Traditional Culture Encyclopedia - Photography and portraiture - What does ps mainly study? I study environmental art design.

What does ps mainly study? I study environmental art design.

This 20 PS technology must be remembered! It will make your photos beautiful. Don't!

This 20 PS technology must be remembered! It will make your photos beautiful. Don't!

Simple post-modification of digital photos

1 Open the picture and perform color image/saturation (-40) to reduce saturation.

Create a new layer, change the layer mode to soft light, and use the brush tool to draw the parts that need retouching. Here, you can use the color swatch to extract colors conveniently.

3 The color transition of the picture is not soft enough. Perform Gaussian blur (+85) under the filter again.

Simple processing of photos is not enough.

1 Open the picture, copy the background layer, and change the mode of the background layer to color filtering.

2 Adjust the color level of the background layer.

30 seconds to get Plmm art photos

1 Open the picture and copy the background layer twice.

2. Gaussian blur the copied background layer 1 (radius 4~6), and the mode of the copied background layer 2 is changed to strong light.

3. Create a new layer, fill it with patterns (half gray and half white stripes), and set the blending mode to positive overlay.

Image dislocation effect

1 Open the picture, create a new layer, select View-Ruler, select the move tool, and drag two blue markers (9 squares) from up and down respectively.

2 Use the rectangle selection tool to fill the squares (1, 9 dark gray, 5, 7 black, 3 bright gray), save them in psd format, and then close the file.

3 Perform filter-distortion-replacement, and select the psd file just saved.

Note (The Displacement Filter uses the color value of the displacement map to move the selection: white (hue value =0) is the maximum negative displacement, that is, the corresponding pixel of the image to be processed is moved to the upper left; Black (hue value =255) is the maximum positive displacement, that is, the corresponding pixel in the image moves to the lower right; Gray (hue value = 128) does not move)

Photo shadow effect

1 Open the picture, select-Select All, then edit-copy, create a new channel, and edit-paste to paste the copied picture into the new channel]

2 Perform image-adjustment-image inversion, return to RGB channel, edit-clear, and delete the original image.

3 Perform Selection-Load Selection, Call New Channel, Perform Edit-Fill (desired color)

Atomization effect

1 Open the picture, create a new layer 1, set the foreground color/background color (black/white), perform filter-rendering-cloud, and add layer mask to the layer.

2 Repeat Filter-Rendering-Clouds, Image-Adjustment-Brightness/Contrast (80,0, layer 1 mode changed to color filtering).

Character illustration effect

1 Open the picture, copy the background layer, perform the image-adjustment-channel mixer (gray, +30, +60,+10, monochrome), perform the filter-stylization-edge search, and remove the noise with gradation.

2 Set the blending mode to Overlay and fill opacity to 50%.

3 Add a gray adjustment layer on the background layer to adjust the output gray (0,+155) formalism.

4 Perform image-adjustment-optional color, fine-tune color (red, 0,+100,+100,-75; Yellow, 0, -40,+100, -40)

Use color overlay to add light and color effects to old photos.

1 Open the picture, copy the background layer, perform image-adjustment-decoloration, and adjust the brightness/contrast (-42,+18).

2 Add the "color overlay" layer style, change the blending mode to "positive overlay", click the small color block, select the desired color (red), and then merge the visible layers.

3 Add filter aperture (brightness+100)

4 Copy the background layer, add the "color overlay" layer style again, and change the blending mode to "positive overlay" (yellow).

Add blue sky to photos

1 Open the picture and make a "background copy".

Create a new layer and fill it with a blue background.

3 change the blending mode to "positive overlay"

4 Copy a "background copy 2" on the layer of the background copy.

5 Put "Background Copy 2" on the top layer and add a mask to it.

6 Select the gradient tool, drag the mouse from top to bottom, and the sky will become the selected blue.

Dealing with blurred artistic photos

1. Copy an original layer (Ctrl+J).

2. Use the copy layer of Gaussian fuzzy filter (+4.0).

3. Adjust the color (+50, 0, -64)

4. Wipe off the parts that need to be clear with an eraser with blurred edges.

5. Appropriate use of layer blending mode.

Create bright colors in the hazy (landscape, ecological category)

1 Open the picture and copy the layer.

Set the layer mode of the copied layer to Color Filter.

3 Use Gaussian blur (+8.6 pixels). l

4 Adjust the color/saturation of the image (Ctrl+U)(0,+12, 0).

Add some sharpening to reduce transparency.

Add a glass effect to the photo.

1 Select the area and press CTRL+J.

Gaussian blur (+3. 1 pixel) is applied to the shear layer.

