What computer configuration do you need to do 3d effects?

3d drawing computer configuration assembly recommendation?

For 3D rendering, the laptop configuration requirements are as follows:

1. Operating system: windows7 (64-bit recommended)

2. Memory: at least 2GB (4GB and above are recommended)

3. Graphics card: memory 1G and above, bit width 256bit and above, memory type DDR3 and above. NVIDIA brand graphics cards (such as NVIDIAQuadro series, ATIFireGL series or Firepro series) are recommended.

4.cpu:intel dual-core 64-bit frequency is high, so it is recommended to use i5 series or i7 series. It is suggested that the CPU frequency should be higher than 2.8GHz, and the central processor must support SSE2(StreamingSIMDExtensions2 2 22).

5. Hard disk: not less than 7200 rpm

6. Software: office2007 or 20 10

7. Display: the resolution is not lower than 1400X900.

If you want a better experience, higher productivity and enough budget, then Dell XPS is a good choice. Especially for content creators, such as designers, video editors, photographers or word data processors, XPS's 4K+ large screen is a powerful assistant. Even if you need to use the computer outdoors occasionally, the screen experience of using 500nit brightness outdoors is good.

3d drawing computer configuration?

3d drawing still has certain requirements for computer configuration, but the configuration parameters are not absolute. The following is the recommended configuration:

Processor: 3dmax software is often used for 3d drawing, and 3dmax is mainly rendered by cpu. In other words, the more cpu cores, the faster the rendering speed. Economical E3 123 1v23 is the first choice.

Fan: Building 400 or 3 in Xuan Bing is luxurious.

Motherboard: Because E3 cpu can't overclock, the motherboard of b85 chipset is naturally selected, and ATX board is preferred for heat dissipation wiring.

Memory: ddr3 16008g is basically enough, and the budget can be upgraded to 16g, and the two subgroups have the best dual-channel effect.

Hard disk: 7200 rpm 1TB Seagate or Western Digital mechanical hard disk. If the budget is sufficient, you can add a 120g SSD to improve the reading and writing speed of the computer.

Graphics card: Lee Tae k620 (professional graphics card) can be used if you don't play games, and GTX960 can be used for games and drawing.

The optical drive is optional, and the power supply (rated above 450w) of the chassis (ATX tower chassis) is suitable.

Laptops are used for 3D rendering. What configuration is good?

For 3D rendering, the laptop configuration requirements are as follows:

1. Operating system: windows7 (64-bit recommended)

2. Memory: at least 2GB (4GB and above are recommended)

3. Graphics card: memory 1G and above, bit width 256bit and above, memory type DDR3 and above. It is recommended to use NVIDIA brand graphics cards (solidworks certified professional graphics cards, such as NVIDIAQuadro series, ATIFireGL series or Firepro series).

4.cpu:intel dual-core 64-bit frequency is high, so it is recommended to use i5 series or i7 series. It is suggested that the CPU frequency should be higher than 2.8GHz, and the central processor must support SSE2(StreamingSIMDExtensions2 2 22).

5. Hard disk: not less than 7200 rpm

6. Software: office2007 or 20 10

7. Display: the resolution is not lower than 1400X900.

Computer configuration for professional 3d drawing?

Our company provides computers for students studying 3D modeling (the next generation). You can look at the configuration. The next generation needs to use: 3Dmax built-in mold, ZB carved high mold, maya topology low mold, mayaUV split, toolkit or SP baking diagram, SP drawing material, eight monkeys rendering. Our students' computer configuration should meet your needs.

How to draw three-dimensional pictures with Autoplant3D and how to configure the computer? What graphics card is better for drawing?

CPU: dual channel E52680

Motherboard: Ultramicro X9DAi

Graphics card: Quadro4000

Memory: DDR3 1600 above 16G is recommended.

Monitor: 27 inch 2560* 1600 (depending on your budget, you can order apples for free)

It is best to have two hard disks, one is a small-capacity solid-state hard disk for the system, and the other is a large-capacity ordinary hard disk for data storage.

That's all. It is worth noting that the power supply and heat dissipation must not be bad, otherwise the consequences will be very serious.

The above system should be regarded as a civil fighter, and the price should be 3W (unofficial version of CPU, official version is not recommended for individuals to buy, it is too expensive).