What aperture is used to shoot the night view of the Bund?

Question 1: How to set the camera parameters for night shooting (similar to Shanghai Bund)? Look at the night scene

1, the higher the ISO, the higher the photosensitive speed and the more noise.

If there is no tripod, set the ISO to the highest; On the other hand, if there is a tripod, set the ISO to the lowest.

2. The smaller the aperture, the greater the depth of field, and the lower the shutter speed.

Generally speaking, night scene shooting does not need too much depth of field, so the aperture does not need to be too small, and the imaging effect is moderate. Some low-end cameras, using the maximum aperture, will reduce the imaging quality.

3, white balance is not for special effects, you can use automatic gear.

4. When shooting night scenes, shutter speed is the biggest variable. In the same case, in order to get different photos, the shutter speed can be adjusted from tens of seconds to tens of seconds.

But if there is strong light in the picture, it is also necessary to prevent overexposure from forming light spots.

5. In order to get better photographic effects and works, firstly, it is suggested to use a tripod (unless you deliberately take blurred photos), and secondly, under the premise of using a fixed aperture, use different shutters to take more photos for later comparison and choice. Third, don't trust and rely on automatic metering. If the automatic metering is not done well, it will often make the night scene look like daylight. Automatic metering values can be used as a reference, and reducing exposure on this basis is often the best.

Question 2: How to set the camera parameters for night shooting (similar to Shanghai Bund)? If there is no tripod, set the ISO to the highest; On the other hand, if there is a tripod, set the ISO to the lowest.

2. The smaller the aperture, the greater the depth of field, and the lower the shutter speed.

Generally speaking, night scene shooting does not need too much depth of field, so the aperture does not need to be too small, and the imaging effect is moderate. Some low-end cameras, using the maximum aperture, will reduce the imaging quality.

3, white balance is not for special effects, you can use automatic gear.

4. When shooting night scenes, shutter speed is the biggest variable. In the same case, in order to get different photos, the shutter speed can be adjusted from tens of seconds to tens of seconds.

But if there is strong light in the picture, it is also necessary to prevent overexposure from forming light spots.

5. In order to get better photographic effects and works, firstly, it is suggested to use a tripod (unless you deliberately take blurred photos), and secondly, under the premise of using a fixed aperture, use different shutters to take more photos for later comparison and choice. Third, don't trust and rely on automatic metering. If the automatic metering is not done well, it will often make the night scene look like daylight. Automatic metering values can be used as a reference, and reducing exposure on this basis is often the best.

Question 3: How to set the camera parameters to take a clearer night shot? The general methods of night shooting are: low sensitivity, slow door, small aperture ... among which low sensitivity is the key. This can ensure a clear picture quality.

If you want to shoot the starry sky, then you need: high sense, slow door, large aperture ... high sense should be moderate, otherwise too much noise will seriously affect the image quality.

Question 4: eos 7d is equipped with 18- 135 sets of cameras to shoot. For example, I have already said how to set shooting skills for the night scene on the Bund in Shanghai, but the camera must be kept steady ... If you like to shoot scenic figures, you can consider a 17-40 or 16-35 ... or later.

Question 5: How to set the parameters of portrait shooting at night? How to shoot the light? 10 night portrait shooting skills

It is difficult to shoot a portrait at night, because we should consider the normal exposure of the foreground background and how to make the influence of the foreground people clear. Indeed, this is one of the problems that most tourists encounter when visiting the night scene. Especially when using the camera to shoot automatically, turn on the flash when shooting, so that people close to the camera can get the correct exposure. However, due to the limited flash range and short exposure time of the camera, the night scene that was originally gorgeous to the naked eye appears dark in the camera.

This is because the night scene in the distance takes a long exposure time to leave a normal exposure effect on the photo, while people nearby only need a short exposure time because of the flash. Therefore, it is best to use the manual gear of the camera when shooting, slow down the shutter and force the flash to shoot. After the flash is over, it is suggested that the characters keep their original posture until the end of exposure, so that the photos of the characters and the background night scene can be exposed normally. However, portrait shooting at night is not a patent for manual cameras. Some advanced automatic fool digital cameras have night portrait shooting mode, which is also set by using the principle of slow shutter and forced flash.

