping water on the wall

Use air conditioning to dehumidify. Air conditioners used in homes usually have a dehumidification function. However, the method of adjusting the air humidity within the air conditioner has a slower effect. It usually takes two to three hours and leaves those in the room feeling cold.

When the external humidity is high, doors and windows must be closed to prevent moisture. In general, windows should be ventilated to reduce the amount of water vapor inside. This is a new house that has just been renovated. Water vapor is very large and requires ventilation and ventilation to remove the moisture.

In indoor humidity conditions, if the computer or TV is not in use, it is best to make a protective cover to prevent cold air from contacting the back of the appliance. These devices should open more and the heat generated during machine operation can effectively expel moisture.

When there is mold on the wall, you can use a dry toothbrush to brush off the mold, and then wipe it with a soft cloth and alcohol to make the wall drab and prevent mold growth.

In addition, the ratio of bleaching powder and water is 1:99, distribute it in the water agent, pour it into a spray bottle, and spray it on the moldy wall, which can solve the problem of mold on the wall. If the weather is still humid, use a 1:20 ratio of chlorine and water. Apply it to the walls of the mold. After the walls are drab, sand the walls and apply a waterproof base. Apply a layer of latex

The above is an introduction to the moisture dripping on the wall. I hope the moisture dripping on the wall will be helpful to you

Tubatu online provides everyone with "every home free of charge" Decoration quotations, 1-4 local decoration companies, 3 sets of decoration design plans", as well as decoration avoidance strategies! Click this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiareamp;wb, you can get it for free~