Which brand of filter screen bracket is good?

Question 1: Which is better, Platinum hitech or Bainuo filter bracket? The first contrast is editing. Whether it is Bainuo or Platinum Sharp, it is a metal frame+plastic clip. Bainuo is fixed by laminated combination and hexagon socket head screw. As shown in the figure below, we can choose whether the clip is 1, 2 or 3 according to our own needs.

Platinum Sharp comes with 3 sets of clips, corresponding to 1, 2, 3 respectively. The membrane bracket is fixed on the filter bracket with clips and hand screws. The disadvantage is that the plastic material will be brittle in winter, and it is easy to break when it is taken down-3 sets of 6 clips, and 2 of ET's teeth have fallen out.

Two filter holders can use circular CPL filters at the same time. After all, CPL is very important when shooting water. However, in implementation, Bainuo and Platinum are very different. Let's take a look at Bainuo first. Its bracket requires 82mm CPL, and it seems that it is best to be ultra-thin. The CPL is directly put into the filter holder, which does not need to be tightened, and is fixed with two small screws with rubber sleeves.

When we want to adjust the angle of CPL, we just need to turn the dial in the red circle below the filter holder. It should be noted that the filter holder has a diameter of 82 mm.. If you want to use it on a lens with a diameter of less than 77mm, you need to buy a filter adapter ring (commonly known as a jump ring). For example, the price of 77-82mm is about 15 yuan.

Let's take a look at Spiro again. Its key point lies in the connection between the filter bracket and the lens. Polarized ring 170- 190 yuan, ordinary ring 78 yuan. The polarization ring has two apertures, such as CPL82- lens 77, which means that an 82mm polarizer can be used and mounted on a 77mm lens. This is more flexible than Bainuo. For example, I don't have an 82mm lens in my hand. I just need to buy a CPL77 lens ring. When in use, the CPL is screwed on the connecting ring first, and then the connecting ring is screwed on the lens.

There are two filter adjustment windows on the back of the filter holder of Platinum Sharp, and similar designs can be found on the hoods of some medium and long-focus lenses. When using, you need to slide down the adjusting window first, and then turn the front end of CPL directly by hand. But remember to close the adjustment window after adjustment, otherwise there will be light leakage when shooting.

It sounds complicated, but in fact, it is easy to understand as long as you play with it in your hand. As for the cost performance, although Bainuo requires the use of 82mm CPL, its filter bracket is cheaper than the platinum Sharp filter bracket+deflection ring (655+170-168 =145 yuan), which can basically subsidize the difference in CPL. Of course, if you want to match Canon16-35,

Question 2: Which brand should I choose for the square filter and bracket? Due to the limitation of circular filter size, square mirror system is now preferred.

The square filter bracket should be easy to install and opaque. It is best to bring a polarizer, because it is a necessary filter for scenery.

Germany Lipai filter screen bracket has the above effect. You can have a look.

Nikon 14-24 filter bracket comes with circular MRC CPL and circular MRC UV.

Z series filter bracket is also bidirectional adjustable M86 MRCPL. Convenient and practical.

Question 3: Ask a question about choosing a filter holder. At present, filter supports are divided into Z 100, N 150 and X 180 series.

Z 100 stent 62mm-82mm can be used.

German Lipper z 100 second generation, dark, with two-way adjustment MRC CPL. Convenient installation.

There are also Nikon 14-24 second-generation filter holders and Canon 1 1-24 filter holders.

When choosing, it is best to have the function of avoiding light. Lipai's Nikon bracket supports circular MRC UV and MRC CPL.

More practical.

Question 4: Which is better for Mowgli 1 1-24 filter holder? 1 1-24, Canon only. You need to consider whether you can block the angle. If the card color is 170, it will definitely block the angle.

LIPA is 180*2 10mm, with light structure and light-proof function.

Very practical. The quality is also good. You can try.

Question 5: As for the square filter used in the filter bracket of SLR camera, it is best to use foreign square filters such as Gaojian or Tianfen when creating. Domestic square filter belongs to the rhythm of backlight death. Anti-backlight ability is 0, which is a lesson of my blood.

Question 6: Which is better, Nextel or Stallone square filter holder?

Question 7: 100mm plug-in filter, which good filter holder is convenient to use and reliable in quality?

One is light-proof, originally equipped with circular CPL of M86, which is adjustable in both directions and very convenient.

Adapter rings are available from 62-82.

There is also a matching square mirror bag. It's Lipa from Germany. Check it online.

Question 8: What brand of filter do you use? Beginners can try those made in Germany. The products are quite complete, including round mirror, square mirror, filter bracket and mobile phone lens.

The quality is also good. Both online and offline.

Question 9: Which filter holder is better for Nikon 1424? Many domestic brands are making filter racks.

It is suggested to choose new technology instead of old technology. It is said that the screw is loose and the filter screen was dropped before.

Question 10: Bainuo fh 100 filter bracket and Musk filter bracket. Can that good Nikon lens work? Bainuo seems to be the shelf launched only last year, and Musk Moon is the entry choice in recent years.

Stallone filter bracket is the earliest in China, and there are also posts in the Infinite Forum.

Several brands can use it to see if there will be dark corners in the lens aperture selection.