What about the whistling of the high-rise wind window?

Windy windows in high-rise buildings are whistling, so you can replace the sealing strip and use double-sided adhesive tape.

Windows usually have sealing strips when they are first installed, but after a long time of use, the sealing strips will wear and affect the sealing effect. Replacing the sealing strip with better air tightness can effectively improve the abnormal sound of the window. At present, there are two kinds of sealing strips on the market: one is sealing strip, the other is rubber, and the other is soft hollow rubber material. After closing the window, press the sealing strip to reduce the gap and improve the sealing performance. There is also a sealing strip with a cover, which covers the gap to reduce the inflow of wind.

You can stick double-sided tape at the gap of the window to plug the gap of the window, especially between the door frame and the door leaf, and between the door leaf and the glass. If the gap is too big, you can stick a few more layers, or you can use foam double-sided tape for better effect. The advantage of double-sided adhesive tape is that it can improve the sealing performance and will not affect the closing and opening of windows.

Maintenance method of high-rise large windows

1, clean regularly

Regularly clean the dust on the doors and windows, and keep the doors and windows, glass and hardware clean and bright. When cleaning, do not spray strong alkaline liquid (washing powder, soapy water) on the surface of the glass window to prevent the product from corrosion.

2, pay attention to the weather damage to doors and windows.

In bad weather, especially the typhoon and rainstorm days in the south, it is necessary to open and close the casement windows at home in time, otherwise the exposed windows will be easily damaged by strong storms in stormy weather.

Don't push and pull hard.

When opening doors and windows daily, whether sliding doors or casement windows, they must be opened lightly and closed lightly. If the switch is stuck and not smooth, don't use brute force, but stop to check whether there are obstacles or problems in some parts of the doors and windows.