Night photography, how to take high-quality photos?

Shooting on a sunny day is sure to succeed, but in the dark, taking pictures with a SLR camera may be an adventurous attempt. Therefore, if you can use the correct shooting method, it will help you get excellent shooting results. How to shoot in low light at night? You will find the answers to this and other questions in the article.

As you know, the night is full of secrets and mysteries, and I want to share my photography skills with others as much as possible. Darkness is full of fun, because it is impossible to take high-quality photos at night without special settings and accessories.

Second, the night photography camera setting function When taking pictures at night, it is impossible to shoot without a tripod, because the harsh lighting conditions need to improve ISO and shutter speed, which may cause movement, which may lead to blurred pictures.

Avoid using automatic mode completely, but adjust it manually, because autofocus and built-in flash are unlikely to provide good lighting conditions under these extreme conditions.

Before taking pictures, please measure the light according to the brightness environment.

As mentioned above, don't use a flash when shooting (it is a built-in flash) because it will never illuminate what you want.

Aim at the target. This is true if manual focusing is used, which is most correct at night, because due to insufficient light, autofocus may fail and it is impossible to focus at all.

In these cases, please set the ISO value as small as possible to reduce the possibility of "wild" noise in the dark part of the picture. For example, for a camera with a cropping factor, an ISO value greater than 800 will be full of noise.

Because there is no aperture value, it is best to compensate the long shutter speed (about 8-30 seconds) or use the light bulb mode (manually set the shutter speed).

Taking pictures at night will bring many problems, one of which is white balance. There are many colorful light sources in the street, such as the moon, lights, shop windows, car headlights, scenic spots and so on. In this case, the best solution is to shoot with AWB (Automatic White Balance).

You can further correct all color distortions in any photo editor by mixing the slider to the desired indicator.

In addition to the tripod, please use the trigger cable or remote control.

If you don't have these extra components, please be content with what you have, that is, delay the shutter release for two seconds to enable the timer mode.

It is recommended to shoot in RAW format, which is helpful for editing photos better.

Third, choose the shooting location. Before shooting at night, please check the situation, find a suitable shooting point and evaluate the illumination of the object. If you plan to photograph buildings, be sure to analyze road traffic and street traffic. Choose the most favorable location for night photography in the city.

Please consider the venue carefully before pressing the shoot button. What parts of the picture are in the dark and where are overexposed? What are the advantages of showing it in photos?

Moving from one place to another, don't be afraid to use zoom or change the shooting point.

4. How to shoot portraits at night It is wrong to think that people can only take pictures at night with a flash, because the natural light emitted by lamps and various LEDs will make the photos have an interesting and natural appearance, as we have seen with the naked eye before. However, if your plan includes shooting people from the noise (so they can't see you), the shutter speed should be as high as possible to capture and stop moving.

Usually, to stop moving, you need to use a fast lens with high sensitivity (aperture -f/ 1.4- 1.8). The sensitivity is adjusted by ISO, and the higher its value, the less light is used for accurate exposure.

To shoot a still person, please set the aperture of the person under dynamic conditions to the minimum, set the shutter speed to115-from 1/60 to 1/500, and set the ISO value to 1600. When the aperture exceeds 800 ISO, please be prepared to see the graininess of the photo. The average value of the camera here is as follows. И o100-200, shutter speed is about115 aperture18-3.5,

5. When to use flash, and how to use flash, flash, lamps, windows, etc. in the case of insufficient light. If an external flash is used, it will play an important role in portrait shooting. In this case, it is best to use a reflector and diffuser (soft box) to make the skin color more natural and there will be no obvious overexposure.

In addition, you can take portraits in slow synchronization mode. It can be set in camera settings or external flash settings.

To enable slow synchronization, for example, on Nikon d5 100, you need to select "slow" mode in the flash settings, and on Canon 600d, you need to select "slow" mode in the settings.

From the above, we can know that night photography can not only take pictures, but also take high-quality photos, which is very important for becoming an experienced photographer.