How to make your own storage racks How to make your own storage racks

Many people like to make things by themselves in their daily lives. Before making relatively large items such as storage racks, you need to have a good understanding of the production methods. The following will introduce you in detail how to make your own storage rack, let’s learn together.

How to make your own storage rack

Materials: wooden boards, punching machine, nails, some hemp rope;

Steps to make your own storage rack:

p>

1. The first step we need to do is of course to prepare the required materials and making tools. The above are the tools I bought at the hardware store.

2. We need to drill holes in the four corners of the board. When drilling, we must drill all four holes in a rectangle. It is recommended that you drill Mark the board before drilling to avoid deviation when drilling.

3. Install iron buckles on the wall, and then cut a length of hemp rope to hang on it. When installing the iron buckles, the two iron buckles should be installed at the same level, and the installation height should be adjusted. Choice, installation too high or too low is not good.

4. Thread the hemp rope on the wooden board and then tie it with a knot.

5. Let me show you the final picture, it looks pretty good!

Tips on making your own storage racks

First of all, what you need to do is to prepare the relevant materials and production tools. If any link is not fully prepared, there may be problems. , we hope that consumers can know the advantages of homemade storage racks. They can design them according to their own needs, and when storing items, they can place more things. Naturally, they will be more satisfied, and it can also be explained in a true sense. Practical advantages.

Secondly, the template is a necessary item, and it is best to punch holes in the four corners during use, so that we can design. Generally, iron needs to be installed on the wall. Buckle, and then hang the hemp rope on it, which can be knotted well, because it must be used safely when making a homemade storage rack. If the hemp rope is not tight, it may loosen. The impact is also relatively large.

In addition to these materials and processing conditions, we'd better consider other situations. Nowadays, it is relatively simple to make homemade storage racks. However, we still need to do it according to our own needs, so as to ensure the actual value, because what we do ourselves is indeed very good; we can do it ourselves as long as there is a need.

Introduction to other homemade storage rack methods

1. Wall storage racks: Wall racks are generally more suitable for men. The main reason is that wall racks need For fixation, hardware is generally used. Here is a simple method of making a wall storage shelf:

◆First prepare nails, screws, hand targets and other hardware; as well as rope; and a board;

< p> ◆Now make four holes in the four corners of the board;

◆Then fix the hand target on the wall;

◆Just connect the hand target and the board with a rope;

2. Box storage rack

A. Preparation materials: several boxes such as shoe boxes and milk boxes; adhesive (glue or tape); wrapping paper.

Production method:

(1) First remove the lid of the box, and then wrap the box with wrapping paper.

(2) Then stack several boxes together to form an exquisite storage rack, which is very convenient; in the same way, you can also stack a variety of boxes and combine them by yourself.

B. Storage boxes have the following steps:

(1) First, we must prepare our discarded beautiful boxes, thicker paper, scissors, and transparent tape.

(2) Use scissors to cut the box into the shape we like.

(3) Then use transparent tape to seal the joints of each part.

(4) Use scissors to divide the thick cardboard into two halves. The length and width should be equal to the inner diameter of the box, and then use scissors to make a cut in the middle of one of the thick cardboards. Be careful not to cut it. After cutting, just clamp the two pieces of cardboard tightly and put them into the box.

Storage Rack Selection Guide

Look at the Plate

Plate is the main component material of the storage cabinet, and its quality directly determines the quality of the product. . The three most commonly used boards on the market are fiberboard (density board), particleboard and plywood. High-end storage cabinets mainly use melamine-laminated medium-density fiberboard, which has moisture-proof, good internal bonding, acid and alkaline resistance, and good flame resistance. advantage.

Look at the accessories

Storage cabinet accessories such as slide rails are one of the parts that are prone to problems in daily life. When choosing a locker, be sure to check the slide rails carefully. Choose accessories that are smooth and quiet during the push and pull process. Such accessories will wear less and have a longer service life.

Check the workmanship

On the surface of the locker, check whether the cabinet and door panels are flat. In terms of workmanship details, pay attention to whether the edge strips are smooth and have no gaps. Generally speaking, cabinets with machine-sealed edges are not prone to glue opening and deformation during long-term use.

Look at the structure

Nowadays, many customers choose to customize in-wall storage cabinets, which can make reasonable use of the space in the room. Usually in this case, components such as drawers and partitions can be used flexibly, and the internal structure can be laid out in the most reasonable manner, which can be discussed with the designer.

Look at the accessories

Storage cabinet accessories such as slide rails are one of the parts that are prone to problems in daily life. When choosing a locker, be sure to check the slide rails carefully. Choose accessories that are smooth and quiet during the push and pull process. Such accessories will wear less and have a longer service life.

Look at the workmanship

On the surface of the locker, check whether the cabinet and door panels are flat. In terms of workmanship details, pay attention to whether the edge strips are smooth and have no gaps. Generally speaking, cabinets with machine-sealed edges are not prone to glue opening and deformation during long-term use.

Look at the structure

Nowadays, many customers choose to customize in-wall storage cabinets, which can make reasonable use of the space in the living room. Usually in this case, components such as drawers and partitions can be used flexibly, and the internal structure can be laid out in the most reasonable manner, which can be discussed with the designer.