1 degree can you sew beautifully?

1 degree is not suitable for sewing, and sewing is not recommended when the indoor temperature is below 5℃. Too low temperature is not only difficult to glue, but also difficult to cure the seam material. But if the indoor temperature is higher than 35℃, it is not recommended to make beautiful sewing. If the temperature is too high, even the beautiful sewing thread will become soft and collapse, and the finished product will be very poor.

The average daily temperature in spring is above 10℃, and the human body is at a relatively comfortable temperature, so the preservation of decoration materials also saves time and effort. Therefore, in the spring decoration, the quality and efficiency of decoration can also be greatly improved.

In addition, the storage temperature of the sealant should be between 10 -30 degrees. If exposed to the sun for a long time, the material will burst, so be sure to pay attention when storing it. Don't leave the sewing agent in the car for a long time and expose it to direct sunlight.

Matters needing attention in the construction of beautiful seam

Before joint construction, be sure to know the weather and temperature on the construction day. If the ambient temperature is lower than 5 degrees or higher than 35 degrees, it is best not to carry out joint agent construction. If it rains or snows outdoors, it is not suitable for sewing construction.

After the completion of construction, indoor doors and windows must be closed to prevent cold air and rain from entering the room and affecting the sealant. When the sealant is completely dry, you can open the doors and windows for ventilation. If the ambient temperature is lower than five degrees, the sealant should be soaked in suitable hot water for about ten minutes before construction to ensure the bonding effect.