Undergraduate graduation thesis task book

Task book for undergraduate graduation thesis (7 selected articles)

The intense and fulfilling university life is coming to an end, and students have to pass the final graduation thesis before graduation. Graduation thesis is a prepared and planned form, which is used to test students' learning achievements. How to focus on graduation thesis? The following is the task book of my undergraduate thesis. Welcome to share.

Undergraduate graduation thesis task thesis 1 graduation design (thesis) topic: preliminary study on internet bar marketing

The work content and basic requirements of graduation project (thesis) (objectives, tasks, methods, original materials (data), reference materials (documents), design technical requirements, matters needing attention, etc.). If there is not enough paper, please add more pages.

Goal:

By comprehensively applying the theoretical knowledge learned by the graduation thesis writing club, especially the management theory in "Internet Cafe Marketing", and combining with the collection and utilization of relevant materials, this paper analyzes the fierce market competition in Internet cafes, especially the situation caused by peer challenges in local Internet cafes, analyzes the advantages and disadvantages, and finds solutions to the problems for the reference of relevant units. It is necessary to reflect the learning and application level of professional knowledge, innovative spirit and practical ability through graduation thesis.

Task:

1, complete the "opening report" according to the requirements of the topic and task book;

2. Collect, study and use the literature extensively, and construct the thesis framework under the guidance of the tutor;

3. Seriously carry out social practice, enrich the content of the paper through the case of Internet cafe management, and enhance the persuasiveness;

4. Communicate with the tutor regularly as required and complete the thesis under the guidance of the tutor;

6. Print the paper according to the prescribed format and prepare the thesis defense.

Ways and means:

Consulting relevant materials, conducting social research, innovating ideas and methods of network management through personal thinking and guidance of tutors, so as to provide reference for improving and improving the management level of enterprises.

Progress and stage results:

1, 20xx65438+February xx-20xx65438+1October 13, select the topic and receive the tutor's "task book";

2.20xx Submit the opening report from February 2/KLOC-0 to March 2;

3.20xx February 25th to May 25th, writing graduation thesis.

4, 20xx May 22-May 24, thesis defense;

Raw materials to be mastered:

1. Fill in the "Teaching Log" in time;

2. Theoretical knowledge about management principles, basic knowledge of market research and forecasting and marketing planning, especially management science;

3. Carry out social practice and conduct market research on the operating conditions of Zhengzhou Internet cafes;

4. Collect typical cases of management and application of Internet cafes.

Undergraduate graduation thesis assignment 2 1, the main tasks and objectives of the thesis.

(This part can explain what problems this article is going to solve and what conclusions can be drawn. )

In recent years, with the economic development and social progress, the number of single-parent families, a special group, has increased year by year, resulting in a series of problems that have had a great impact on society and families. Therefore, this paper analyzes the current situation and main problems of single-parent families through investigation and study, and then puts forward some suggestions and opinions in combination with the policies of developed countries, hoping to improve the living conditions of single-parent families and improve their quality of life.

2. Basic requirements of design (thesis)

Thesis writing should be completed independently under the guidance of the tutor, and guided by Marxist theory, in line with the relevant principles and policies of the party and the state; The paper should be focused, clear in level and reasonable in structure; Must have correct views, sufficient arguments, clear organization and fluent writing; And can conduct in-depth analysis and unique insights. At the same time, the number of words in the paper is not less than 8,000 words, and there should be an abstract of the paper of about 300 words, with 3 to 5 keywords (arranged from high to low according to the expansion degree of the entry). Finally, a bibliography and a thank-you note are attached.

3. The main content of the design (paper)

The following article takes "the analysis of the present situation and development trend of outdoor media in Beijing communities" as an example:

The full text is divided into five parts to study the present situation and development trend of outdoor media in Beijing communities. The first part will explain the significance of studying community outdoor media: the development of social economy and science and technology has promoted the rapid development of outdoor media, but the community outdoor media has not given full play to its propaganda and service functions.

The second part will summarize the characteristics and present situation of outdoor media in Beijing communities, so that people can understand the present situation of outdoor media in Beijing communities. The third part will analyze the factors that restrict the development of community outdoor media in Beijing, and discuss various factors that restrict the development of community outdoor media.

The fourth part will be the key part of this paper: according to the current social and economic development and scientific and technological level, predict the development trend of community outdoor media, and focus on introducing dozens of new media and their new technologies that will be widely popularized in the community.

The fifth part will draw the conclusion of this paper: by predicting the development of Internet, wireless communication and digital video technology, it is concluded that the new outdoor media in the community will be integrated with other media to become a real multimedia, which will eventually support the visual and tactile control technology of the emerging virtual system.