When shooting, you need to use a tripod to fix the camera, because it is necessary to keep the camera still when exposing the background for a long time, and then a tripod becomes a necessity.

When shooting portraits at night with high shutter speed and flash, the foreground figures are usually exposed normally and the background is underexposed.

Before shooting, you should explain clearly to the subject. Just because the flash is on doesn't mean the shooting is over. You must keep your original posture and position until you are told that you can change or leave. For curtain shutter, the flashing flash is a sign that the front curtain reaches one end of the film window and the power is turned on, but Hou Lian has not yet reached the film window (shutter time synchronization).

The exposure ends only when Hou Lian reaches the closed position through the film window. For the shutter in the mirror, the flash flashes at the same time when the shutter is fully opened, and the shutter has not been closed since the flash. Because the exposure time required for portraits at night is often around 1 second, or even longer, the shutter is still open for a long time after the flash flashes to feel the night light. If the subject moves, the background part that was originally blocked by people will face the camera and continue to be exposed, so that the portrait part of the photo taken is transparent or translucent. Therefore, the main body should remain unchanged until the shutter is closed.

In fact, it is not too difficult to take portraits at night, as long as the following conditions are met:

(1) Try not to use a "fool" camera; Low-level or intermediate "fool" cameras will automatically flash when the scene is dark. The flash of this kind of camera is not enough light, which leads people to be in an almost completely black environment, or the background is completely black, and people (especially their faces) are so white that even their eyes and nose can't appear. Therefore, it is necessary to use a camera with the function of manually adjusting the aperture and shutter time, even if it has the shutter priority and aperture function, it should be adjusted to manual shooting.

(2) Don't trust the "night scene mode" too much. At present, some "smart" cameras have "night scene mode", but this mode can only set the focal length at infinity, so it can't be used to shoot portraits at night, otherwise the scenery must be clear and the portraits loose.

(3) Use a tripod. Because the spotlight is dark at night, it is often necessary to use a larger aperture and a longer exposure time. If you use a hand-held camera for "long exposure" shooting, it is almost difficult to avoid camera jitter. When the camera is fixed with a tripod, even if the shutter speed is several seconds, the camera will not move.

(4) flash. Flash lighting has a characteristic, that is, it is near but not far, which is of course limited by "inverse square law". Therefore, when a person is 3 to 5 meters away from the lamp and the scene distance is 15 meters, the flash light received by the scene is only one tenth or one tenth of that of the person, which basically does not work. If you want to reflect the three-dimensional effect of portraits, you must prepare more than two flashlights.

Meet the above conditions, you can take a portrait at night. The specific method is:

(1) Take a photo first. After arriving at the scenic spot, first look for the scenery worth shooting and determine it within the shooting range.

(2) Expose the night scene in the background to determine the exposure combination. Because it is dark at night, cameras with built-in metering devices often cannot measure specific data according to the conventional ISO 100 film speed. Exposure can be carried out at the film speed of 1600 or even 3200, and then gradually converted to the film speed of 100, and then ... > >

Question 6: I bought a nice Nikon p500 telephoto camera. Why didn't I take the good photos I imagined? The night view of Shanghai Bund needs long-term study and experience. Photography can't be learned in a day or two!

Question 7: The exposure of shooting night portraits. It is difficult to take a portrait at night, because it is necessary to consider the normal exposure of the foreground background and how to make the image of the foreground person take a clear picture. Indeed, this is one of the problems that most tourists encounter when visiting the night scene.

Especially when using the camera to shoot automatically, turn on the flash when shooting, so that people close to the camera can get the correct exposure. However, due to the limited flash range and short exposure time of the camera, the night scene that was originally gorgeous to the naked eye appears dark in the camera.

