Can the angle of Yinglang reversing image be adjusted?

The reflection angle of Pacific Auto Network is too low, so it can be raised. First, start the car by ignition and put it into reverse gear. Then, find the location where the reversing image is installed at the back of the car (generally under the license plate of the trunk lid). Then, turn up the camera by hand and adjust the viewing angle according to the image display in the car.

It should be noted that the camera angle should not be adjusted too high, and the center of the car width should be used as the installation benchmark, so as to ensure a more comprehensive rear view and give full play to the role of reversing images.

What should I do if the reversing image camera is too low to adjust?

The camera of reversing image is too low to be adjusted, mainly because the camera of reversing image of some original cars is fixed and there is no way to raise it. You can try putting styrofoam under the camera to raise it, but this is a personal trick, so use it with caution. In addition, you can only go to the 4s shop for help and make corresponding modifications and adjustments.

In addition, the quality of the general rear camera is not as good as that of the original camera. Because of the quality and mismatch, the rear camera may have visual deviation when used, and it may also lead to the feeling that the angle of the reversing image is too low. Therefore, it is best to install the original reversing image, which is a high-quality and guaranteed product. Generally, there will be no problem.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)