Adjust the color balance (-39, +29,+16).

4 Create a new layer. Select the thickness area of the glass for gradient custom filling (black, white and gray, in the order of dark, bright, dark and bright), and then press Ctrl+T to adjust the thickness selection area of the glass.

5 Filter-Twist-Glass, choose the pattern you like (the twist and smoothness are 1, and the proportion is 50%).

Old photos of paper burning effect-pure PS treatment $

1 Open a picture and perform image-adjustment-hue/saturation (+1, -58,+1).

Image-Adjust-Change (Midtone, Deep Yellow, Deep Red, Highlight).

Copy the background layer and execute Filter-Texture-Granularity (9,56, vertical).

Create a new layer and perform Filter-Render-Cloud.

5 Perform Image-Adjustment-Brightness/Contrast (+27,+100).

With the magic wand tool, select the black selection in the layer 1

Close the preview of the layer 1, click Copy Background Layer, and change the foreground color to dark brown.

8 Perform selection-modification-expansion (5 pixels) and selection-feathering (5 pixels)

9 Edit-Fill (foreground), select the layer 1, and use the magic wand to select the black selection.

10 Close the preview of the background layer and layer 1, select the copied background layer, and execute Edit-Clear.

1 1 Picture-The size, height/width of the canvas are all increased by one centimeter, positioning (middle).

12 Open the preview of the background layer, select the background layer and fill the foreground color (light brown).

13 Select the copied background layer and execute Layer-Layer Style-Projection. (Positive film, opacity 45%, angle 45, distance 7, extension 2%, size 10).

14 Merge all layers.

Another method for make variegated artistic photo frame

1 Create a new file, press D and fill the background with white.

Next, Filter-Render-Cloud.

3 CTRL+M adjusts the lower curve (black and white contrast is strong).

The finished effect is followed by filter-distortion-glass (distortion 7, smoothness 3, texture-canvas, scaling 50%).

Create a new layer with a black background and another white rectangular layer.

7 Perform Filter-Distortion-Displacement on the layer where the rectangle is located, and select the default option. Then find the PSD file you just saved and replace it.

PS renders the atmosphere (scenery) of your photos.

1 image-adjustment-grayscale (RGB +29, 1.0, +234). change colour

2 execute hue/saturation command (full image-14, +4 1,-1).

Continue hue/saturation (red, hue value decreases, saturation increases).

4 Continue to execute hue/saturation (yellow, -22, +45,-1).

5 Continue hue/saturation (green,+15,0,0).

6 Adjust brightness/contrast (brightness decrease/contrast increase). Color difference (

Simple and easy to realize sketch effect

1 Open the picture, remove the color and adjust the brightness/contrast (brightness decreases/contrast increases).

2 Copy the background layer (Ctrl+J), select the background layer, perform Filter-Style-Find Edge, sharpen UXXXXX, and then

The layer mode is changed to overlay.

Create a new layer, fill it with white, add noise, then do dynamic blur, and change the layer mode to positive overlay.

Wipe the highlights with the eraser tool (change the opacity to 15%).

Drawing of brush strokes sketch effect

1 Open a picture, copy the background layer, and select the copy layer 1 to filter-blur-Gaussian blur (2.0 pixels).

2 Copy the background layer again, select Copy Layer 2, execute Filter-Sketch-Watercolor Pen (20, 60, 80), and set the layer blending mode to darken.

3 Copy the background layer again, select Copy Layer 3, set the foreground color to red, execute Filter-Sketch-Note Paper (25,7, 10), and set the opacity to 30%.

4 Copy the background layer again, select Copy Layer 4, set the foreground color to black, and the foreground color/background color to black/white. Perform Filter-Sketch-Copy (1 50), perform color scale adjustment (RGB,157,0, 159), and the fill value is 30.

Make special photos in a simple way

1 Open a picture.

Select the blue channel in the channel, then perform filter-stylization-overexposure in the blue channel, and click to return to the RGB channel.

Matrix special effects

1. Create a new file with a size of 500X300, RGB mode and white background.

2. Enter a number of 0 1 codes randomly with the text input tool, press CTRL+T to rotate vertically, and copy several copies to different sizes, and place several copies at will. Another way is to use filters, which can also achieve very good results. Menu-Filter-Texture-Texture, adjust the intensity and contrast to 100, and select the vertical texture type.

3. All the text layers and background layers with the code of 0 1 are merged, and the foreground color is green and the background color is black around R: 100, G: 255 and B: 0.

