Matters needing attention in monitoring of climbing operation

1, the safety belt used for aerial work and various components shall not be disassembled at will, and the damaged ones shall not be used. The seat belt should be hung on the hook without sharp edges and corners vertically, and it is not allowed to be hung low and used high. It is not allowed to use rope instead, and the bolts must meet the requirements.

2. When using safety helmet, you must wear it firmly and fasten your chin strap.

3. All kinds of ladders used for climbing operations should be firm and placed smoothly. The gradient of a straight ladder is generally 60-70 degrees, and an anti-skid device should be set. There is no tower hook at the top of the ladder. When the foot of the ladder is unstable, someone must be supervised by the escalator. The pull rope of herringbone ladder must be firm, and metal ladder shall not be used near electrical equipment. Ladders should be inspected once a year. If unsafe factors such as explosion are found, they should be repaired or scrapped immediately.

4, in asbestos tile, tile edge plate operations, must be laid solid, non-slip scaffolding. If the working face has a slope, it must be fixed. Pits, wells, ditches, ponds, lifting holes, etc. It must be protected with railings or covered with cover plates, and the cover plates must be firm. When the cover plate needs to be removed due to work, other protective measures must be added.

5, multilayer crossover operation, must wear a helmet, and set up a safety net, it is forbidden to vertical operation.

6. It is forbidden to carry out high-altitude operations under strong winds of magnitude 6 or above or other bad weather conditions, and it is forbidden to carry out high-altitude operations in outdoor thunderstorm weather.

7. Tools, parts and materials used for aerial work must be put into tool bags. Don't hold objects when going up and down; It is forbidden to throw materials and tools at high altitude. Tools and materials that are easy to slide shall not be piled up on the scaffold to prevent falling and hurting people. All kinds of patients who are not suitable for climbing are not allowed to work high above the ground, and those who are drunk, weak, overworked and have poor eyesight are not allowed to work high above the ground.

8. Aerial work personnel must wear personal protective equipment and work shoes (labor insurance shoes) as required. Seat belts and safety ropes should be kept dry and tidy. Store in a ventilated, dry and cool place after use. Avoid contact with corrosive products such as open flame, acid and alkali. Prevent contact with sharp objects, and do not expose yourself to the sun.

9, personal protective equipment used in aerial work, should check to ensure that in good condition before use. And users are required to wear and use it correctly.

10, when working high above the ground, pay attention to the surrounding environment and check whether there is smoke. Sprinklers need to be protected to avoid maintenance troubles caused by careless touch during construction.

1 1, hot work and fire-fighting renovation carried out at the same time as aerial work must go through relevant examination and approval procedures at the same time.