Traditional Culture Encyclopedia - Photography and portraiture - Text of Adult Science text box
Text of Adult Science text box
Anyway, our company published the famous Chinese version of Science for Adults. The series was originally published by the Japan Research Society. In addition to magazines that are rich in depth and interesting at the same time, the biggest selling point is that each issue is accompanied by a DIY science toys!
At the beginning of June 5438+ 10, the first cameras were "35mm binocular camera" and "desktop sweeping robot", so I took advantage of my position to choose a camera that I was very interested in and help you try it out!
The actual size is similar to that of a general magazine, but it's quite big! The thickness is about 5 cm, mainly the camera material box with the thickness in the appendix.
?
On the left is the appendix box, and on the right is the Chinese magazine, which is sandwiched between the box and the back cover when packaging. Different from the Japanese version, the China version specially invited science teachers to design interesting games suitable for "parent-child play" and "crazy transformation time" (for example, transforming the driving recorder into a miniature camera: P).
The magazine also introduces the processing method of taking square photos with appendix camera, the method of making pinhole camera and the little-known photographic evolution history, which is rich in content ~
?
Open the box in the appendix, and you can see a styrofoam box with different cavities, which contains all the parts, and the outside is sealed with shrink film, so each part stays in its place obediently and well!
Open the description in the magazine, which shows the names of all parts and their positions in the box. The first task before assembly is to count all the parts and make sure there is no shortage, so you can start assembly!
?
Oh, yes, because there are so many tiny parts, if the team finds something accidentally lost in the middle, it will be wasted! So in order to prevent the tragedy of thick lines from happening to me, I took a small box full of trinkets and false eyelashes, put the trinkets in it, opened them when necessary, and closed them immediately after use to avoid the chance of being knocked over by my hands ... ex-dividend.
There is a small screwdriver attached to the material, and the tip is magnetic, which can absorb screws and is very convenient to use!
?
Then follow the instructions in the manual. Basically, the right side plate is quite easy to assemble, and the left side plate is not difficult, but you should pay more attention when locking the reverse gear.
?
Why do you say that? That's because the inner counter gear and the outer counter must be locked with a cap screw, so that the counter can be driven by the counter gear obediently. It is very important to know whether the negative has been taken completely when taking pictures.
(Note: This camera needs to shoot each film manually. After each film is shot, the scale of the counter will turn 180 degrees. )
However, it is not so easy to lock ~ the tooth marks on the gear will make your hands hurt and it is difficult to press them tightly. The instructions tell players to remember to protect their hands with a layer of cloth. After many attempts, I personally think that the following gesture can hold both ends of the gear at the same time, which is the most stable and best ~ ~
It is easy to reinstall the shutter plate and the shutter front plate, but be careful when installing the spring of the shutter plate ~ because the spring is super small! If you accidentally fly out and can't get it back, it's a tragedy ... In addition, be careful not to stretch the spring too hard, so as not to affect the shutter operation.
The next "shutter plate turn (push) lever" is very knowledgeable ~
Maybe I'm not smart enough. I studied it for a long time at first! No matter how it is installed, the angle of the fixed transmission rod and spring cannot be the same as that in the manual! Later, I learned that it is necessary to decompose … ..
First, put the push rod on the spring C. As shown in the instruction, the short leg of the spring should hook the protruding part of the short side of the transmission rod.
?
1.? Left: Put the assembled push rod+spring on the fixed shaft, and don't press it to the bottom yet.
2.? Middle: Pull the protruding part of the long side of the push rod with your fingers and rotate it counterclockwise by about 180 degrees (Note! At this time, the long leg of the spring is still stuck in the gap between the spring and the diaphragm)
3.? The end position is just stuck next to the screw of the shutter plate. At this time, you can press down and lock the screw.
?
Is the picture difficult to understand? Then watch a movie! :D
(# The next shutter lever and shutter lever shaft are not difficult either, but it should be noted that when the shutter lever is placed on the shutter lever shaft, the lever should be slightly turned downwards in the counterclockwise direction, just to catch the convex pattern on the front plate ~ (If it is correct, you will hear a "ㄧ").
?
Similarly, there are movies whose words can't be understood!
The correct direction of the shutter lever is like this!
To complete the installation of shutter parts on the front panel, the most important thing is to test the shutter! !
Be as smooth and smooth as in the movie! If it's Kaka's, just adjust the screws. If there is no problem, keep going down ~
Otherwise, it will be "a little" trouble before other parts are installed.
