You must learn how to install the wall lamp.

Nowadays, wall lamps have been adopted by many families. Wall lamps are mostly installed in balconies, stairs, corridors and bedrooms, which are suitable for long lamps. The installation of wall lamp should master the necessities, not blindly install. When coordinating with interior decoration, we should consider the convenience of use. The following small series will introduce you to the installation method of wall lamp.

How to install a wall lamp

Wall lamp installation method

The installation method of wall lamp is relatively simple. After the position is determined, the lamp holder of the wall lamp is mainly fixed, and the wall lamp is usually fixed on the wall by embedded parts or punching holes.

1。 brush drawing/painting

It is the simplest and most commonly used method to apply adhesive to the bonding surface with a brush. This method is suitable for single batch or small batch production and construction.

2。 Spraying method

For low viscosity adhesives, ordinary paint spray guns can be used for spraying. For high-viscosity adhesives with short active period and difficult cleaning, the reinforced spray gun in reinforced plastics industry can be used. The advantages of spraying method are uniform coating and high working efficiency; The disadvantage is that the loss of glue is large (about 20% to 40%), and the loss of solvent in the air pollutes the environment.

3。 Gravity flow method

Use rainwater automatic device. This method is very suitable for flat parts, which is universal and suitable for mass production. In order to prevent the glue from blocking the nozzle, the glue used must have proper viscosity and fluidity.

4。 Roller coating method

The lower half of the rubber roller is immersed in the glue, and the upper half is exposed directly or indirectly through the printing roller and contacts with the working surface. Glue is rotated from the workpiece to the adhesive. On the surface. In order to achieve different gluing effects, different grooves and patterns can be made on the surface of the cots, and the pressure of the cots can also be changed or the gluing amount can be controlled with a scraper. Rubber rollers can be made of rubber, wood, felt or metal.

5。 Scraper method

It can be applied to limbs with high viscosity and adhesive materials such as adhesive and floor. The rubber plate can be made of elastic steel plate or rigid pvc plate with the thickness of 1 to1.5 mm.

I must learn how to install the wall lamp.

The installation of the wall lamp is very special. Decoration and practicality should be considered comprehensively, and the overall decoration should not be destroyed. The above is an introduction to the installation method of wall lamp. I hope this article is helpful to you. If you still don't understand, you can pay attention to our Tuba rabbit, which will provide you with more complete, detailed and updated information.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~