Is there anything to pay attention to when using battery sightseeing bus?

The electric sightseeing bus is newly developed, and its instructions are actually very similar to those of an electric car. According to the use summary of Aucma Bian Xiao, battery failure and maintenance should be paid attention to when using electric sightseeing bus.

1), keep the surface of the battery clean, scrub the outside of the battery with a rag dipped in boiling water, and wipe off dust, oil stains, white powder and other pollutants that are easy to cause leakage.

2.) Always check whether the holes on the battery cover are clear during daily driving.

3.) Check the connection problem of battery cable regularly to see if the cable is loose, and the cable terminal connection should be tight and reliable.

4.) Check the height of electrolyte inside the battery, and the electrolyte level should be higher than the plate10 ~15 mm.. If the electrolyte is found to be too low, distilled water or special lead-acid battery supplement solution should be added. Never drink pure water instead.

5.) Don't let other impurities fall into the battery when adding liquid. If any impurities fall in, don't use metal substances to catch them. Clip out the impurities with a dry wooden stick.

6.) If the battery is not used for a long time, it will slowly discharge itself until it is scrapped. Therefore, when the sightseeing bus is not used for a long time, the battery should be charged and maintained every other month.

7.) When charging, you can't approach the battery being charged with your bare hands, because the hydrogen generated in the battery is easy to explode due to combustion during charging.