Qinyuan YR- 16(B206) water dispenser, the heating indicator light is not on, and no hot water is produced. What's the problem?

Check whether the line from the switch to the heating switch is connected. General drinking fountains are not very complicated, and most of them are overheated and burned out. (The lines of the miscellaneous brand water dispenser are as thin as hair. )

It is recommended to open the back cover and have a look for yourself (cut off the power first and replace the switch first. The switch in the water dispenser is the easiest to break down, because sometimes I am afraid of wasting electricity, so I turn it off and on when I want to drink hot water, and the instantaneous current of the switch is the largest. If other fault indicators should be on.

Heat the most easily broken 1 switch, 2 wires (stick it with tape yourself or replace one), 3 iron pots filled with water (20 yuan at most) and 4 hot-melt fuses (less than 5), which are divided into 85 degrees, 90 degrees and 100 degrees,1/kloc. If this is broken, see how many degrees you are written on it.