4 Select menu-Filter-Neon Effect, and set the luminous size to 10 and the luminous brightness to 15.

5. Select menu-Filter-Stylization-Illuminate Edge, and set the edge width as 1, brightness as 20, and smoothness as 1.

6. Select menu-Image-Adjust-Brightness/Contrast, adjust the brightness to-10, and adjust the contrast to about 60.

Ps "Reverse Negative Influence" Portrait Processing Example

"Reverse negative influence" is a special technique in film shooting. Is to use negative processing technology to develop the reverse film, you will get a strange and interesting color. If used in MM portrait photos, it will be filled with an avant-garde and even decadent color.

1 Open the image so that the channel panel is displayed on the right.

2 Select the blue channel in the channel control panel, enter the image menu, select the application image, and then select Invert. For mixed mode, use "positive overlay" and the opacity is 50%. Confirm.

3 Select the green channel in the channel control panel, enter the image menu, select the application image, and then select Invert. For mixed mode, use "positive overlay" with opacity of 20% to confirm.

Select the red channel in the channel control panel, enter the "Image" menu, select "Apply Image", and confirm with "Color Deepening" in the mixed mode.

5 Select the blue channel in the channel control panel, enter the "Image"-"Adjustment" menu, select "Color Scale" (or use the shortcut key "CTRL+L"), and enter 25, 0.75, 150 in the "Enter Color Scale" column to confirm.

6 Select the green channel in the channel control panel, enter the "Image"-"Adjustment" menu, select "Color Scale" (or use the shortcut key "CTRL+L"), and enter 40, 1.20, 220 in the "Enter Color Scale" column to confirm.

7 Select the red channel in the channel control panel, enter the "Image"-"Adjustment" menu, select "Color Scale" (or use the shortcut key "CTRL+L"), enter 50,1.30,255 in the "Enter Color Scale" column, and confirm.

Select all RGB channels in the channel control panel, enter the "Image"-"Adjustment" menu, select "Brightness/Contrast" to adjust the contrast brightness -5 and contrast +20, and confirm.

9 Select all RGB channels in the channel control panel, enter the "Image"-"Adjustment" menu, and select "Hue/Saturation" (or directly use the shortcut key "CTRL+U" to adjust the saturation+15, and confirm.

This post is from Zhongguancun Online Digital Photography Forum:

This tutorial introduces the color matching method of pink exterior photos. Rough color matching process: first adjust the basic color with the color matching tool, and then gradually strengthen the parts that need to be highlighted. If you feel that the color is single, you can add some complementary colors appropriately.

1, open the original material, create an optional color adjustment layer, under the parameter setting:

Red: 23 -22 38 -4 1

Yellow: 0 0 -26 0

2. Create a new layer, fill it with color #450D7D, change the blending mode of the layer to Brighten, and change the opacity of the layer to 50%.

3. Create a new layer, fill it with color #02 1D60, change the layer blending mode to Exclude, and change the layer opacity to 30%.

4. Create a new layer and press Ctrl+Alt+Shift+E to seal the layer. Execute: filter >; Fuzzy >; Gaussian blur with a value of 5. After confirmation, change the layer blending mode to Soft Light.

5. Create an optional color adjustment layer (red: -37 4 9 0). After confirmation, wipe off the background and human skin with a black brush.

6. Copy the current layer and change the opacity of the layer to 30%.

7. Create a curve adjustment layer, a little brighter.

8. Create a new layer and stamp. Properly polish people's skin and choose brightening tools to brighten the highlights of people's faces.

9. Create a curve adjustment layer, and then create a brightness/contrast adjustment layer (upper left and lower right) after determining the blue adjustment (0 6).

10. The new layer fill color is #02 1D60, the layer blending mode is changed to Exclude, and the layer opacity is changed to 10%.

1 1. Press Ctrl+Alt+~ to bring up the highlighted selection, create a new layer and fill it with white, and change the opacity of the layer to 5%.

12. Tick off the lip part with a pen, feather it properly, and create a color balance adjustment layer, which is slightly lighter.

1 3, create brightness/contrast adjustment layer (0 3)

14. Create a curve adjustment layer (blue box in the lower right corner).

15, create a hue/saturation adjustment layer (0 -5 0)

16. Create a new layer and stamp. The layer blending mode is changed to "color filter", the layer opacity is changed to: 30%, layer mask only keeps the top, and other parts are erased with a black brush.

Finally, adjust the overall color to complete the final effect.

1. Open the picture, drag it into the sky material, set the opacity to 20%, and use the mask to dissolve the picture (this step can be omitted, but a large blank sky must be added).