This is because the night scene in the distance takes a long exposure time to leave a normal exposure effect on the photo, while people nearby only need a short exposure time because of the flash. Therefore, it is best to use the manual gear of the camera when shooting, slow down the shutter and force the flash to shoot. After the flash is over, it is suggested that the characters keep their original posture until the end of exposure, so that the photos of the characters and the background night scene can be exposed normally. However, portrait shooting at night is not a patent for manual cameras. Some advanced automatic fool digital cameras have night portrait shooting mode, which is also set by using the principle of slow shutter and forced flash.

When shooting, you need to use a tripod to fix the camera, because it is necessary to keep the camera still when exposing the background for a long time, and then a tripod becomes a necessity.

Use slow shutter and flash to shoot portraits at night, so that the foreground and background are exposed clearly.

Before shooting, you should explain clearly to the subject. Just because the flash is on doesn't mean the shooting is over. You must keep your original posture and position until you are told that you can change or leave. For curtain shutter, the flashing flash is a sign that the front curtain reaches one end of the film window and the power is turned on, but Hou Lian has not yet reached the film window (shutter time synchronization).

special

When shooting with high shutter speed and flash, the foreground characters are often exposed normally and the background is underexposed.

The exposure ends only when Hou Lian reaches the closed position through the film window. For the shutter in the mirror, the flash flashes at the same time when the shutter is fully opened, and the shutter has not been closed since the flash. Because the exposure time required for portraits at night is often around 1 second, or even longer, the shutter is still open for a long time after the flash flashes to feel the night light. If the subject moves, the background part that was originally blocked by people will face the camera and continue to be exposed, so that the portrait part of the photo taken is transparent or translucent. Therefore, the main body should remain unchanged until the shutter is closed.

In fact, it is not too difficult to take portraits at night, as long as the following conditions are met:

1. Try not to use a "fool" camera. If the scene is dark, the lower or intermediate "fool" camera will automatically flash to make up for it. The flash of this camera is not enough for people, and the scenery is not enough, which makes people in an almost completely black environment, or the background is completely black, and people (especially faces) are dead white, so that even eyes and nose cannot appear. Therefore, it is necessary to use a camera with the function of manually adjusting the aperture and shutter time, even if it has the shutter priority and aperture function, it should be adjusted to manual shooting.

2. Don't trust the "night scene mode" too much. At present, some "smart" cameras have "night scene mode", but this mode can only set the focal length at infinity, so it can't be used to shoot portraits at night, otherwise the scenery must be clear and the portraits loose.

Step 3 use a tripod. Because the spotlight is dark at night, it is often necessary to use a larger aperture and a longer exposure time. If you use a hand-held camera for "long exposure" shooting, it is almost difficult to avoid camera jitter. When the camera is fixed with a tripod, even if the shutter speed is several seconds, the camera will not move.

4. Flash. Flash lighting has a characteristic, that is, it is near but not far, which is of course limited by "inverse square law". Therefore, when a person is 3 to 5 meters away from the lamp and the scene distance is 15 meters, the flash light received by the scene is only one tenth or one tenth of that of the person, which basically does not work. If you want to reflect the three-dimensional effect of portraits, you must prepare more than two flashlights.

Meet the above conditions, you can take a portrait at night. The specific method is:

1. Take a picture first. After arriving at the scenic spot, first look for the scenery worth shooting and make sure it is within the range of taking pictures.

2. Expose the night scene in the background and determine the exposure combination. Because it is dark at night, it is often impossible to measure specific data if the camera with built-in metering device follows the conventional ISO 100 film speed. You can press 1600 or even 3...> & gt

Question 8: How to set the aperture in the manual mode of night SLR shooting? The exposure time of F8- 16 is not fixed, but it usually takes more than 10 second. You need to adjust it according to your lighting conditions at that time.

Since a tripod is used, the sensitivity must be adjusted to a minimum so that the picture can be clean and transparent.

Shooting at night also depends on the weather, the first sunny and windy weather, because the pollution is serious now, and the sky is foggy and opaque when there is no wind.

