How to add Haikang video recorder to Dahua camera?

To ensure that the front-end and back-end software versions support the onvif protocol, the unsupported contact technology supports the upgrade, and Haikang Dahua supports this, and then there is the problem of adding. In nvr channel management, select Custom Add, select onvif standard protocol (only this general protocol), and select Dahua device as user name and password port.

It can be added through ONIVIF protocol of Haikang camera, and the steps are as follows:

1. Open the webpage and log in to Hikang camera.

2. Click Configure in the menu above, and then click Network-Advanced Configuration.

3. Check "Enable onivif" in the Integration Agreement, and then click "Add".

4. In the small window that pops up, create an account name and password, hook the administrator and confirm.

5. Open another webpage and enter the account password to log in to Dahua Video Recorder.

6. After entering the video recorder webpage, click Settings-Remote Device-Add Manually.

7. In the pop-up window, the manufacturer selects onvif, fills in the address of Haikang camera with IP address, and fills in the user name and password. RTSP Select Adaptive, and then click OK.

If a billiard machine needs to install IVMS-4500 to control the billiard machine, add 80 8000 1554 port to the video recorder, and map the above port to the IP address of your hard disk video recorder in the router. Or directly consult Hikvision customer service.