How to cut quickly underwater?

The underwater cutting gun used is BROCO underwater cutting gun BR-22, which is designed according to ergonomics because of its simple supporting equipment and low requirements for operators. It makes divers feel comfortable and reduces the fatigue of their forearms. The cutting gun is made of durable impact and corrosion resistant materials. All metal parts are brass. Non-conductive interference coupler connects oxygen control raft and cutting gun head, which is a key safety component with unique design and can only be found in Broco cutting gun. All joints are threaded and easy to maintain (provide a full set of spare parts). The sturdy flash eliminator has an internal filter to protect divers and cutting guns without obstructing the flow of oxygen. The big chuck nut is knurled to ensure that the diver holds it firmly. Trapezoidal threads contain sludge or other debris to ensure that the courier can reliably insert and hold the cutting rod. Interchangeable chuck can install 3/8 inch or 1/4 inch cutting rod. In addition, BR-22 can be used as an electrode fixer to fix the electrode. The produced BR-22 cutting gun can be used trouble-free for many years at the lowest cost. Use ultimate value. The cutting rod 38 18UW-25 of BR-22 underwater cutting gun is characterized by burning at the tip of the rod at a temperature exceeding 10000 degrees Fahrenheit. Broco's overheated cutting rod can cut or melt almost hot and known materials. Broco's patented cutting rod is characterized by the core wire of several-day alloy, which is fixed by a series of round pleated fabrics. The alloy wire of the cutting rod is sunken at one end of the cutting gun, which helps to prevent the combustion products from flowing back to the cutting gun, making Broco underwater overheating cutting rod the safest product on the market. Overheated cutting rods can be bent 90 degrees or more to get into hard-to-reach places without blocking oxygen flow or causing insulation to crack or peel off. Although they can be used for the maximum current of 150 amps, the overheating cutting rods have no electrical equipment. Once ignited, as long as there is oxygen supply, they will continue to burn until they are consumed. Broco's underwater overheating cutting rod is available in two diameters of 1/4 inch and 3/8 inch to meet the diver's working requirements. The standard length is 18 inch. For a huge cutting task, the 3/8 "*36" overheated cutting rod can be further extended, and it takes longer to replace the cutting rod. It will be safer, faster and cheaper to cut, punch or cut underwater with Broco's underwater overheating cutting stick.