But also the front plate and the combined back cover of the black box are easy to install; When installing two side plates, six screws need to be locked. The screw next to the winding shaft below will not lock well because it is blocked by the winding shaft, but it doesn't matter! Just turn the last knob a little, you can pull it out first, lock the screw and then push it back!
By the way, the instructions say that only the top two are locked, and the other four don't need to be locked first, which is convenient for subsequent actions ~
Next, the reflector should be installed on the fixed plate, and there are two protective films on the reflector. Theoretically, after the fixing plate is installed on the fuselage, the protective film should be torn off to avoid touching the mirror by mistake: p But in order to let everyone see it clearly, I will tear it off before installing it! The protective film I * * has two layers, the first layer is blue and the second layer is transparent. Stick a small piece of scotch tape on the edge of the film and you can easily tear it off ~
After both layers are torn off, the mirror surface is very smooth, but it is also possible that both films are torn off at the same time.
?
The mirror fixing plate is installed ~
?
As long as you follow the instructions in the manual, the installation of the following reel, back cover and top plate is easy to understand. Please pay attention to the direction when installing the four components of the observation window. First, except for the front panel of the observation window, the other three parts will have protrusions that are circled like pictures, and this side should be outward, which is convenient for opening the observation window with force. Second, don't put the left and right side plates upside down. The easiest way to check whether the direction is correct is to close the left and right side plates, and then close the back plate and the front plate to see if the cover can be tightly closed (the top is flat). If so, then no problem!
It is not difficult to install the lens. The main thing is to pay attention to the installation direction of the lens in the manual to ensure that the lens is not skewed and whether it is fixed firmly. When installing the lens fixing ring, it takes some effort to insert the lens holder. In order to avoid touching the lens by hand when pressing, you can apply vertical force on each dot on the ring with the help of a screwdriver head until the ring is completely attached to the lens (but be careful not to let the screwdriver head hurt the mirror).
Then assemble the camera lens and pay attention to the front and back direction of the lens.
Ha ha! Do you think the frames are different? I ... in order to prevent the adhesive from accidentally touching the lens, I stuck an acrylic diamond before assembly ~
Please note that there will be no drill on the lens of the camera model you bought ~ haha! (Friends who are afraid of bling bling, please don't worry about XD)
?
After the two lenses are combined, they can be installed on the fuselage! Pay attention to the picture in the instruction manual, and don't turn the two lenses upside down ~ first put the gear on the lens hole of the fuselage and turn it inward at the same time according to the direction on the picture ~
?
That's it! ! !
Although I love hand-making, I am actually shocked by the "non-handicraft scientific hand-making" (probably because I once took my watch apart to repair it, but I can't go back, haha …) But this camera is really not difficult, and the instructions in the magazine are quite clear!
The most important thing is ... it can really take pictures! Fun and practical ~
?
B, this camera is pure black, so ... there is a lot of room for ... DIY!
It doesn't matter if you are too lazy to do DIY. The cut decorative stickers are pasted on magazines and can be used directly ~
Or the paper tape that the bookstore can buy is also very good for decoration ~
I would like to share with you the final transformation results that my colleagues dubbed the girl's heart ↓
?
Above ~ ~
I hope everyone can boldly try this fun adult toy if they are interested!
Finally ... the camera always takes pictures!
Let's take a look at the results of the very Lomo wind!
?
?
?
Although people nowadays are pursuing the high resolution of digital cameras or mobile phone cameras, as well as many performance requirements and effects, the film machine still really has its charm! In particular, such a seemingly spring but genuine binocular camera, from the special framing method to taking pictures and developing, the whole process is full of expectations. I really don't know what the finished product will look like until I see the photos! It's also a little surprise in life ~
Adult Science 1: 35mm binocular camera
- Previous article:Mu Qing's masterpiece.
- Next article:When was the video recorder invented?
- Related articles
- What does a well-off life look like in the eyes of the post-90s generation?
- Advertising words about Tang suit
- Results of Wuxi Bridge Rollover Accident (Accident Cause Analysis and Lessons Summary)
- What is the lucky number of Zhan Hong, the lucky mobile phone number of Snake Man in 2022?
- Asking for detailed information about Li Junji.
- In the atmosphere, there are always several gases, which is the heaviest and which is the heaviest.
- Laoyangai photography
- Products and services of fashion uprising
- Chengyuan photography exhibition
- How to express the picture with lines, proportions, shapes, spaces, lightness, texture and colors?