How to repair the video of toy camera

How to adjust the toy mode of Sony a5000

To adjust the toy mode, Sony A5000 first needs to select the "Toy Photography" mode in the camera mode selector. Then, by properly adjusting the shutter speed, sensitivity and exposure compensation settings, the photos taken can be properly adjusted according to the different functions of the camera to achieve the best effect.

The maintenance method is as follows:

1. First, install the tripod in a proper position. Pull apart the tripod legs and fix them.

2. Then mount the pan/tilt on the tripod. Camera tripod and pan/tilt are both standard ball bowl designs.

3. Remove the tray from the pan/tilt and install it on the fixed interface at the bottom of the camera. Then install the tray on the platform. When removing and installing the tray, there is a buckle on the tripod head. It must be opened during disassembly and locked after installation.

4. After the camera is installed on the platform, the levelness, pitch damping and dynamic balance of the platform can be adjusted. It can be used after adjustment.

How to fix the doll machine if it is broken?

The doll machine is broken. I think if it is not a professional repairman, it is best to find a professional repairman to repair it.

How to repair the synchronization of video, audio and video?

Question 1: What later software can solve the problem that video, sound and pictures are out of sync fastest and simplest? initial

Question 2: How to deal with the unsynchronized video, audio and pictures? This problem can be handled, but it is more troublesome. 1, extract the audio first. 2. Mute the video. 3. Re-merge audio and video with video editing software such as "Sound Shadow" or "Power Director". Before merging, adjust the audio and video to synchronize them, and then make them. For reference.

Question 3: What if the video is out of sync? This is very common. The general solution is to pause, wait or start again. There is no other good way, that is, it was not done well when it was suppressed.

If you are satisfied with the answer, please adopt it and encourage enthusiastic people. It is not easy to help others these days ~ ~ ~

Question 4: How to adjust the synchronization of video, audio and pictures? You can also use PremierePro's

Question 5: The recorded video and sound are out of sync. How to repair the synchronization of valve video, sound and picture recorded by 50 minutes video recorder? Otherwise, it is a design error and unqualified. This is generally not the case. Most of your questions are about the playback software you use. Some playing software is not compatible with some video formats, so there will be some phenomena such as sound and picture being out of sync, even pause and diagonal stripes. Therefore, I suggest you try to change several other playback software.

Question 6: What is the general reason why audio and video are out of sync? Then your TV is broken. Go and fix it.

Question 7: What's wrong with watching videos? I am as dead as the landlord, and Youku is better. It's always like this.

It wasn't like this before.

Question 8: How to solve the original video format problem when Youku Ultra Clear video is out of sync! Find another one.

