Traditional Culture Encyclopedia - Photography and portraiture - How does Nikon set the autofocus mode?

How does Nikon set the autofocus mode?

Photography refers to the process of recording images with some special equipment. Generally, we take photos with mechanical cameras or digital cameras. The following is my collection of how Nikon sets the autofocus mode for everyone. You are welcome to study for reference. I hope it helps you.

Nikon camera switching focus mode is actually very simple, Nikon camera mainly uses three focus modes.

You can see a C, an S and an M in front of the camera.

This represents three focusing modes of Nikon camera.

As long as the focus lever is set to m, the camera can use manual focus mode. In the other two focusing modes, C stands for continuous focusing and S stands for autofocus.

Nikon camera photography skills

First, keep the best resolution.

For D8x0 with 36 million pixels, it is recommended that the shutter speed should be above1/320s, and not less than1160s when anti-shake is turned on. For some models with 24 million pixels, it is recommended that the shutter speed should be above 1/200 seconds, and it should not be lower than1125 seconds when anti-shake is turned on. There is no special formula, just an experience.

In terms of lens anti-shake performance, Nikon is still honest, and the old lens has also added the test data of CIPA standard. Among them, the old 80-400D VR and 16-35/4 VR have only 2-2.5 anti-shake effect and average performance.

When D8 10 is installed on a tripod, it is suggested that electronic front curtain shutter can be used to reduce mechanical vibration. The specific method is to find d5 in the custom menu. Set the electronic front curtain shutter to open, and then switch the release mode to MUP (mirror pre-lift). At this time, press the first shutter to focus, and raise the reflector and shutter curtain; Press the second shutter to shoot directly, without other mechanical vibration.

Second, control the exposure parameters with one hand.

Nikon's ISO button is located in the left-hand area. If you shoot with a telephoto lens or other heavy lenses, you need to put the camera down first to adjust the sensitivity, which is more troublesome.

For D90, D7x00, D6x0, D7x0, D8x0 and other two-fingered cameras, you can find ISO display and adjustment in the custom menu D. Shooting/display, and you can directly adjust the camera sensitivity with the rear thumbwheel (at this time, you cannot use the simple exposure compensation function). D4 and D4S can set the animation recording button to ISO sensitivity in the F. control category.

D4/D800 and the two-wheel cameras released later, when the ISO key is pressed, the rear wheel selects the sensitivity, and the front wheel turns on/off the automatic sensitivity function. And the sensitivity set by the rear wheel is the lower limit of automatic sensitivity (the upper limit needs to be set in the menu). For early products, such as D7000, we can add an automatic ISO sensitivity control option to my menu as the first item. Then set the FN or depth of field preview button to access the first item in My Menu.

Third, white balance in complex scenes.

The easiest way is to select NEF, save it in RAW format, and then set the white balance. Friends who pursue shooting efficiency or JPG straight out need to make more preparations in the early stage-D4S, D8 10, D750, Df, D7200 and D7 100 support the white balance function. The specific operation is:

Fourth, switch to live view mode.

Press and hold WB key to turn thumbwheel to switch white balance to pre-balance.

Release the WB button, and then press and hold the WB button until the center of the screen becomes a yellow box.

Use the arrow keys to move the yellow box to the white object, and then press OK to complete the white balance setting.

Fifth, avoid formatting photos by mistake.

Nikon SLR cameras only play back photos taken by the camera by default. For example, if your memory card has been used on camera A and then inserted into camera B (B is Nikon, A is any brand, and A and B are different), then you can only see the photos taken by camera B-this is often misleading, thinking that there are no photos in the card, and you will regret it after formatting.

So after ET got the Nikon camera, the first thing was to change the play folder in the play menu to all.