Yidu to Enshi Travel Guide Yichang to Enshi to road trip Travel Guide

1. Brief introduction of Yichang to Enshi go on road trip

Wuhan-Yichang (Changyang)-Enshi-Lichuan, which route best meets the requirements of the topic? Four hours to Yichang, Wuhan, where there are Three Gorges Dam and Three Gorges Family, Quyuan Temple in Zigui, Hubei, and Qingjiang Gallery in Changyang, Hubei. It is recommended to stay at Changyang River for one night, and it takes about 4-5 hours from Yichang to Enshi. The scenic spots in Enshi include Tusi City, Enshi Grand Canyon, Tenglong Cave and Yumuzhai in Lichuan City, which takes at least 2 days.

2. How to get to Enshi from Yichang?

Driving route: the whole journey is about 205.5km.

Starting point: Yichang City

1. Yichang driving plan

1) Drive southwest for 20 meters from the starting point and turn left into Jiangyan Road.

2) Drive along Yanjiang Yanlu for 7.4 kilometers and turn left into Jiangjing Third Street.

3) Drive along Jingsan Street along the Yangtze River for 220 meters and turn right into Yiling Avenue.

4) Drive along Yiling Avenue 1.3km and go straight into Wulin Road.

5) Drive 2.3km along Wulin Road, pass the Ding Xin Building on the left, and go straight into _ Pavilion Avenue.

6) Drive along _ Pavilion Avenue for 7.4 kilometers, turn left and drive in the direction of G50/S63/S68/ Zigui.

7) Drive 180m, turn right ahead and take the ramp.

2. Drive along the ramp for 220 meters and go straight into the Shanghai-Chongqing Expressway.

3. Drive along Shanghai-Chongqing Expressway 156.4km, turn right at Hongyan Temple/Jianshi /G3 18 exit and enter Hongyan Temple Interchange.

4. Drive along Hongyan Temple Interchange 1.0km, turn left and enter S339.

5. Driving plan of Enshi Tujia and Miao Autonomous Prefecture

1) Drive along S339 14.5km and go straight into Wangjiazhai Tunnel.

2) Drive along Wangjiazhai Tunnel for 550 meters, turn right ahead and enter S339.

3) Drive along S339 12.2km, turn right ahead and enter Yandun Avenue.

4) Drive along Yandun Avenue for 220 meters, pass Xiaogan Laopeng Department Store on the left for about 260 meters, and then turn left into Zhou Ye Avenue.

5) Drive along Zhou Ye Avenue 1. 1 km, turn right and enter Jianshe Road.

6) Drive along Jianshe Road 170 meters to the finish line (on the left side of the road).

End point: Jianshi County

3. road trip Raiders Route from Yichang to Enshi

Distance:1683km; Time: 1 day and 4 hours

Lan-Liuzhong Expressway Entrance An-Liuzhong Expressway National Road 3 12 Kongtong Avenue (East Section) Donghu Road Luohandong/Fengkou Yinfu Expressway Airport Expressway Tongguan/Shangluo/Baoji/Huancheng Expressway Hansenzhai/Lantian/Shangluo/Shangnan National Road 209/E Road Shanghai-Shaanxi Expressway Erguang Expressway Xiangjing Expressway Jingyi Expressway Yichang/Gaojia

4. Travel strategy from Yichang to Enshi

From Yichang to Enshi, if you take the expressway, you can get there in 5 hours. On February 9, 65438, I walked from Yichang to Enshi for 7 hours. Because a person walked at a low speed for three hours and was delayed.

5. Yichang self-driving Enshi route query

Driving route: The whole journey is about 1047.8km, and the toll in expressway is generally 0, 45 yuan per kilometer, but the distance from Yichang to Enshi is 0.8 yuan per kilometer, so the toll is about 600 yuan.

Starting point: Wuhan

1. Wuhan city driving plan

1) Drive 20 meters southeast from the starting point and turn left into Jiangyan Road.

2) Drive 420 meters along Yanjiang Road and turn left into Sanyang Road.

3) Drive along Sanyang Road for 960m and turn left into Jiefang Avenue.

4) Drive 8.0km along Jiefang Avenue and go straight into G 107.

5) Drive along G 107 for 740m and go straight into G3 18.

6) Drive along G3 18 for 2.0km, turn right ahead and enter Hanyang Avenue.

7) Drive along Hanyang Avenue for 4.2km, turn right slightly and enter the Third Ring Road.

