How does the surveillance camera turn on the light?

If the camera is networked, we can log in on the computer, and then adjust or disable its lighting time in the camera settings and infrared settings.

In addition, if you don't want this lamp to work, you can take the camera apart and find the cable of the infrared lamp, but this is generally not recommended.

The light of the camera determines your night vision performance. Theoretically, you should not set the shutdown function, because if someone steals your remote code or shuts it down on the device, they can commit crimes at night, and this camera is meaningless.

Installation process

1, which is used to monitor the wire of the camera, and its rated voltage should be greater than the working voltage of the wire; The insulation of the conductor shall conform to the installation mode of the line and the environmental conditions for laying. The cross-sectional area of the conductor should meet the requirements of power supply and mechanical strength.

2, wiring should try to avoid wires with connectors. In addition to using the connector, the connector of the camera must be crimped or welded, and the wire connection and branch should not be subjected to mechanical force. Under no circumstances can the wires passing through the pipeline have connectors. If necessary, put the connector on the probe terminal of the junction box as far as possible.

3. Wiring should be installed horizontally or vertically in the building. Wiring should be protected by casing (plastic pipe or iron pipe, which should be selected according to the technical requirements of indoor piping), and metal hose can be used for ceiling wiring, but it needs to be fixed firmly and beautifully.