Is there any way to save the waste film with poor light?

As a photographer, you must have such an experience. Sometimes I want to take some photos indoors, but the light is not enough. If I shoot in this situation, the picture is not clear enough and the focus is not real. If there is no tripod: Look at the maximum ISO that your camera can bear, and don't have too obvious noise. Generally, numbers above 3200 are relatively poor. SLR can be raised, but it is not recommended. If the aperture is higher than F3.5 (depending on the lens), the aperture can be selected first. Indoor shooting, camera ISO, shutter, aperture, and mutual debugging, or increase indoor brightness, try lighting, reflector, and it will be fine. After that, color matching will be carried out to your favorite style.

If the indoor shooting light is insufficient, the following methods can be adopted. First, you can shoot with a tripod and a slow door, so that the photos won't be empty. The second is to improve the sensitivity of the camera, but this disadvantage is that the particles will become thicker. The third point is the most reliable, use camera flash or external flash. If you shoot with a mobile phone, it is recommended to choose new models such as vivo and Huawei in the past two years. If it still doesn't work, it is recommended to fill the light with a desk lamp and increase the power of the lighting lamp. He also said that it is not recommended to increase camera exposure. At the same time, the annular fill light is very effective. It is suggested to configure wireless microphone and other equipment to increase audio and video quality.

Your mobile phone is set to professional mode lock exposure, so that in the same scene, if the brightness of the actual video picture is basically the same, there will be no light for a while and dark for a while, but if you still use this lock exposure mode, if the scene you shot is brighter than the previous scene, the picture will be overexposed and over-bright. If it is a fast video (each picture only stays at about 0.5- 1s), you can use effects such as blur distortion (in fact, the default effect is quite fun). If it is a very formal video, such as news, recording, interview, um ... it is recommended to light it up and remake it. If it's not enough, I'm sorry, filming can only be low.