Technical Commissioner's work summary

Time flies and hard work has come to an end. Looking back on our past work, we have gained a lot. Let's sum up our past achievements into a work summary. So, have you mastered the format of work summary? The following is my summary of the work of technical specialists (generally 6 articles) for reference only. Welcome to reading.

Summary of Technical Specialist's Work 1 Time flies, xx years have passed quietly. In the past year, with the support of the company's project leaders and the help of my colleagues, I earnestly performed my duties, strengthened the management of construction production, focused on improving my own quality, guided by the "Ten Systems" and "Five-Year Innovation" of the head office, improved the team's construction technology, supported the party organization to do a good job in ideological and political work, and strengthened my moral cultivation, so that my ideological quality and work level were continuously improved, and the construction production assigned by the project was successfully completed. The work of the past year is summarized as follows.

I. Work aspects

I have been engaged in the technical post of construction team for xx years, mainly responsible for the technology and quality of the team, and cooperate with the team leader to do the team work well. Since the beginning of the year, it has participated in the aid construction of Sichuan xx project, xxxx road reconstruction project and xx pavement project. Xx project is a political project with short construction period, large quantities, complex terrain, inconvenient transportation, slow progress of subgrade construction and insufficient cushion construction sections. However, in order to ensure the smooth completion of the construction period, under the special conditions of complex environment and difficult construction, our team adopted subsection construction, and the subgrade was submitted section by section, which ensured the construction progress, although the mobilization was frequent and the staff worked hard. In terms of quality, we adhere to the construction quality inspection system and strictly implement the "self-inspection, mutual inspection and handover inspection" system, so that quality problems can be effectively controlled in the construction of each working procedure and site management can be strengthened. Despite the shortage of materials, the quality requirements for materials entering the site have not been reduced, and any unqualified materials are refused to enter the site. Strictly control the construction progress, make clear the construction task quantity, and check the material cost first, which will not affect the quality, which is beneficial to the geometric size of our gravel cushion, and carry out strict sampling inspection on the incoming materials to prevent' running, running, dripping and leaking'. Every day, compare the engineering quantity completed on the same day with the accounting, find out the reasons for the shortage, lay a good foundation for controlling the material cost in the next step, report and summarize the task quantity of each completed section, analyze the existing problems, find out the deficiencies, earnestly implement them and improve them in time.

In the xx project, due to the influence of the weather and changes in the early stage, the project progress lags behind and the engineering quantity is large in the later stage. In order to ensure the smooth completion of the construction period, Liu Jingli of the company led three government officials to our construction line to provide service guidance and help. The construction team works in two shifts, 24 hours a day, and eats three meals on the road. After more than a month of intense construction, it was successfully completed within the time limit required by the owner. In the tense construction process, we can always implement the rules and regulations of the head office and cost management.

Second, the ideological aspect.

Over the past year, I have been studying and trying to improve my ideological and political quality and professional level. Seriously study the management systems of the Head Office, and deeply understand the spirit of important meetings and documents issued by the Head Office. Combined with practical work, we should learn various professional knowledge in a targeted way, on the one hand, we should seriously study the current norms and technical standards related to this major; On the other hand, strengthen study in practice, consult experienced old colleagues and supervision units with an open mind, and constantly improve their professional level.

Three. Xx year work plan

In xx, I will be responsible for receiving the materials from the mixing station in xx pavement project of the head office. First of all, I will lead the team to do a good job of weighing, perform their duties based on their posts, strictly weigh the quantity of incoming materials, and put an end to all' running, running, dripping and leaking'. Do a good job in sampling inspection of vehicles and trucks in terms of quality, put an end to any unqualified materials entering the site, fill in the receipt and daily report accurately and report them to ministry of materials and equipment in time. Keep in touch with the engineering department and quality inspection department at any time, control the overall materials of the project, and prevent single materials from entering more and leaving less.

As young technicians, we should carry forward the fine traditions of "passing on", "helping" and "leading" in the four companies, not only passing on, helping and bringing up the newly graduated students, but also caring and helping them in life. Let them feel at home in our company.

In terms of unity and cooperation and improving team spirit, we should respect leaders and colleagues, and we should be able to coordinate the relationship between colleagues. Strengthen the sense of responsibility, individuals obey the organization, subordinates obey their superiors, do not act arbitrarily, and listen to different opinions with an open mind. Treat people sincerely, be fair and dare to take responsibility.

Fourth, rational recommendation.

It is expected that the new responsibilities of the Head Office can be formulated and implemented as soon as possible. Let each of us work according to our own responsibilities, and whoever does things can avoid the phenomenon of buck passing.

Five, their own shortcomings and corrective measures

Generally speaking, communication with leaders and colleagues is insufficient, and management potential and work efficiency need to be further improved. In the future, we should exchange more information with colleagues on work, study and thoughts, so as to encourage each other, help each other and improve together. Spend more time studying and thinking.

The above is a summary of my work in the past year. Although some gains have been made in construction management, I still feel that there is a necessary gap between the company's requirements for upper management. In the future work, I will try my best to do my own job and do my bit for the future of the project and the company!

