Workshop studio

Code for fire protection design of buildings

8.5 Location of automatic fire extinguishing system

8.5. 1 The following places shall be equipped with automatic fire extinguishing system, which shall be adopted unless it is not suitable for water protection or fire extinguishing, and unless otherwise specified in this specification.

With automatic sprinkler system:

1 50000 spindle and above cotton mill opening and cleaning workshop; Classification carding workshop of linen mills with 5000 spindles and above; Dry, and screening match factory part; Pre-production, molding, slicing and embossing of foam plastic factory; Woodworking workshop covering an area of more than 1500m2; /kloc-Single-storey and multi-storey factories for shoes, clothing, toys and electronics with a total construction area of more than 0/500m2 or 3000m2; High-rise class C factory building; The preparation part of the aircraft engine test bed; Class C underground workshop with a building area of more than 500m2;

8.5.3 The following places shall be equipped with rain shower system:

1 match factory potassium chlorate crushing plant; A factory building that produces and uses nitrocellulose, spray-painted cotton, collodion, celluloid film and nitrocellulose with a building area greater than 100m2;

2 warehouses of nitrocellulose, spray-painted cotton, collodion, celluloid film and nitrocellulose with a building area of more than 60 square meters or a storage capacity of more than 2t;

The bottling room and actual bottle warehouse of the LPG storage and distribution station where more than 3,000 bottles are bottled on the 3rd;

4.65,438+0,500-seat grand theater, first-class theater or other theaters and 2,000-seat auditorium;

5. Studios with a building area of over 400㎡ and film studios with a building area of over 500㎡;

Parts used by table tennis factory for blank rolling, slicing, ball grinding and ball separation inspection.

Please compare according to the production purpose of the factory building.