Question 9: Why are my video files out of sync? Causes and overall solutions of audio and video synchronization after AVI video conversion. The influence factor of the unsynchronized sound and image of video file is the composite code rate of video stream, audio stream and subtitle stream. Generally speaking, the image comes before the sound. Possible cause analysis 1. Avi files used after repair (individual key frame errors have little effect) or some avi files themselves are not synchronized. Number 2.2. The AC3 plug-in is too old, for example, below 0.69. 3. There are mosaics and broken frames in the video. 4. Usually, avs is used to load and suppress avi or rm files of more than 2 channels. Prevention method: 1. Update your version of direx, such as 8.0. Cut avi files and delete bad frames. 2. Upgrade the AC3 plug-in, such as the version with window setting interface above 0.69. 3. use vcedge or VCDcutter to intercept DAT files. 4. Multi-channel AC3 audio, installing AC3ACM decoder and importing AVI with AviSource can basically solve the problem of asynchronization. Solution 1: Try to repair the unsynchronization caused by 2 with rma software: first put the file to be edited in the same directory as RMA, and then open the command line. First, separate the video from the audio. Enter RMA-broken.rm at the command line (broken.rm is the file you want to edit), and then the audio file broken.000 and the video file broken.00 1 will appear in the directory. Then type RMA-jql500/broken.000 broken.001/fixed.rm on the command line. This command means that the audio file broken.000 is placed after the video file broken.00 1500ms (1000ms equals 1s). If you want to put the audio in front of the video, just add a "-"sign before 500 milliseconds. That is RMA-jql-500/broken.0001/fixed. RM The last step is to create a quotation for the newly created file fixed.rm. The specific command is: RMA-I fixed.rm Solution II to recommend a software NanDub to everyone. Because some films separate audio and video first, and then synthesize them after compression, if the parameters are set improperly, the audio and video will be out of sync. This kind of unsynchronized problem is the most difficult to solve. At present, the software that can solve this kind of problem well on the market is Nandub. NanDub is a software that specially encodes DivX and MPEG4v2 to make compressed AVI movies. The software is developed on the basis of VirtualDub 1.4. In the original function, the compression technology of MPEG4-4 movies has been greatly improved. It supports a technology called SmartBitrateControl (SBC), which can dynamically control the change of bit rate, minimize the file size under the premise of basically unchanged image quality, and provide audio support for VBRMP3 (Dynamic Bit Rate MP3), OggVorbis and AC3 files. It is a rare and powerful tool in video compression. Supplementary note: the software only supports DivX3. 1 1alpha in design, and any higher version (such as 4.0 and 5.0) cannot work normally. I have attached DivX3. 1 1alpha to the installation program on chinapsp forum, so don't worry that it will cover your current version, it is just a separate installation; It also comes with VirtualDub 1.4 and a plug-in for making subtitles. The compression ratio of this software is very large, which can basically be compressed by 50%. And the picture quality has basically not changed. It is very effective to solve the unsynchronization caused by production. We can use it to repair AVI files. The principle is to reassemble the audio and video of AVI files. The specific operation is as follows: 1. Call in AVI file and handle it with Nandub. 2. Make sure that Directstreamcopy (direct copy of video stream) is selected in the video and audio menu. 3. If you lose it, ......

Question 10: How to solve the problem of synchronization of audio and video? Actually, I also have this problem, mainly because the computer is too long. You can try setting your browser to cancel hardware acceleration.

Then right-click Video-Settings-Cancel Hardware Acceleration

Problems of video editing effect

This kind of video special effect is difficult to complete in the above two toy video editing software, and it can also be realized by changing from small to large, but it can't adjust the speed, time and position of transformation, which is too rigid and fake at first glance.

Premiere, a professional video editing software, can be realized roughly. If there are not many pictures coming at you, it will be ok. If there are more, it will be more complicated.

More real is made by video special effects production software AE, and there are two similar special effects. One is that you move forward and other objects move behind you. Second, if you don't move, other objects will move towards you, which is the way you want to come at you (in AE, it is accurate to move the camera forward and zoom in anxiously)

The most real thing is to use 3D production software 3DMAX or MAYA.

Premiere is a professional video editing software, which is very powerful and needs to be studied seriously. If you learn from textbooks, it will be quick. You will not only learn the basics, but also increase your interest in examples. The more you learn, the more addictive you become, and the effect you make is beyond your imagination. You need to be familiar with the basic tools and menus for at least half a month. )

After learning premiere(PR), it is relatively easy to learn AE. Personally, AE is like a combination of premiere and ps! But it's incredibly powerful. The basic operation is easy to learn (based on the premiere), but it takes brains to create your own special effects. Just like painting, painting doesn't necessarily make a good work. You have to be imaginative!

VEGAS, in its own propaganda language, is the best entry-level video editing software on PC. Compete with the premiere and challenge the aftereffect. "(the aftereffect is AE). If moisture and blowing parts are removed ..., ... haha!

Specializing in video and special effects, basically no Vegas. It's all PR+AE

Yc99-38 toy drone, how to change the camera?

1. Dismantle aerial photography of drones. First, remove the camera module from the drone, and then disassemble the aerial shell. 2. Remove the aerial camera lens. First, check whether the camera lens and base are glued. If there is glue, it must be removed first. Then clamp the base with a vise, and then clamp the lens with a needle-nosed pliers and rotate it counterclockwise (when the lens is up). After disassembling, you can see the photosensitive chip inside. 3. Install a new camera lens. Screw the new lens to the base, then turn on the aerial photography to see if the focus is appropriate, and rotate the lens until the display screen is the clearest. After completion, aerial photography can be reinstalled on the drone.