2. Drive along the Third Ring Road1.4km and go straight into expressway, Han Cai.

3. Drive along Han Cai expressway for 34.9 kilometers and go straight into Hanyi expressway.

4. Drive along Hanyi Expressway for 246.0km and go straight into Hu Rong Expressway.

5. Drive along Shanghai-Chengdu Expressway for 45.8km, turn left and enter G3 18.

6. Follow G3 18 166. 1 km, then turn right and enter the Shanghai-Chongqing Expressway.

7. Drive along Shanghai-Chongqing Expressway 66. 1km, turn left and enter G3 18.

8. Drive along G3 18 for 6.7 kilometers, then turn left and enter G209.

9. Follow G209 for 3. 1 km and go straight into G3 18.

10. Follow G3 18 for 62.4 kilometers and go straight into Jianxin Road.

1 1. Drive along Jianxin Road for 2.3km and go straight into G3 18.

12. Doctor; doctor

15. Chongqing driving plan

1) Drive along Luyou Avenue for 3.2 kilometers and go straight into Huanghuayuan Bridge.

2) Drive along Huanghuayuan Bridge for 2.2km, turn right ahead and get on Huanghuayuan overpass.

3) Drive along Huanghuayuan overpass for 270 meters and turn right into Beiqu Road.

4) Drive along Beiqu Road for 370 meters and turn right into Renmin Road.

5) Drive along Renmin Road for 740 meters and turn left slightly.

6) Drive 10 meter and turn left slightly.

7) Drive 50 meters and turn slightly to the right.

8) Drive 50 meters to the finish line.

Destination: Map of Chongqing

This data comes from the map, and the final result is subject to the latest data of the map.

6. Yichang-Enshi go on road trip route

National Highway 3 18 starts in Shanghai and ends in Shigatse, Tibet.

National Highway 38, also known as Sichuan-Tibet Line, refers to the highway from Shanghai to Nyalam, which starts from Shanghai people and has a total length of 5,476 kilometers, and ends at Zhangmu Port on the Sino-Nepalese border in nyalam county, Tibet.

Suzhou, Huzhou, Xuancheng, Wuhu, Chizhou, Anqing, Huanggang, Wuhan, Jingzhou, Yichang, Enshi, Chongqing, Dazhou, Nanchong, Suining, Ziyang and Chengdu are the starting points of the Sichuan-Tibet line, passing through Ganzi, Changdu, Linzhi and Lhasa in Sichuan Province in turn, and finally reaching the end of the 3 18 national highway, namely nyalam county Zhongni in Shigatse.

7. go on road trip Raiders Map from Yichang to Enshi

***238.4 kilometers, 3 hours and 48 minutes 100 yuan.

Enshi station

1 From the starting point, drive southwest along G209/ Yanhe Avenue for 3 19 meters, cross the osmanthus tree for about 50 meters and turn left into Jinziba Road.

2 Go straight along Jinziba Road for 7.8km, turn left and take the ramp (via Enshi Toll Station), head for Yichang/Wuhan, and enter the detailed section of Huyu Expressway /G50.

3 Drive along Shanghai-Chongqing Expressway /G50 for 205.8km, get off at Yichang City/Zigui Exit and enter Fanba Expressway /S68.

4. Drive along Fanba Expressway /S68 14.2km, and leave Yichang City/Peng Lian (via Peng Lian Toll Station). The toll is 100 yuan.

Go straight for 5.7 kilometers, pass Mao Ge Old Duck Soup Yichang No.2 Store for about 150 meters, and then turn right into the detailed section of Shengli No.3 Road.

6 Drive 2. 1km into Yichang city, and reach the detailed section of the destination-238.4km.. The whole journey takes about 3 hours and 48 minutes.

Yichang railway station

8. Wuhan self-driving Yichang Enshi Travel Guide

You can take the high-speed train from Wuhan to Enshi, which usually takes about 4 hours. See where Enshi is.

The nearest relocation station in Enshi is Yesanguan Station in Badong County, and there is high-speed railway station in Badong County. The farthest is Lichuan Station, which is very close to Chongqing.

If you want to walk at a low speed and experience the scenery of National Highway 3 18, it will be even slower. You have to go through Xiantao, Jingzhou, Yichang and other places to get to Enshi.

9. How long does it take from Yichang to Enshi by car?

As of 20 16, 12, from Wuhan to Enshi, the train is about 506 kilometers and the car is about 520 kilometers.

This data comes from Baidu map, and the final result is subject to the latest data of Baidu map.

Driving route: The whole journey is about 519.2km..