2. Create a new layer, poke it, perform the channel mixer operation, and set the blue channel value to 0,0,85.

3. Perform hue/saturation operation to reduce the saturation value to-15.

4. If the rendering is found to be gray, perform brightness/contrast operation.

Brightness: -8 Contrast: 5

5. Create a new layer and fill it with white. The layer mode is overlay and the opacity is set to 30%.

6. Copy the white layer and change its layer mode to soft light with opacity of 20%.

7. Create a new layer, set the foreground color to white, and use the gradient from foreground color to transparency to pull the gradient obliquely from the sky to the characters.

8. Create a new layer, the seal layer, and perform the image application operation. The data is set as follows.

Channel: red mixed color: solid mixed color opacity: 8%

9. Improve the rendering level and perform color scale adjustment again.

Input color scale: 29 1.32 255

10. Finish writing.

This tutorial introduces the common methods of making color gradient pictures. The process is simple, just create a new layer and draw a color gradient, and then adjust the layer blending mode and layer opacity. But in order to match this effect, we need to add some decorative elements, such as starlight and some dream decorative brushes. The character part also needs simple whitening and peeling.

Topaz filters and some commonly used brushes have been downloaded in www.68ps.com and can also be searched by Baidu.

1, form good habits. Copy a layer (ctrl+J), and then filter the copied layer. The topaz filter is used in this paper, and the setting parameters are as follows: sharpness: 2. 10, range: 1, corner embrittlement: 2.23, noise density: 1.57.

2. Select a rubber, and then add a mask on the layer. Mask processing: Just wipe the rubber where the filter is not needed, and the desired effect can be achieved. Here I only make a small modification to the company to avoid the influence of too many filters on the face.

3. Add color balance adjustment layers (-30, 26, 37)

4. Add a rainbow gradient, the transparency is 75%, and the mode is set to soft light (what is this rainbow gradient? It is a gradient composed of seven colors. The system gives a gradient. If the color is not satisfactory, you can create a new one yourself. If it is not new, please leave a message. )

5. Finally, embellishment. You can brush casually with your favorite brush. The key is to have a dreamy feeling, which requires blurring. Create a new layer and use a brush to Gaussian blur this layer.

1, open the original material, copy the background layer, and peel the characters appropriately (there are thousands of peeling methods, so I won't go into details. There are a lot of image processing software on the Internet, and it's good for Nikon to bring that. Novices suggest Mito Xiu Xiu, Light and Shadow, etc. , you can quickly process the skin, and then enter PHOTOSHOP for regional processing. )

2. Create a curve adjustment layer and adjust the red and blue (red is slightly brighter and blue is slightly brighter, in short, the red curve is on the upper side and blue is on the lower side).

3. Press Ctrl+Alt+~ to bring up the highlighted selection, press Ctrl+Shift+I to reverse the selection, and then create a curve adjustment layer to adjust the blue (input: 23 1 output the value of 249, and you will move the curve, if you don't understand, it means that the left end point is in the upper part and the right end point is in the lower part).

4. Create a new layer, pull out a radial gradient from white to transparent gradient, and then change the layer fill to: 3 1%.

5. Create a new layer, or use a white gradient. The position is in the upper right corner of the screen, which is the direction of people coming and going. Layer fill changed to: 78%.

6. Create an optional color adjustment layer and select black. The numerical value is yellow: -5/ white: -6/ yellow: +7.

7. Create a color balance adjustment layer, select highlights, yellow value: -5, red value: +5, and confirm the final effect.

1. First, open the original image, repair the skin and some defects, and make a gradient map mediation layer. The color setting is shown in the figure. This color system is self-contained. The principle has been mentioned in the previous tutorial, so I won't repeat it here. The transparency of color mixing is 27%. Next, make a color balance mediation layer with a middle tone of 0/+4/-20/. Do these two steps well without keeping the brightness.

2. After completing the above two steps, you can choose whether to merge the layers. When I was doing this tutorial, I merged all the layers for the convenience of screenshot. Let's continue, create a new blank layer, default foreground color, and set the gradient tool as shown in the figure. Pull the gradient on the blank layer, and the blending mode will be dimmed. Opacity depends on the gradient. The purpose of this step is to darken the corner and then adjust the color scale: 5/65438.

3. Merge and copy the background, adjust the color balance, and do not retain the brightness. The middle tone is-19/+ 16/0. In order to keep the details, we continue to change the blending mode to color, and adjust the curve as shown in the figure (186.200/67.56) to change the opacity to 60% to get a copy of the currency background.

