Method for make handmade antique round fan

The manufacturing method of handmade antique round fans is as follows:

1. Cut the paper into slender strips for later use. The specifications of the paper strips in the demonstration are as follows: 3 pieces of red paper, 8.5 cm wide,

3 green papers with a width of 2.5cm and 8 white papers with a width of 1cm.

2. Apply glue to the short side of the red paper strip and stick three red paper strips into a long strip.

3. Green paper strips are glued in the same way.

4. Spread the long strips of red paper strips horizontally, and arrange the green paper strips next to each other, without overlapping each other.

5. Apply glue to the white paper.

6. Then stick a white paper strip at the junction of the red and green paper strips to make the red, green and white paper strips stick together into a whole.

7. Cut off the extra white paper at the end.

8. Stick a white note on the red-green junction on the other side in the same way.

9. Then use a black crayon or marker to draw some dots on the red part as decoration.

10, and then fold the accordion shape with the width of 1 cm from one short side to the other.

1 1. Fold the folded paper strips together again. See if the head and tail are in the same direction. The head and tail are required to be consistent here.

12. So you need to cut off the last fold at one end to make the head and tail directions consistent.

13. After being folded into a bundle, wrap it around the red end with transparent tape and fix it.

14. Now, apply glue on both sides of the ice cream stick (leave 4cm at the end as the fan handle.

15. Insert the ice cream stick between the last layers of paper.

16. Stick an ice cream stick on both ends of the paper bundle and let the glue stand to dry.

17. Finally, open the two ice cream sticks to both sides, put them together, and fix the two ends with rubber bands or adhesive tapes to form naturally.

A round fan is finished.