Shen photography pictures

Connection of Honda Allison driving recorder: 1. Insert the wire from the upper edge of the windshield into the inner trim panel outside the A-pillar, pass down through the sealing strip on the side of the center console, and then walk from the glove box to the cigarette lighter, or walk from the lower edge of the door frame to the back row or trunk. Extra wires should be rolled up and fixed. You can decide how long to buy the power cord with the rope according to your own route. Generally speaking, manufacturers have several choices or different lengths of precursors. 3. Take the line from one end of the tape recorder, so that the extra line can be left in another section, which is easier to fix and hide. However, the cable cannot pass through the slide rail of the seat, otherwise it may be crushed when adjusting the seat. Cupid driving recorder installation: insert the memory card into the driving recorder card slot, and pay attention to the front and back. Install glass bracket and driving recorder. Clean the windshield with a car towel. Install the driving recorder in a suitable position, and be careful not to affect the driver's line of sight. Plug the power plug of driving recorder into the cigarette lighter of the car. Open the display screen of the driving recorder and adjust the angle. Connect the power cord of the driving recorder. After installation, check and test whether the function is normal. Note: The resolution setting usually has these options in the parameter setting of high-definition driving recorder: VGA, 720P, 1080P. As we all know, whether it is a camera or photography, the higher the resolution, the clearer the picture. In 1080P mode, the resolution of 1280* 1080 even reaches 1920* 1080, which is certainly better than VGA or 720P.