1. Open the original material, press Ctrl+J to copy the background layer, press Ctrl+M to adjust the curve, and select "Automatic".

2. Copy the current layer, change the layer blending mode to "color filter" and change the layer opacity to: 58%. Add layer mask, and use a soft angle black brush to erase some over-bright parts. The purpose of this operation is to make the layer brighter.

3. Create a new layer, fill it with color #0d0537, and change the layer blending mode to "Exclude".

4. The new layer fill color is #fffce7, and the layer blending mode is changed to "positive overlay".

5. Select menu: layer > new adjustment layer > color can be selected, and the parameter settings are as follows (note that "relative" is selected for all methods):

Red: -37 24 100 37

Yellow: -68 5 3 1-100

Green:100-1005100

Magenta: 6 0 1 100

White: 100-18 20 0

Neutral color: 26 8 -6 1 1

6. select the menu again: layer > new adjustment layer > optional color, and the parameter settings are as follows (remember to be relative):

Yellow: 25 13 -37 23

Green:-1000-100100

7. select the menu: layer > new adjustment layer > color balance, and the parameter settings are as follows:

Intermediate key:-11118.

Check "Keep brightness"

8. select menu: layer > new adjustment layer > brightness/contrast (-13 9)

9. Create a new layer, fill it with black, and erase the middle with a bigger eraser (darken the corners).

10, if you want to add text, you can add text, merge all layers, filter-sharpen -usm sharpen, and the value is the default. That's it. You don't have to grind if you don't like it.

Very simple PS color matching tutorial, mainly using PS channel to adjust pictures into beautiful colors.

1. Open the original image and select-Image Mode -Lab Color.

2. Enter the channel In the laboratory mode, select channel A (what do you mean by selecting channel A? Many novices don't understand this problem, which leads to the wrong layer selection. The so-called selection of channel A means that you have to click the channel layer with the left mouse button to make it the current working channel), and then hold down ctrl and click on channel A to load the selection.

3. Select Invert (Ctrl+shift+I), then Copy (Ctrl+C), select Channel B, hold down Ctrl and click the left mouse button to load the selection, and then paste (Ctrl+V) the image mode to return to RGB color.

4. Image-Application Image-Channel (Blue)-Blending (Brightening)

5. Image-adjustment-photo filter-dark yellow-density-15- lightness preservation, and color matching is completed.

1. Open the picture and copy the background layer.

Roughly adjust the curve brightness (master by yourself) and hue/saturation (+12, master by yourself, because no picture is exactly the same, just achieve a bright effect).

2. Change the picture mode to Lab mode (no stitching is needed), apply the image (A channel, soft light, 60%) to the image, and then change the image mode back to RGB.

Finally, slightly adjust the color and other parameters of the picture to make it more harmonious! (You can adjust if you are satisfied), and the merger is complete!

1. Open the original material and create an optional color adjustment layer. The parameter settings are as follows:

Red: -2-1 1 28 0

Yellow: 0-10 9 0

Green: 91-18-100 29

White:-19 -22 4 0

2. Create an optional color adjustment layer with the following parameters:

Green: 100 35 -30 0

Yellow: -7 0 49 0

3. Create a curve adjustment layer and emphasize it. Just bend the curve up a little, otherwise it will cause overexposure. )

4. Create a new layer, fill it with color #5729CE, change the layer blending mode to "soft light", and change the layer opacity to 40%.

5. Press Ctrl+Alt+~ to bring up the highlighted selection and create a new layer filled with white.

6. create a new layer, press Ctrl+Alt+Shift+E to stamp the layer, and execute: Filter >;; Fuzzy >; Gaussian blur with a value of 5. After confirmation, change the layer blending mode to "Soft Light" and the layer opacity to 60%.

7. Create a curve adjustment layer and adjust the blue color (input: 230, output: 255).

8. Create a new layer and press Ctrl+Alt+Shift+E to seal the layer. Execute: filter >; Fuzzy >; Gaussian blur with a value of 5. After confirmation, change the layer blending mode to "positive overlay" and the layer opacity to 20%.

9. Create a new layer and stamp. Deepen the corners with the deepening tool, and then sharpen them properly.

1, open your materials.

2. Copy the background layer twice, and the layer will be decolored (ctrl+shift+u).

3. The mode of layer 2 is color filtering, which reduces the transparency to 60.

4. Add a new color balance in the second layer, with a color scale value of 0 2 1 0, which is grouped with the second layer (ctrl+G).

5. Add solid color, the value is R:67 G:44 B:0, and the mode is strong light to reduce the transparency to 50.

6. It's over. Say it simply.