Traditional Culture Encyclopedia - Photography and portraiture - Selection of tripod for bending wooden chair

Selection of tripod for bending wooden chair

Stability The first factor in choosing a tripod is stability.

If the tripod is too light or the connecting parts such as locks are not well made, the whole frame will shake loose, which is far from stabilizing the camera. However, at present, the weight of several cameras is generally less than 400g, so the weight of tripod is mainly in the lens.

The first thing is to check your camera and lens.

If you buy the first tripod, it should be based on the longest lens or the longest lens to be added.

Take it and your camera, go to the equipment store, install a tripod on site, and see if the longest lens on the shelf can be stable.

If you feel wobbly, it is obviously unqualified.

Many users will find it difficult to choose the weight and stability of the tripod.

Photographers who travel frequently can only accept compromise, that is, to maximize the balance between the two.

Many professional photographers have a trick, that is, to increase the weight of the tripod, hanging heavy objects everywhere on the tripod.

In order to do this, they put a small bag in the camera bag, filled with stones or sand, and then tied it to the lower end of the central column of the tripod. Because the weight is increased at the center of gravity, the shaking of the tripod can be reduced.

Folding composition First of all, in the process of purchasing a tripod, we should not only consider its firmness and weight, but also consider how many legs it consists of. How to adjust? Is there a brace to reinforce it when driving? The performance of the central column should also be considered.

These factors determine whether the tripod is easy to shake as mentioned above, and also affect the convenience of production.

Unfortunately, many tripod manufacturers seem to ignore the feel of tripods.

As far as the tripod is unfolded to the working height, there are three different methods: locking the rotating sleeve; Fix with fastening screws; Pull the lock with your thumb.

However, the way the manufacturer chooses to fix the tripod may not fully reflect whether a tripod is effective or not.

Locking the tripod by clamping is not necessarily more effective than tightening.

It depends on whether the tripod works well in the wild.

The last thing to say about folding stability and weight is that it is a contradiction to keep the tripod stable and reduce the weight.

Photographers who travel frequently can only accept compromise, that is, to maximize the balance between the two.

Many professional photographers have a trick, that is, to increase the weight of the tripod, hanging heavy objects everywhere on the tripod.

In order to do this, they put a small bag in the camera bag, filled with stones or sand, and tied it to the lower end of the central column of the tripod. Because the weight is increased at the center of gravity, the effect of reducing tripod shaking can be achieved.