Machine operation process of lidless dishwasher

Check whether the filtering device is in place. After general use of 10~ 15 times, the filter device must be cleaned.

● Turn on the power switch of the machine and turn it to "1";

● Insert the tube of spray-drying distributor into the medicament, and check whether the medicament is sufficient;

● Press the armrest of the outer cover and cover tightly, and the water tank will start to fill automatically;

● After water injection, the machine automatically starts heating;

● When the water tank and boiler thermometer reach the set temperature, the machine will start the corresponding cleaning and rinsing process;

The cleaning temperature is 50-55℃ and the rinsing temperature is 80-85℃

● Before the cleaning process begins, pour a proper amount of foam-free liquid detergent into water (if there is no detergent distributor).

● Adjust selector 3 to set the required cleaning time.

Location 1= Short Time Location 2= Long Time

Put it into the washing basket, cover it, and start the cleaning process at this time, then the rinsing process; The washing process will be displayed on the operation prompt lamp (2)

● When the running indicator light (2) goes out, it means that the washing process is over.

● The machine can start another washing program.

● If the machine is equipped with the No.8 start button, you must first cover the top cover of the machine, and then press the No.8 button to start the machine.

On the other hand, if the machine is equipped with a time selector 9, the most suitable cleaning time must be selected. Cover tightly and the cleaning process will start automatically.