How to capture moving objects with Huawei mobile phones

Huawei Honor 9 setting tutorial for shooting moving objects. Honor 9 is equipped with dual rear cameras, which are not only beautiful and colorful, but can also take very beautiful photos. However, some users reported that it is not good at shooting moving objects. After the focus is set, the object is no longer in focus when the shutter is pressed. If it is flat, the photos taken will be blurry. If you encounter such a problem, then follow the editor to learn how to take pictures of moving objects.

Related tutorial: Huawei Honor 9 password visible and closed tutorial

1) First open the camera application, enter the camera interface, press and hold any blank space and slide to the left to switch interfaces. (As shown below)

2) Switch to the camera settings interface and then find the target tracking option. Turn on the switch on the right side of it, so that the camera will automatically track the moving object and always place the focus on the object. , greatly improving the success rate of shooting.

Huawei P20 Pro adopts the new 4D predictive focusing technology, which uses AI motion detection and trajectory calculation to predict the trajectory of objects and complete focusing in advance; at the same time, thanks to the application of dynamic object detection and zero-delay shutter, This greatly increases the shutter speed when shooting moving objects, allowing you to perfectly freeze every wonderful moment.

It is recommended that in photo/video mode, click the settings icon in the upper right corner to turn on the "4D Predictive Focus Tracking" function.

Whether you can use the split-screen function depends on whether the mobile phone hardware supports it and whether the application supports it. Therefore, the split-screen function can only be enabled in some application interfaces. Split-screen mode may cause some applications to fail to run properly. Please operate according to the actual situation.

You can operate as follows:

1. Click Settings > Smart Assistance > Gesture Control, and then turn on the split-screen gesture switch.

2. Hold the phone and use your knuckles to draw a horizontal line running through the middle of the screen, applying slight pressure at the starting point.

3. Please enable split screen in the application interface that supports split screen function.

Note: If the current interface does not support split screen, the phone will give corresponding prompts.