Summary of Technical Specialist's Work 2 20xx was a fruitful year, and for me personally, xx was a year of comprehensive progress in professional skills. In the past year, as a technical cadre with engineering construction experience, I partially or fully participated in the technical work of several construction teams specializing in steam turbines. It is in this busy and fulfilling year that under the unique conditions of Ludian Power Engineering, on the one hand, I tested my original engineering knowledge and further deepened it, on the other hand, I initially built my own professional knowledge system.

I. Overview of work

The technical work that I am personally responsible for in the whole xx year can be roughly divided into several time periods from the key points of the phased construction of the project.

At the beginning of the Spring Festival in xx, I was the only technical cadre of the whole steam turbine group because Haikou and Baima projects were in the critical period of construction. As the only technical cadre of steam turbine team, I am responsible for the technical work of all teams in steam turbine specialty. At the same time, the preparation plan of more than 60 sets of construction drawings of all 2 1 large systems in steam turbine specialty is also a time-pressing, huge and extremely important work.

Since August, my technical tasks have been gradually stripped off. In early September, all the tasks of Pipeline Class II were delivered to the newly transferred technical cadres from other places, and the tasks were reduced. From June 5438 to this year 10, I began to take over the installation technical tasks of two steam-driven feed pumps, and my professional skills entered a new stage in dealing with the new tasks. So far, my work focuses on the installation of two steam-driven feed pumps, the installation of temporary steam pipeline purging and the improvement of all steam-water pipeline systems responsible for the first-class pipeline construction.

Second, the work summary

In the work of xx years, I have never been intimidated by dealing with a series of heavy construction tasks and unfamiliar technical work. I have always despised the engineering and technical work I am engaged in. After all, these works have mature construction experience to learn from, and there are many engineers and technicians like me who are engaged in this work together. But I take a cautious attitude in working methods and strategies, because I can accumulate and learn valuable experience from the working practice and details of these systems.

I regard every job given to me by the team leader as a valuable opportunity to accumulate personal work experience. Successfully completing the task is my only work goal, and trying to solve the construction problems is my only work attitude. I participated in every construction task that I was responsible for, and fully grasped the key points of the unit project and sub-project construction. Taking the installation of steel platform and circulating water pipe in the steam turbine room as an example, these two construction tasks were the earliest unit projects carried out by the steam turbine team. During the construction of these two projects, I often rush between the main workshop and the circulating water pipe trench to check the implementation of key points of the project and discuss with the construction team leader to solve the construction difficulties. It is because I really put myself into the project construction process that I have mastered a series of construction points, such as span and verticality of steel platform columns, installation elevation control of steel column joints, connection quality control, installation quality control of circulating water pipes and so on.

As an employee of a modern large-scale enterprise, as an engineer and technician in a new era, I not only work hard, but also constantly sum up my progress. The conventional construction technology has long been firmly in my mind, and the new problems and difficulties encountered in the construction process are the focus of my summary. When the project is busiest, it is impossible to solve everything on the same day every day, so I will classify these things and deal with them in a planned way. Because my only project construction experience before Luzhou project was Panzhihua 135mw project, I had insufficient work experience and encountered many problems. I corrected all my shortcomings and mistakes in time, but I adopted the method of dealing with the fait accompli, analyzed the reasons from my shortcomings and mistakes, summed up the experience and lessons, and made them my wealth.

In addition to technical work, I also hold positions in the general branch and installation branch of the engineering project department, and I am also the person in charge of Qing 'an post of the steam turbine team. Participating in youth activities is always my safety. I participate in every activity of the Youth League Committee with my heart and perform my duties well in the activities of the Youth League Committee. In the youth activities, my only regret is that due to my busy work, I didn't carry out the activities of young workers in the steam turbine team as planned, and I didn't successfully complete the propaganda task on the steam turbine site in xx years. This is the failure of my project.

Three. abstract

I have always admired such a philosophical saying that a gentleman strives for self-improvement, and I have always demanded myself by the standards of an excellent engineer and technician, and I have also made progress because of this requirement. The glory of the company needs our efforts to create, and personal development needs our own efforts to achieve. For these lofty goals, I have been making unremitting efforts and striving hard. In the future work, I will continue to guard against arrogance and rashness, work hard, closely unite with everyone in the company's big family, realize the company's take-off with my brilliant youth, and write my own chapter with no regrets.

Summary of technical experts' work 3 i. Safety aspects

In the work of safety production, fully implement the safety measures and regulations of the group company and the company. In particular, the implementation of "two votes and three systems" reached 100%. In terms of equipment inspection, we have made great efforts to strengthen detailed inspection, constantly improve the reliability of equipment, and ensure the completion of various safety indicators issued by the company. Avoid personal injury, equipment damage, fire accidents, the impact on foreign network companies and major accidents caused by human responsibility. In safety study, we started weekly training to improve the team safety concept.

Second, the work.