4. Main references

[1][ plus] Eric McLuhan. The essence of mcluhan [M]. Trans. He daokuan Nanjing: Nanjing University Press, 2006: 311-315.

[2] Pei Chen loves Qin. Advertising media course [M]. Beijing: Peking University Publishing House, 2005: 156- 160.

[3][ America] John Pavlic. New Media Technology-Cultural and Commercial Prospects [M]. Translate Zhang Jinggang. Beijing: Tsinghua University Publishing House, 2005: 329-33 1.

[4] Terry K. gamble forced Kerr gamble. Effective communication [M]. Translated by Xiong Tingting. Beijing: Tsinghua University Publishing House, 2005: 442.

[5] Jiang Jian. Introduction to new media [M]. Shanghai: Shanghai Jiaotong University Press, 2006: 89.

[6] Zeng Xiaotong. International advertising [J]. Channel Feast-Detailed Explanation of Outdoor Media Market in 2007 February 2008 (194):116.

[7] Lin xufeng International advertising [J]. Looking Back: Talking about Outdoor Advertising in 2006-2007, April 2007 (184)

[8] H. Morris, D. F. Kuratek. Enterprise entrepreneurship: the development of entrepreneurship within the organization. New york, Harvard University Press, 200 1

[9] Antonic B, Hisrich RD. Internal Entrepreneurship: Structural Optimization and Cross-cultural Verification [J]. Journal of Business Risk, 200 1, 16(5)

5. Schedule

Name of each stage of design (paper)

Start and end dates

1, determine the specific topic.

2. Write and submit the opening report and participate in the opening of the paper.

3. Prepare materials and write revised papers.

4, the paper will be done, printed and bound, and prepared for defense.

5, thesis defense

Task book for undergraduate graduation thesis 3 I. Main tasks and objectives:

Based on the experience of Wal-Mart, the main task and goal of this paper is to study how to solve the existing bad conflicts between suppliers and retail enterprises in China chain retail industry, establish a harmonious long-term cooperative relationship, and then realize the breakthrough of chain retail industry in China, so as to make it bigger and stronger and go global.

I hope that through this graduation thesis, I can comprehensively use what I have learned and independently search, analyze and translate foreign language materials according to the writing direction of the thesis; According to the research and application status at home and abroad, we can independently propose, analyze and solve problems.

Second, the main content and basic requirements:

This paper studies the application of supply chain management in chain retail enterprises in China. Firstly, the basic theory of supply chain is introduced. This paper focuses on supplier relationship management, combined with Wal-Mart's supply chain practice in China retail market. The basic requirement of this paper is to be close to real life, and the suggestions put forward at last are also desirable.

Basic requirements for thesis writing:

1, according to the research direction of the paper, search and analyze the literature independently;

2. Be able to independently retrieve, translate and analyze foreign materials;

3. With reference to the research status and achievements at home and abroad, independently analyze, write and complete a complete graduation thesis.

Third, the schedule:

12.9 determine the topic of the paper, collect data and prepare the opening report.

1.5 complete the opening report

1.6 Prepare literature review and English translation.

1.2 1 Complete English translation.

1.22 collate data and prepare literature review and text.

3.20 Complete literature review and text.

4.20 Submit the first draft of the paper

5. 15 Submit the revised paper.

5.28 Complete the full text of the paper

Undergraduate graduation thesis task book 4 I. Main tasks and objectives:

The topic of this design is the structural design and frame structure of Jinyun postal production building, with 5 floors above ground and 6 floors locally. This graduation project should independently complete the structural design of the building. The calculation book is mainly completed by hand, supplemented by PKPM check, and the check part should include the internal force calculation results, beam slab column reinforcement calculation results and other basic contents. Through the mutual check of the two calculation results, the final calculation result is obtained, and the AUTOCAD structure construction drawing is drawn, and the WORD document or handwritten text is used as the design calculation book.

Second, the main content and basic requirements:

(1) Main contents

Each person must independently complete at least 8 structural construction drawings of A2 or A 1 specifications, and complete structural design calculation (the frame, continuous beam, foundation and slab calculated by each student in the group are different).

1, structural design overview

2, pile and foundation layout, pile caps details.

3. Structure diagram.

4. Details of structural members (awnings, gutters, frames, balconies, handrails, etc.). ) and the reinforcement of coupling beams and plates.

5. Details of stair reinforcement.

(2) Design requirements

1. Structure: reinforced concrete frame structure.

2. Foundation: pile foundation

3. Seismic fortification intensity and load: six degrees (according to the structural fortification), and the floor load is taken according to the load specification.

