How to mix puzzle glue?

1. After all the puzzle pieces are put together, prepare a disposable cup of 1:10 hot water.

2. Slowly pour the rubber powder into the water, stir evenly and let it sit for 4-5 hours.

3. After the glue is completely dissolved, slowly pour it on the surface of the puzzle. Just apply glue on the front of the puzzle to get the patterned side! Don’t brush the back! (Brush from the middle to all sides).

4. Use a soft scraper (such as cardboard) to quickly scrape away the glue and try to scrape it evenly from the center to the surrounding sides.

5. Please note that after all brushing is completed, please move the puzzle immediately to prevent it from touching the objects underneath the puzzle.

6. Let it sit for a few hours. After the puzzle is dry, you can pick it up and frame it! Note: Not suitable for use by children, this product is not edible!

Glue powder is provided, which can be used to prepare glue. The glue needs to be thick enough. After the puzzle is put together and placed flat, generally apply it on the front side and apply it evenly. Do not apply it again after one application. If there are clumps, you can leave it open for a while and the clumps will disappear.

If the mix is ??too thin, it will fail. It's best not to use it. If it is too thin, put it in the sun to evaporate the water for a few days, and then use it. Remember to make sure it is thick. Or don’t use it, you can try using office glue instead.