Accidents caused by improper use of electricity (the more the better)

Ignoring the safety related to electricity, four electric shock accidents occurred in succession.

/kloc-4 electric shock accidents occurred in 0/0 day.

The six-point proposal of the power supply department calls on the public to pay attention to self-protection.

Wang Long Changzhou Evening News Due to blind recklessness and disregard for electricity safety, from July 12 to July 2 1 day, only 10 days, four electric shock accidents occurred in our city.

At about 5 pm on July 12, the construction personnel of an equipment installation and maintenance company in our city were electrocuted when they touched a line with a phase voltage of 380 volts due to their weak safety awareness during the construction of the communication line demolition project in Chenxiaqiao Village, Zou Jia Village Committee of Beigang. At about 2: 30 pm on July 20th, Peng was fishing in a fish pond next to Wujin Town 10000 V line. During the fishing process after the fish is hooked, the hook line is wound on the 10000 volt wire due to the inertia of the fish. Mou Peng tried to untie the entangled fishhook line with a fishing rod, but he got an electric shock and died after being rescued. July 2 1 Sunday morning 10, gale and thunderstorm. Song, a villager in Niutang Town, Wujin County, is holding a wire and trying to repair the outdoor feeder at his fish pond. At this time, the feeder did not cut off the power supply, and Song got an electric shock and died after being rescued. On the evening of July 2 1 Sunday 1, the construction team of an installation company in the new area was working beside the low-voltage line, without going through the relevant formalities and taking the necessary safety measures, so as to save trouble blindly and foolishly. The boom of the crane hit the low-voltage line, which caused the door of the crane to be electrified. The crane driver Yemou got an electric shock when opening the door and died after being rescued.

The bloody personal electric shock accident was thought-provoking, which once again sounded the alarm for the general public. To this end, the power supply department put forward six opinions and suggestions, calling on the general public and construction units to improve their awareness of electricity safety, strictly abide by relevant laws and regulations, and stay away from accidents: First, it is forbidden to fly kites, fish and shoot birds near power lines, and not to dig holes near poles and cables to prevent poles from breaking. Found that the wire is broken, whether it is charged or not, it should be regarded as charged, and keep a safe distance of more than 8 meters from the broken wire point, and report to the relevant departments in time; Second, in case of gale, thunderstorm and foggy weather above level 6, all units and individuals should stop open-air operations to prevent accidental electric shock accidents; Third, when using cranes, building houses or hanging things with tower cranes near overhead power lines, we must ensure a sufficient safe distance; Four, prohibit climbing poles, transformers, etc. , and it is forbidden to open the doors of the power distribution room and public switch box in the building without permission to avoid electric shock accidents; Fifth, if someone is found to get an electric shock, the power supply should be cut off quickly or connected with dry wooden sticks (sticks), bamboo poles and other insulators, so that the person who gets an electric shock can be separated from the power supply immediately. If the person who gets an electric shock is in a coma and stops breathing, he should be given artificial respiration first aid immediately and sent to the hospital for rescue as soon as possible; Sixth, household appliances should be equipped with qualified residual current protectors, which should not be removed at will. It is necessary to use electricity in a civilized and law-abiding manner, put an end to all kinds of illegal and illegal acts of stealing electricity, and avoid electric shock.

Accident case: The electrician was accidentally electrocuted while disassembling the welding machine.

On May 17, 2002, Diao Mou, an electrician in a power plant workshop, led Zhang, a team member, to overhaul the 380-volt welding machine. After the electric welding machine is repaired, conduct a power-on test and turn off the switch of the electric welding machine. Diao arranged for Zhang to dismantle the secondary line of the welding machine and dismantle the primary line of the welding machine himself. Approximately17; 15 Diao squatted down to remove the power cord connector of the welding machine. After dismantling the first phase, he accidentally got an electric shock when dismantling the second phase, and died after being rescued.