4. Brick masonry: porous cement bricks are used above the ground and solid cement bricks are used below the ground.

5. Calculation sheet: written (formally bound, A4 specification), mainly including: determination of frame calculation sheet, load value, internal force calculation and combination, frame beam-column section calculation, foundation pile and cap calculation, floor slab section calculation, stair reinforcement calculation and other structural components (awning, eaves gutter, etc.). ).

6. The completion of the above calculation book is mainly based on manual calculation, supplemented by PKPM check, and the check part should include the internal force calculation results, beam slab column reinforcement calculation results and other basic contents.

The calculation book has clear thinking, clear organization, proper steps, correct calculation, smooth text description, complete drawing and clear identification. The calculation book should include abstract, table of contents, text, thanks, references, etc.

Third, the schedule:

The whole design started from March 20th, 20021year to June 8th, 20021year, ***x weeks.

The first week: write the task book and the opening report;

The second week: the plane layout of floor and roof slab and the load calculation of beam and slab;

The third week: calculation and drawing of internal force of beam and slab and reinforcement of floor and roof;

Week 4: Frame Load Calculation

The fifth week: frame internal force calculation and reinforcement;

Week 6: Frame reinforcement and construction drawing;

Week 7: PKPM inspection;

Week 8: Calculation of foundation reinforcement and pile cap reinforcement.

Week 9: Draw the layout plan of pile foundation and the reinforcement plan of pile cap;

Week 10: Calculation and drawing of coupling beams;

Week 1 1: calculation and drawing of stairs;

Week 12: Calculation and drawing of details of awning, gutter and other nodes;

Week 13: design overview;

Week 14: Arrange the calculation book.

Week 15: print calculations, draw pictures, and prepare for defense.

Chapter 5: Mistranslation of Chinese film titles and English film titles and its countermeasures.

English film titles: a brief analysis of mistranslation of English film titles and its countermeasures.

Topic source: □ Teacher's research topic □ Teacher's designation √ Student's self-drafting □ Other.

Basic tasks:

The theme of this thesis is the mistranslation of English film titles and its countermeasures, and the research direction is translation direction.

Students are required to analyze the characteristics and functions of English film titles, and try to study the mistranslation of English film titles and its countermeasures in combination with translation principles and methods. This paper discusses the causes of mistranslation, taking the mistranslation of English film titles as an example, and probes into the mistranslation phenomenon and its countermeasures. Based on the research of scholars at home and abroad, this paper puts forward the translation principles and methods of English film titles to reduce the occurrence of mistranslation.

Strictly standardize the paper format, and plagiarism is strictly prohibited. Starting with the mistranslation of English movie titles, this paper studies the characteristics and functions of English movie titles, analyzes the causes of mistranslation, and studies the translation principles and methods of English movie titles, so as to reduce mistranslation and improve the translation level of English movie titles.

Finish a paper of 3000-5000 words within the specified time, and discuss the mistranslation of English movie titles and its countermeasures from the perspective of translation.

Start and end time of phased main work

1, preparation xx, 10, 13 6, paper writing xx, 1.

2. Select the topic xx,10,30-11,15 7, and complete the first draft xx, 3, 15.

3. Data collection xx, 1 1,16-1,30 8, revision and finalization xx, 4 and 26.

4. Opening report xx, 12,1-kloc-0/2, 15 9, reply xx, late May.

5. Thesis outline xx, 12, 16- 12, 20 10, other works xx and June.

Last time for students to finish their papers: April 26th, xx.

Time for students to accept tasks: xx years 165438+ 10/6.

The main contents of task book 6 of undergraduate graduation thesis are as follows:

According to the basic theories and methods of e-commerce, combining the characteristics of e-commerce development in today's society and the development direction of internationalization and networking of e-commerce is the research direction of this paper.

Basic requirements: the paper format is correct and meets the requirements; Submit papers and related materials in time.

Main reference materials:

Introduction to e-commerce, e-commerce network marketing, marketing, e-commerce laws and regulations, e-commerce network construction, economics foundation, e-commerce case analysis, business weekly, Internet, etc.

Completion period: 20xx years

Instructor's signature:

Signature of the person in charge of the review team:

Graduation Design (Thesis) Opening Report Form

Research on e-commerce network marketing strategy of small and medium-sized enterprises

Instructor Meng Gang

Name of student: Zhang Haifeng Student ID 2007060 15 E-commerce major.

Choose your own topic according to the scope given by the instructor.

