What is the reason why e0 appears after Supor rice cooker cooks for four minutes?

Fault code E0 refers to an internal line fault.

Common fault codes of rice cookers

A, E 1 sensor open circuit:

1. It is possible that the sensor is broken, including leads, plugs and sockets, etc.

2. The weather is too cold and the sensor resistance is too high, which causes the electric pressure cooker to display this code; The processing method can connect a 100K resistor in parallel at both ends of the sensor.

Second, E2 sensor short circuit:

Sensor short circuit fault rarely occurs. Generally, only a new sensor (room temperature 25 degrees sensor 100K) can be replaced.

Third, E3 overtemperature: The bottom of the pot is too dirty and the temperature is too high.

Extended data

Maintenance method of inner container of rice cooker

1. Avoid using a metal spatula to stir the food in the liner, or use a sharp cleaning tool to scrub, and use a cotton rag or sponge scouring pad;

2, the liner should be cleaned in time after use, food residue will rot after being stored for a long time, resulting in oxidation of the liner.

3. In order to reduce the chance of friction, it is recommended not to use the liner to directly wash rice or clean ingredients.