Video tutorial on how to fold a wheelchair

The video tutorial on how to fold a wheelchair is as follows:

1. First, unfold the wheelchair and hold it with both hands, so that the left and right frames are slightly separated. Gently press both sides of the seat cushion with the palm of your hand to the positioning position, and the wheelchair will be unfolded. Then clamp the toilet into the seat tube, press down the four positioning blocks, and insert the toilet into the track.

2. Then turn the left and right pedals upward to pull out the toilet, pull open the four positioning blocks of the toilet and take them off the toilet, and gently lift the middle of the toilet with both hands to fold it.

3. If it is necessary to adjust the pedals on the wheelchair, please use the matching tools to loosen the locking bolts or nuts. After adjusting to the appropriate position, it can be locked.

When carrying out the above steps, we need to pay attention to that if it is necessary to adjust the pedals on the wheelchair, please use the matching tools to loosen the locking bolts or nuts. After adjusting to the appropriate position, it can be locked. These are the steps to fold the wheelchair.

The most important consideration when choosing a wheelchair is the size of the wheelchair. The main load-bearing parts of wheelchair users are around hip ischial tubercle, femur, fossa and scapula.

The size of the wheelchair, especially the width and depth of the seat, the height of the backrest and the distance between the pedal and the seat cushion, will affect the blood circulation of the relevant parts of the occupant, causing skin abrasions and even pressure sores. In addition, we should also consider the patient's safety, operational ability, the weight of the wheelchair, the place of use, appearance and other issues.

Before the wheelchair is used and within one month, check whether the bolts are loose. If it is loose, tighten it in time. Check every three months in normal use to ensure that all parts are in good condition. Check all kinds of fastening nuts on the wheelchair (especially the fastening nuts on the rear axle), and adjust and tighten them in time if they are loose.