How does Cadiz tk2 fingerprint lock connect to the gateway?

Kaidishi tk2 fingerprint lock can set some functions and buttons on the fingerprint lock panel or directly on the APP, but only if the fingerprint lock is connected to the gateway. What are the specific operation steps? Keep looking down and you will know.

Steps to connect the gateway

Method 1:

1. Press the gateway network allocation button for three times, and the promoter device will access the network. Then the gateway will play "Searching for the device" and the gateway LED light will start to blink slowly.

2. Open the lower cover of the inner panel, press the distribution button 3s on the fingerprint lock with a sharp object, and the door lock will give a voice prompt of "distributing in the network, please wait", and then just wait for the distribution to succeed.

Method 2:

1. Similarly, pressing the gateway network assignment button three times will allow the sub-device to access the network, then the gateway will play "Searching for devices" and the gateway LED light will start to blink slowly.

2. Press the * key to lock the door twice, then enter the management password, then press # to enter the management menu, press 4 according to the voice prompt to enter the expansion module, and finally press 1 to join the network, and then wait for the network allocation to succeed.

Bian Xiao tip:

1 minute, if the gateway voice plays "Device Networking Successful" and the door lock voice prompts: The setting is successful, then the device networking is successful. If the gateway broadcasts: "Device networking failed, please try again" or needs to be restarted after timeout 1 minute.

Heart of the King 2 Click on the demo.