Experience of digital photography

With the acceleration of the popularization of digital cameras, many ordinary consumers have already owned digital cameras and experienced the happiness of digital photography. When we take pictures with digital cameras, we often encounter problems of one kind or another, which leads to the failure of the shooting work. The following are the causes of these problems and their solutions:

First of all, the captured image is not clear.

Although the highest resolution is used and the light is good, the photos taken are very blurred. This situation is usually caused by camera shake when the shutter button is pressed. Because of the low sensitivity of digital camera, it takes a long time to take pictures with digital camera. To take the clearest picture, you must hold the camera steady, even the slightest shaking will cause the image to blur.

Solution: Hold the camera steady, use a tripod when taking pictures, or put the camera on a table, counter or other fixed objects. Then there is the word "practice", usually practicing the basic skills of holding the machine.

1. The autofocus mark of the viewfinder is not placed on the subject. Place the autofocus frame on the subject, or use the focus lock function.

2. The lens is dirty. A dirty lens will make it difficult for the camera to find the field of vision and blur the image. Clean the lens with special lens cleaning paper.

3. Improper mode selection. When the standard mode is selected, the photographed object is shorter than the minimum effective distance (0.6m) of the lens. Or when the close-up mode is selected, the subject is far away from the minimum effective distance.

When the subject is in the range of 0.3-0.6M, take photos in close-up mode. Outside this range, take pictures in standard mode.

4. In selfie mode, stand in front of the camera and press the shutter release button. You should look at the viewfinder and press the shutter button. Don't stand in front of the camera and press the shutter button.

5. Use the fast focus function in the incorrect focus range. Use the correct fast focus key for visual distance.

There are many tutorials in this forum. By the way, there seems to be a photo exhibition in it. You can also bring your own works to the competition, with expert comments.

/groups/ 10369 _ 1778 1