Decoration tips!

I. Hydropower

1 Waterproof construction should adopt coating waterproof.

2, waterproof engineering should be carried out after the completion of concealed engineering construction and acceptance.

3. After the waterproof construction is completed, do two water storage tests.

4. The waterproof layer of the toilet should be no less than1.8m..

5, floor drain, Yin and Yang Angle, pipes and other places to do more waterproof.

6, floor drain to use deodorant floor drain.

7. Hot and cold water pipes are hot on the left and cold on the right.

8. Try not to walk on the ground with a hose.

9. The cold water pipe should have a protective layer of 1CM in the wall, and the hot water pipe is 1.5CM, so the groove should be deep.

10, PPR pipeline installation is to consider the thickness of tiles, so that the pipeline will not be exposed.

1 1. It only takes a few minutes to cook and a long time to wash vegetables. You must buy a vat.

12, the faucet and basin should be matched, otherwise it is not suitable.

13, cement cannot be used for toilet installation, but silica gel is used.

14. Pay attention to the protection of toilets and faucets after installation.

15, when buying a toilet, you should consider the pit distance of the toilet.

16, the washing machine should consider whether it is upper drainage or lower drainage.

17, it is best not to install a telephone in the bathroom, which is easy to get wet.

18, first of all, consider the size of the bathroom mirror, otherwise the mirror headlights are easy to install.

19, it is best to leave a manhole in the bathroom pipeline.

20. Strong current and weak current cannot be worn in the same tube.

2 1, left zero and right ground.

22. The power socket is 300m from the ground, and the switch is1.4m..

Don't install the switch behind the door.

24. More sockets should be fine.

25. 16A socket is used for high-power electrical appliances, such as electric ovens.

26. Use the cassette well.

27. The cassette must match the panel, otherwise it may not be installed.

28. The cross-sectional area of wires in PVC conduit should not exceed 40% of the cross-sectional area of conduit.

29. Don't point the air conditioner in the bedroom at the bed.

30. The air-conditioned tunnel should be tilted outward, or rain will come in.

3 1, try to consider the dual control of lights.

32. It is best to install a splash-proof socket in the bathroom.

33. Consider sockets on the balcony.

34, trough to horizontal flat vertical, take good photos, convenient for future use.

35, public flue to install check valve.

36. When buying electrical appliances, workers must read the instructions.

37, manuals and warranty cards and other information must be properly kept.

Second, masons.

38. Cement cannot be used for more than three months.

39, different varieties and grades of cement can't be mixed.

40, yellow sand must use river sand, just taste it with your mouth.

4 1, the wall and floor tiles should be soaked for more than two hours before being pasted in the shade.

42. Wall tiles should be more than less, otherwise it is easy to produce color difference.

43, a wall can't have two rows of bricks.

44, tile seam cleaning immediately after the completion of cleaning.

45. The ground marble (light color) and the back of the stone are waterproof.

46, Yang Angle cut 45 degrees.

47, floor tile to stick a floor drain, otherwise it is easy to accumulate water.

48. When the wall brick touches the nozzle, it should be cut in the form of a set, so that it looks like a whole brick.

49, the ground marble should be dry shop.

50. Floor tiles must be dirt-resistant and non-slip, not just for good looks.

5 1, matte tiles are difficult to clean.

52. Pay attention to the drainage direction of balcony floor tiles.

Third, carpentry

53. It is best to use dried larch as keel.

54. After buying a big board, you should saw it and dry it.

55, carpentry comes into play first house elevation.

56. Buy a paint brush when the color board comes in to prevent it from getting dirty.

57, ceiling fan can't be installed on the ceiling keel.

58, color panel construction to choose color in advance.

59, ceiling hanger distance from the wall shall not be greater than 300.

60, gypsum board should be fixed with countersunk head tapping screws, into the board 1~2MM, and antirust processing, can't use a gun nail.

6 1, gypsum board nail spacing shall not be greater than 200.

62, gypsum board and wall have 3MM seam, in order to crack prevention treatment.

63. It is best to protect the external corner of gypsum board.

64. Wooden doors should be painted up and down.

65. The bottom of the toilet door cover should be waterproof.

66. The doors should be the same size.

67. Try not to let carpenters make furniture. It can't be done well.

68. Try to buy the whole cabinet. Woodworking is not good, nor is design.

69, the size must be considered, it is more troublesome to change.

70. Don't make a hidden track for your sliding door. There is no way to maintain it in the future.

7 1, if the bathroom is small, try to move the door, don't open the door, it takes up space.

72. If you are not sure about carpentry, you must communicate with the foreman more and never let them make their own decisions.

73. Money is the last word.

74. If you have children at home, use less glass.

75. Be sure to let the workers have a good look at the drawings.

76. Kitchen drawers are very useful.

77. The flatness of the wooden keel of the floor is 5mm.

78, wool floor should be paved with 30 degrees or 45 degrees, leaving 2~3MM between boards, and the joints should be staggered.

79. Leave a seam of 8~ 10MM between the ground and the wall.

80. When the length of composite floor exceeds 8M, expansion joints should be considered.

8 1, try to use MDF as a door cover.

82. Hinges and hardware must be used well.

83. Yuba should be installed on the wooden keel, not directly on the ceiling.

Fourth, the painter

84, dark latex paint construction as far as possible don't mix water, otherwise it is easy to produce color difference.

85, gypsum board joints to bandage.

86. It is best to spread a cool cloth where there is a gap in the wall.

87. It is best to remove some putty from the original wall, or brush it with glue to seal it.

88. Try to buy well-known brands of paints, and try not to use unknown ones recommended by decoration companies or foremen.

89. The weather is too humid, so don't paint it.

90, paint, paint polishing to wait until completely dry.

9 1, the next paint construction must wait until the last paint is dry.

92. The paint on the metal surface should be rust-proof.

93, the weather is too cold, paint construction quality will be poor.

94. When painting the door, stick the hinge and the door lock with masking paper.

It's too hot, pay attention to ventilation.

96, wallpaper, wall oil.

97. When pasting wallpaper, remove the switch and socket panel.

98, bright, mercerized latex paint to complete at a time, prone to color difference.

99. After the baseboard is installed, repair the seam with putty and latex paint.

100, frosted glass should be protected by newspaper.