On the Remote Control of Aircraft Cameras

C4002, after the remote controller and the helicopter are coded, the camera component indicator light is always on when there is no shooting. At this time, turn the switch on the camera assembly to the icon of the camera, and press the camera on button on the remote controller to shoot. When shooting, the indicator light of the camera component flashes all the time. Press the remote control to shoot again. The key is to stop shooting. Turn the switch on the camera assembly to the icon of the camera, and press the camera on the remote control to take pictures. You can take pictures every time you press the camera on the switch assembly, and you can take pictures every time you press the camera on the switch assembly. Then, take out the memory card from the camera assembly and insert it into the card reader. Then, insert the card reader into the USB interface of the computer, and you can watch the videos and photos taken by the helicopter on the computer. During shooting, it is not allowed to directly pull out the battery plug or the memory card from the power socket of the helicopter, otherwise the captured video will be lost. To stop shooting, you need to press the camera switch on the remote control to stop the camera component. When the camera module is powered on, the memory card cannot be directly pulled out or inserted into the memory card holder, otherwise the camera module may crash. After the camera module crashes, it needs to be turned off and turned on before it can work normally.