Traditional Culture Encyclopedia - Photography major - What does it mean to bring your own studio?

What does it mean to bring your own studio?

What does it mean to bring your own studio?

Question 1: What does it mean for girls to bring their own gzs? Gzs: It means Pinyin Studio. That is, the girl has a fixed place for herself, and the gold owner can find it. (It is also very exciting to listen to the telephone command and find the right position when you get to the general place.

Question 2: What do you mean, models bring their own studios? This Madou has a special photographer. If you need to shoot products or show clothes, you don't need to find a photographer after contacting this Madou. This situation is mainly aimed at enterprises without photography departments or cooperative units.

Question 3: What does a prostitute's studio mean? Please let this young lady muddle along.

Question 4: What does it mean to bring your own five stars? It means that this person is very awesome.

Question 5: What's wrong with Samsung note4' s own photo studio? According to your description, please:

1. It is recommended to go to Settings-Application Manager-All -Studio- Clear Data/Clear Default Settings.

2. Back up your important information and try to reset your phone (Setup-Reset-Restore factory settings).

If the problem still exists, it may be a problem with the mobile phone system or hardware. Please go to the nearby Samsung service center for inspection and maintenance. The service center will check the address:

Support. Samsung/support/service locations . ASP

Question 6: What graphics card is 6:sq Studio in the computer?

The following issues should be considered when the computer starts automatically:

First, the software

1. virus

When the "shock wave" virus breaks out, it will also prompt the system to start automatically after 60 seconds.

Trojan horse programs remotely control all activities of your computer, including restarting your computer.

Remove viruses, Trojans or reinstall the system.

2. The system file is corrupted.

System files are destroyed, such as basic files such as KERNEL32.DLL in Win2K and fonts in Win98FONTS directory when the system is running, which will be forced to restart when the system is started.

Solution: cover the installation or reinstall.

3. Timing software or task planning software works.

If you set a restart or load some working programs in the "Planning Taskbar", the computer will start again. In this case, we can open the "startup" item, check whether there are unfamiliar execution files or other scheduled working procedures, and then filter them before starting the inspection. Of course, we can also directly enter the "Msconfig" command in "Run" to select the startup item.

Second, the hardware.

1. Chassis power supply is insufficient, DC output is impure, and dynamic response is slow.

Users or installers often ignore the power supply and use cheap power supply, which is one of the biggest suspects that lead to the automatic restart of the system.

① The output power of power supply is insufficient. When running software that takes up a lot of CPU resources such as large 3D games, when the CPU needs high power supply, the power supply is overloaded due to insufficient power supply, and the output is stopped. After the power supply stops outputting, the load is lightened and the power supply is resumed. Because the protection/recovery time is very short, the performance given to us is that the host automatically restarts.

② The DC output of power supply is impure, and the digital circuit requires pure DC power supply. When the harmonic content in the DC output of the power supply is too large, it will lead to the working error of the digital circuit, which is manifested as frequent shutdown or restart.

③ The workload of ③③CPU is dynamic, so is the requirement for current, which requires fast dynamic response. Some poor quality power supplies have long dynamic response time, which will also lead to frequent crashes or restarts.

④ If the power of updating equipment (high-end graphics card/large hard disk/graphics card) and adding equipment (burner/hard disk) exceeds the rated output power of the original power supply, it will lead to frequent crashes or restarts.

Solution: Now replace the high-quality and high-power computer power supply.

2. The thermal stability of the memory is poor, and the chip is damaged or set incorrectly.

The probability of system restart caused by memory problems is relatively high.

① The thermal stability of the memory is poor, and it can work normally when it is turned on. When the memory temperature rises to a certain temperature, it will not work normally, resulting in a crash or restart.

(2) When the memory chip is slightly damaged, you can pass the self-check (set the quick start to detect the memory incompletely), or you can enter the ordinary desktop to run normally. When running some software with high I/O throughput (media playing, games, plane /3D drawing), it will restart or crash.

Solution: Replace the memory.

③ Setting the CAS value of the memory too small will also lead to the instability of the memory, leading to the automatic restart of the system. Generally, it is best to use the default settings of BIOS, and don't change them yourself.

3. number three. The CPU temperature is too high or the cache is damaged.

① Too high ①CPU temperature often leads to protective automatic restart. The reason for the high temperature is basically because the chassis and CPU are not well cooled. The reasons for poor heat dissipation of CPU are: low thermal conductivity of radiator material, foreign objects (mostly warranty cards) between radiator and CPU, low fan speed, too much dust on fan and radiator, and so on. In addition, the temperature measuring probe under the CPU of P2/P3 motherboard is damaged or the temperature measuring circuit inside P4CPU is damaged, the BIOS on the motherboard has a BUG and temperature measurement is not allowed under certain special circumstances, and the CPU protection temperature set in CMOS is too low. This will also lead to a protective restart.

② The damage of the first-level and second-level caches inside the CPU is a common failure of the CPU. Slightly damaged ones can still be started, and can enter the normal desktop for normal operation. When running some software with high I/O throughput (media playing, games, plane /3D drawing), it will restart or crash.

Solution: Shield the second-level cache (L2) or the first-level cache (L 1) in CMOS, or replace the CPU to eliminate it.

..... & gt

Question 7: Did the Great God find it unprofitable to take the trumpet to the set now, but it is ok to catch GREAT GHOST in full scale now, and it is unprofitable to catch ghosts with the trumpet.

Question 8: what system has Max Studio with maxdos? This general ghost system can be downloaded and installed by itself, and can be directly installed with a one-click restore tool.