Starting point: Wuhan Municipal Government

1. Wuhan city driving plan

1) Drive 30 meters southeast from the starting point and turn right into Jiangyan Road.

2) Drive along YanYan Road for 70 meters and turn right into Yiyuan Road.

3) Drive 770 meters along Yuan Road and go straight into the new road.

4) Drive along the new road160m and turn left into Jiefang South Road.

5) Drive 470 meters along Jiefang South Road and turn right into Stadium Street.

6) Drive along Stadium Street130m, cross the Hong Kong Road overpass and turn left into Jiefang Avenue.

7) Drive 7.3km along Jiefang Avenue, turn left and enter Jianyi Road.

8) Drive along Jianyi Road 160m, drive in the direction of Yinzhiqiao/Longyang Avenue/Qintai Avenue/Jianyi Road, turn left slightly and take the ramp.

9) Drive along the ramp for 250 meters and go straight into the Second Ring Road.

10) Drive along the Second Ring Road 1. 1km, and turn right into Longyang Avenue.

1 1) Drive along Longyang Avenue 1 10 meters, turn right ahead and enter Qintai Avenue.

12) Drive along Qintai Avenue for 30 meters and go straight into Qintai Avenue.

13) Drive along Qintai Avenue 100 meters, take the second exit in the direction of Third Ring Road/Caidian, and go straight into Qintai Avenue.

14) Drive 4.2km along Qintai Avenue and go straight into Qintai Avenue.

2. Drive along Qintai Avenue towards Caidian/Yichang/Zhengzhou/Beijing 100 meters, then turn left into expressway, Han Cai.

3. Drive 34.9 kilometers along expressway, Han Cai, and go straight into the second bridge of Suozihe.

4. Drive 850 meters along the second bridge of Suozihe, and go straight to Shanghai and Chongqing.

8. Drive along Enshi Interchange for 820 meters, turn right and drive towards downtown /G209.

9. Driving Plan of Enshi Tujia and Miao Autonomous Prefecture

1) Drive for 3.6 kilometers and turn left.

2) Drive 1.9 km and turn right into Jinshan Avenue.

3) Drive along Jinshan Avenue 1. 1km and enter Jingui Avenue.

4) Drive along Jingui Avenue for 880 meters and turn right into Xueyuan Road.

5) Drive along Xueyuan Road for 8 10 meters and turn left into Toyota Road.

6) Drive along Toyota Road for 490 meters and turn left into Shizhou Avenue.

7) Drive along Shizhou Avenue for 6 10 meters, pass Midea (Enshi Dafu flagship store) for about 60 meters on the left, and then turn right into Da Qiao Road.

Follow Da Qiao Road 170 meters, then turn left.

9) Drive 40 meters, take the first exit and go straight into Shifu Road.

10) Drive along Shifu Road for 240 meters and turn right.

1 1) Drive 60 meters and turn left.

12) Drive 60 meters to the finish line.

End point: Enshi Municipal Government

From 0 10 to 10 10, the whole journey from Chengdu to Enshi Tujia and Miao Autonomous Prefecture is 777.8 kilometers.

1 From the starting point to the east, drive along Shudu Avenue for 4.8km..

2 Drive 0.2km to Shuangqiaozi overpass in front.

3 Drive 59 meters to the East Fourth Section of the Second Ring Road of Frontier Defense.

4 drive 1. 1km to the east third section of the second border defense ring road.

Turn right and drive along the second section of Chenghua Avenue for 3.4 kilometers.

6 Turn right and enter Chengnan Expressway 135.7 km.

Exit 7, heading for Chongqing, and enter Suiyu Expressway 42. 1 km.

Drive 1 16. 1 km to the front of Chongqing Expressway.

Exit 9, heading for Wanzhou, and enter Inner Ring Expressway 16.7km. ..

10 exit, go to Yichang, enter Chongqing-Yichang Expressway, and drive for 252.5 kilometers. ..

1 Exit to Lichuan, enter G3 18 and drive194.3km. ..

12 Drive 5.5 kilometers to Qifeng Avenue ahead.

13 Drive to Frontier Tusi Road 1.7 km.

14 turn left and drive along Shifu Road for 0.4 km.

15 turn right and drive 0.3 km.

Turn right at 16 and follow G209/ Aviation Avenue for 2 kilometers.

17 drive 1 km to the Enkh border.

Turn right at 18 and follow Wuyang Avenue 1 lane for 0.2 km. ..

The estimated travel time to the destination is about 8- 10 hour.