What details must be paid attention to when choosing a closed balcony?

What should I pay special attention to when the terrace is closed? If the house is in a high-rise building and the closed terrace is at the height of the work, it is more dangerous, so it is necessary to invite special installers to carry out it to reduce the safety hazards. At the same time, professional buildings can ensure the quality of balconies. When selecting high-quality materials, we should pay attention to selecting high-quality materials to ensure their service life and safety. Don't covet low prices and choose poor quality building materials, otherwise it will lead to safety problems.

Closed balconies are mostly made of aluminum profiles and glass fiber reinforced plastics, and aluminum alloy roofs have strong texture, good stability and good construction sealing. If the residence is in a high position and the roof is sealed with glass windows, it is advisable to choose a steel structure that has been calcined at high temperature, and the material is not less than10 mm. Before closing the terrace, the merchant must go to the door to measure the closed area of the terrace, and then make it outside the construction site according to the measured size, and send it to the construction site after completion. Before installation, make sure that the window size matches the entrance position of the closed terrace, and then remove the wall near the closed terrace.

Drill holes at corresponding positions and fix the main window with expansion bolts. Generally, the owners are entrusted by the owners, and there are many iron pipes on the balcony guardrail. Due to long-term wind and rain, the guardrail is easy to corrode, thus reducing its strength. During the closing of the balcony, the safety of the guardrail should be considered first, and the aging one must be reinforced and replaced if necessary. The solution once and for all is to replace the aluminum or stainless steel guardrail. Most users don't realize that they have solved this problem on Windows.

In fact, it is very important to install windows, especially at the seaside, where strong winds often blow them off. Now it is common to make holes in aluminum window frames and walls, and then pull them out with screws. When drilling holes, besides the number of bolts, the corrosion of various metals should also be considered. Leakage often occurs in the rear glass of automobile, mostly at the junction of glass and wall, so attention should be paid to strengthening drainage.