Second, the design purpose:

As a new business model and enterprise management mode, e-commerce plays a very important role in expanding business, improving competitiveness, improving supply chain and cultivating new economic growth points. However, as far as the application of e-commerce in small and medium-sized enterprises is concerned, there are still some problems such as insufficient understanding of e-commerce, backward facilities, ineffective implementation, lack of planning and insufficient globalization. This paper will discuss and study this.

Third, the design ideas:

According to the above purposes, this paper first analyzes the status quo and characteristics of e-commerce model of small and medium-sized enterprises, and divides e-commerce model into online stores/services, online brokers and value chain service providers. Secondly, the above-mentioned e-commerce models are analyzed and compared from three dimensions: horizontal value chain, vertical value chain and information content. Finally, the shortcomings of the current e-commerce model of small and medium-sized enterprises are put forward, and the development trend of e-commerce model is discussed and studied by introducing knowledge value chain on the basis of analyzing the development mechanism of value chain.

Four. Phase content and progress of task completion:

The second stage: 2009165438+1October 21-165438+1October 30, the opening report was written, submitted and reviewed by the tutor. The fourth stage: 20101October1October1October11October to communicate with the tutor and revise the thesis.

Stage 5: Finalize and submit the formal graduation design results before April 20 10.

The influence of international standards for Tibetan coding on the development of Tibetan culture.

Student name

xxx

Departments and majors

Xxxx yuan

Xxxx major

teacher

xxx

Purpose and significance of topic selection: Minority languages and their national cultures are an important part of the big family culture of the Chinese nation, and at the same time, they are inextricably linked with the national cultures of the world. Facing the increasingly close social development reality of political, economic and cultural exchanges among ethnic groups, and facing the open world, the informatization of minority languages, especially the informatization of cross-border ethnic languages, has a positive role that can not be ignored in improving China's international status and expanding China's international influence. The theoretical research on minority language informatization, the development and utilization of minority language resources and the research on information processing technology are related to the implementation of minority language policies, the study, use and development of minority languages, the scientific development of minority language information technology, the rise and fall of national culture, the promotion of the prosperity and development of all ethnic groups, and important social issues involving national stability and security and international influence. Therefore, it is of great social and scientific significance to speed up the informatization process of minority languages.

Research status and development trend of this topic at home and abroad;

According to the information retrieved from the Internet, the national and international standards for Tibetan coding were officially launched in the early 1990s. With the sincere cooperation and efforts of experts from relevant research institutions and universities in Xizang Autonomous Region, the international standard of Tibetan coded character set has finally become the first international standard of minority languages in China. The Tibetan coding scheme has realized reasonable inheritance and innovation in the cognition of traditional Tibetan morphemes and the processing of computer character coding, which embodies the organic combination of localization and internationalization of Tibetan application development. The official opening of Tibetan coding standards in various fields of Tibetan information processing will promote Tibetan to play a more extensive and positive social role in the development of information technology and international exchanges, push the use and development of Tibetan to a new level, and serve the construction of material civilization and spiritual civilization in ethnic minority areas.

Main research contents:

The research and formulation of the proposal for the formulation of international standards for Tibetan coding mainly involves four aspects; That is, the formulation of vocabulary, word order, names of people and related rules. Vocabulary is to determine the range of words, word order is to determine the coding and position of characters, character name is to give each character a standard and clear name, and relevant rules are to give a series of technical implementation rules.

scheduling

2021-1-19-2021-1-22 Determine the topic of the paper and fill in the task book.

2021-11-23 —— 2021-1-30 graduation design (thesis) assignment and progress

2021-12-01-2021-12-20 Search for information and write an outline of the paper.

2021-12-21-2022-03-31Complete the overall design of the system.

2022-04-01—— 2022-04-15 Improve the system and complete the first draft.

April 2022-16 —— April 25, 2022 The second draft was submitted to the teacher for approval.

2022-04-26—2022-05-03 Complete the final draft of the paper and submit it to the teacher for review.

2022-05-04—2022-05-07 Application for Defense

2022-05-08—2022-05- 12 thesis defense

Conditions, methods and measures for completing the thesis;

1, collect a lot of data.

2. Study hard, be diligent in practice, be brave in innovation, often report the situation to the instructor, and listen to the opinions of the instructor with an open mind.

3. Strictly follow the laws of scientific research and abide by scientific research ethics.

4. Carefully complete the design report.

Lecturer's comments and suggestions

Signature: XXX

XXXX，XXXX，XX，XX

Opinions of the leading group for examination and approval of graduation thesis (design):

Signature: XXX

XXXX，XXXX，XX，XX

Note: this form is filled in by students and signed by the instructor, and then submitted to the graduation thesis (design) leading group of the college (department) for approval. This form is used as the basis for graduation thesis (design) grading.

;