The router is connected to the hard disk monitoring network cable. But how to set it up? How can you do photography?

1. First, there should be a router in the network. Then, you need to establish the correct network configuration:

The default IP address of the router is192.168.1.1,and the default subnet mask is 255.255.255.0 (these values can be changed as needed). Then configure the IP address of the computer and the IP address of the hard disk video recorder. As long as it is on the same network segment as the router.

2. The IP address of the hard disk video recorder here is set according to different brands of hard disk video recorders, and the network setting interface will be slightly different, but as long as the address configuration is correct.

Then start configuring the router, and automatically set the IP address by using the DHCP server built in the router.

1) Set the TCP/IP protocol of the computer to "automatically obtain IP address".

2) Turn off the router and computer. Turn on the router first, and then start the computer, so that the DHCP server built in the router will automatically set the IP address for the computer.

3) The address of the hard disk video recorder is192.168.1.108 (take108 as an example here). As long as you connect the router and install the software on the client's PC, you can access it in the local area network. In the LAN, the address is written as192.168.6438+0.108.

Then the user name and password. Click the link when you are finished.

3. Another very important point is the remote access of WAN, which is commonly called extranet access.

Enter the IP address of the router in the address bar of the browser. After the connection is established, login user name and password.

After logging in, set IP address subnet mask, WAN login account password in the network parameter LAN, and then connect.

Set the gateway of the hard disk video recorder as the internal network address of the router, and set the IP address as the same network segment as the gateway.

Then port mapping is carried out in forwarding rule-virtual service.

Peanut shell applies for a domain name, parses the domain name, and accesses it with the domain name indicated in the domain name information.

4. Then write the domain name of the peanut shell directly in the place where the client software inputs the IP address.

Fill in the user name and password, and you can access it.

Now the brand hard disk video recorder has APP application, that is, remote monitoring can be realized on your mobile phone or mask aligner.