Detailed explanation of Honda Accord lighting joystick

How to adjust the ninth generation Accord lighting, the description and illustration of Accord lighting.

The ninth Accord is equipped with an automatic headlight adjustment system, which can automatically adjust the vertical angle of headlights. If the vertical angle of the headlight changes greatly, there may be a problem with the system.

For the phenomenon that the light is not bright enough, it is suggested to replace a pair of brightness enhancement bulbs, or install xenon headlights, but it must be professional. At present, the modification of xenon lamps on the market should belong to the category of illegal modification. There are two main types of xenon lamp modification: one is to replace only the xenon lamp bulb and install the ballast, and the other is to replace the whole xenon lamp assembly. Although the modified xenon lamp can improve the brightness and distance of lighting, the beam is scattered, which has a great influence on the drivers in the opposite lane.

If it is in rainy and foggy weather, the penetration of this xenon lamp is also very weak, which has great hidden dangers to driving safety. The reason for these negative effects is that this modification method lacks condenser lens, which is an important part of xenon lamp assembly. Xenon lamps without condenser lens can not effectively collect and filter light beams. From an economic point of view, it is suggested to go to a boutique decoration shop to choose some high-brightness light bulbs.

Accord lighting illustration:

How to turn on the lights of the ninth generation Accord, schematic diagram of the light adjustment button of Accord.

Switches: On the control lever, there are two rotary switches, and the light switch on the outside has three gears, namely off- (width indicator) small lamp-headlight (high beam and low beam); The rotary switch inside can control the opening and closing of the front and rear fog lights.

Steering: third gear, left-off-right, with the steering wheel as the dial, push the control lever clockwise to turn on the left turn signal, and then return with the steering wheel after steering, or manually pull back and turn on the right turn signal counterclockwise.

Switch between high beam and low beam: the two gears are generally placed in the position of low beam, based on the steering wheel. After turning on the headlight switch, push it forward. In order to turn on the high beam, at this time, turn on the high beam, and the blue icon on the dashboard is always on. Lift back and turn on the low beam, and the blue icon on the dashboard will go out. In the low beam position, dial back to remind the passing warning light (the high beam is on). When you release your hand, it will automatically return to the low beam position (if the light switch is not turned on, the light will be turned off).