Question 9: How to take night portrait photos with SLR? It is difficult to shoot a portrait at night, because we should consider the normal exposure of the foreground background and how to make the influence of the foreground people clear. Indeed, this is one of the problems that most tourists encounter when visiting the night scene. Especially when using the camera to shoot automatically, turn on the flash when shooting, so that people close to the camera can get the correct exposure. However, due to the limited flash range and short exposure time of the camera, the night scene that was originally gorgeous to the naked eye appears dark in the camera. This is because the night scene in the distance takes a long exposure time to leave a normal exposure effect on the photo, while people nearby only need a short exposure time because of the flash. Therefore, it is best to use the manual gear of the camera when shooting, slow down the shutter and force the flash to shoot. After the flash is over, it is suggested that the characters keep their original posture until the end of exposure, so that the photos of the characters and the background night scene can be exposed normally. However, portrait shooting at night is not a patent for manual cameras. Some advanced automatic fool digital cameras have night portrait shooting mode, which is also set by using the principle of slow shutter and forced flash. When shooting, you need to use a tripod to fix the camera, because it is necessary to keep the camera still when exposing the background for a long time, and then a tripod becomes a necessity. When shooting portraits at night with high shutter speed and flash, the foreground figures are usually exposed normally and the background is underexposed. Before shooting, you should explain clearly to the subject. Just because the flash is on doesn't mean the shooting is over. You must keep your original posture and position until you are told that you can change or leave. For curtain shutter, the flashing flash is a sign that the front curtain reaches one end of the film window and the power is turned on, but Hou Lian has not yet reached the film window (shutter time synchronization). The exposure ends only when Hou Lian reaches the closed position through the film window. For the shutter in the mirror, the flash flashes at the same time when the shutter is fully opened, and the shutter has not been closed since the flash. Because the exposure time required for portraits at night is often around 1 second, or even longer, the shutter is still open for a long time after the flash flashes to feel the night light. If the subject moves, the background part that was originally blocked by people will face the camera and continue to be exposed, so that the portrait part of the photo taken is transparent or translucent. Therefore, the main body should remain unchanged until the shutter is closed. In fact, it is not too difficult to take a portrait at night, as long as the following conditions are met: (1) Try not to use a "fool" camera; Low-level or intermediate "fool" cameras will automatically flash when the scene is dark. The flash of this kind of camera is not enough light, which leads people to be in an almost completely black environment, or the background is completely black, and people (especially their faces) are so white that even their eyes and nose can't appear. Therefore, it is necessary to use a camera with the function of manually adjusting the aperture and shutter time, even if it has the shutter priority and aperture function, it should be adjusted to manual shooting. (2) Don't trust the "night scene mode" too much. At present, some "smart" cameras have "night scene mode", but this mode can only set the focal length at infinity, so it can't be used to shoot portraits at night, otherwise the scenery must be clear and the portraits loose. (3) Use a tripod. Because the spotlight is dark at night, it is often necessary to use a larger aperture and a longer exposure time. If you use a hand-held camera for "long exposure" shooting, it is almost difficult to avoid camera jitter. When the camera is fixed with a tripod, even if the shutter speed is several seconds, the camera will not move. (4) flash. Flash lighting has a characteristic, that is, it is near but not far, which is of course limited by "inverse square law". Therefore, when a person is 3 to 5 meters away from the lamp and the scene distance is 15 meters, the flash light received by the scene is only one tenth or one tenth of that of the person, which basically does not work. If you want to reflect the three-dimensional effect of portraits, you must prepare more than two flashlights. Meet the above conditions, you can take a portrait at night. The specific method is: (1) Take photos first. After arriving at the scenic spot, first look for the scenery worth shooting and determine it within the shooting range. (2) Expose the night scene in the background to determine the exposure combination. Because it is dark at night, cameras with built-in metering devices often cannot measure specific data according to the conventional ISO 100 film speed. It can be exposed at the film speed of 1600 or even 3200, and then converted into 1 ... >; & gt