How does Canon's time-lapse shooting produce the effect of street lamp trajectory?

Canon camera's time-lapse shooting function can capture the passage of time, and the street lamp trajectory effect is achieved through long exposure. Here are a few steps to teach you how to use the time-delay shooting function of Canon camera to shoot the effect of street lamp trajectory.

1. Ready

First of all, you need a Canon camera, preferably a SLR camera with manual mode and time-lapse shooting function. In addition, you need a stable tripod to ensure that the camera remains stable during shooting.

Set the camera

Set the camera to manual mode and set ISO to a lower value, such as ISO 100 or ISO 200, to reduce noise. Set the white balance to automatic, or choose the appropriate white balance mode according to the scene.

3. Set the exposure time

Select the appropriate exposure time to capture the street lamp trajectory. Usually, the exposure time should be between a few seconds and tens of seconds, depending on the brightness and flow rate of the street lamp. You can find the best effect by experimenting with different exposure times.

4. Use the time-lapse shooting function

Turn on the camera's time-delay shooting function, so that you have enough time to put the camera on the tripod after pressing the shutter button, so as to avoid the camera shaking when pressing the shutter button, resulting in blurred photos.

Find the right position and angle

Choose the right position and angle to shoot the street lamp trajectory effect. You can choose busy streets or intersections to ensure that there are enough vehicles and street lamps to produce the track effect. In addition, you can try different angles and composition methods to get more interesting and unique effects.

take a picture

Put the camera on the tripod and press the shutter button to start shooting. After the exposure time is over, the camera will automatically close the shutter to complete the shooting. You can try as many times as you need until you get satisfactory results.

7. Post-processing

After shooting, you can use post-processing software to adjust and optimize the photos. You can adjust the exposure, contrast and color balance to get better results. In addition, you can crop photos and add sharpening and noise reduction functions to further improve the quality of photos.

To sum up, you need to choose the right exposure time, use a stable tripod, set the right position and angle, and make some adjustments and optimizations in post-processing. I hope these steps are helpful to you, and I wish you a beautiful photo of the street lamp track!