Conscientious and responsible, dedicated, self-demanding, honest with others, practical work, obey the leadership arrangements, overcome various difficulties, and always treat the work with a positive and serious attitude. Especially in summer, the inspection of electrical equipment has been strengthened, and equipment defects have been handled in various high-temperature working environments in cooperation with maintenance, so as to ensure the normal operation parameters of XX specialty as much as possible. Although the number of major and minor repairs of the unit has increased in the middle of this year compared with previous years, the inspection and maintenance of the equipment have not been put down, and the inspection and maintenance are still carried out on time. Through hard work, we have made gratifying achievements. In this year's action, we successfully completed the task and got the affirmation and praise from the leaders.

Third, professional technology.

Study hard in technology, review the operating rules in theory every day, and constantly improve your skills through various communication channels in team learning; In practice, strictly abide by the operating rules, cultivate the individual's independent operating ability, ensure that misoperation accidents do not occur, write down the problems encountered in work, experience gained and matters needing attention at any time, consult with specialized workers and leaders with an open mind, knowing that it takes time to hone and accumulate knowledge, and then it will become stronger day by day.

Fourth, the ability to work

Ability includes coordination ability and accident handling ability. If "technology" is compared to "IQ", then "ability" can be compared to "emotional intelligence", and so can XX major. A high IQ does not necessarily mean a high EQ, because technology is dead and ability is alive. In all kinds of unexpected accidents, our team United and dealt with them decisively, nipping the accidents in the bud and minimizing the unexpected events. Therefore, quick and accurate judgment ability and flexible learning and application can do better.

Next year will be a year of development and maturity. Although I have made some achievements in my work and made a new breakthrough in technology through the overhaul of units in the factory, I will not give up the pace of innovation because of my achievements. We will continue to work hard and make our due contribution to tomorrow.

Technical Commissioner's Work Summary 4 As a technician in the power supply workshop of Mechanical and Electrical Department, based on his post, while doing a good job in mine-wide power supply technology, he pays attention to mastering his own power supply system business, improving his technical level, actively participating in various trainings, constantly expanding his knowledge, applying advanced technology and combining his own professional knowledge, and applying power supply technology to coal mine safety production. The following is a summary of my work:

First, actively study technology and strive to improve their professional level.

In July of xx, under the leadership of relevant departments, I visited and studied with the team in Jiyuan Explosion-proof Equipment Factory, Henan Province, mastered the new technology and new technology of new equipment, and actively discussed and communicated with my peers. Subsequently, relevant technicians from manufacturers and Nandian Chen Guo were invited to our mine to provide training on the application and maintenance of electrical equipment for power supply workers, and gave technical guidance to relevant technicians of our company on the spot, which solved many technical problems. I recorded the problems encountered in my work and asked the masters in the power supply workshop until I understood them. Whenever the relevant technicians of the factory come to the mine to solve the major equipment failure, I actively seek their advice. Through continuous study and practice, I gradually became familiar with the application of underground power supply system and high and low voltage equipment, and improved my professional level.

Second, reasonably design the power supply system and scientifically formulate technical measures.

Under the guidance of the section chief in charge of power supply, I gradually designed the power supply system of each coal mining face. Because I am not familiar with the working face and its mechanical equipment, in order to arrange the route of high and low voltage cables reasonably, I often go to the scene, measure the distance, set up calculations scientifically, and choose electrical equipment and cable models reasonably, which not only meets the actual needs, but also saves a lot of manpower and material resources. I designed 8 17 1, 7 198, 7 196, 7 174(2), 8 172, 7 199, etc. Based on the principle of "one project, one measure", I will formulate technical measures for construction safety in advance, strictly organize and scientifically formulate them, in addition to the maintenance of high and low voltage electrical equipment twice a month, as well as the laying or recycling of high voltage cables, equipment installation and standardization, so as to make the safety technical measures scientific and operable. After being examined and approved by the leaders of relevant departments, it will be communicated to each construction worker, and signed before construction, and the measures will be strictly implemented, so that the measures can really play the role of supervision and guidance in the whole process of prevention. In addition, I also assist the workshop director to make equipment maintenance and material plan, and put forward technical measures to prevent electromechanical accidents.

Third, the task of safety and quality standardization has been fruitful.

In order to implement the quality standardization work issued by the mine, according to the situation that the power supply team arranges and hangs cables in the main tunnels and substations underground according to the standardization requirements, this paper puts forward reasonable suggestions and formulates scientific technical measures for safe construction. In xx years, I mainly participated in the following major projects: Ⅱ (3) Installation of upper substation in mining area and laying of power supply lines; Installation of belt electric control system in belt concealed inclined shaft: Dongsan and Donger (3) installation of electric control and signal system of frequency conversion winch in mining area; Installation of power supply system in underground 8 17 1, 7 198, 7 196 and other coal mining faces; Installation of power supply system of large-scale comprehensive tunneling machine in -750 tunneling face; Power supply installation in workshop of -750 line and power supply system transformation of vehicle fleet; Main shaft substation replacement transformer, etc. By participating in these large-scale projects, I guided the technical work and further studied, laying the foundation for better power supply in the future.

Four, do a good job, improve the skill level of workers.

In daily work, according to the changes of the upper and lower high and low voltage power supply systems, the power supply system diagram is revised in time, so as to know the load of each substation at any time and be responsible for the maintenance of the underground remote monitoring system. At the same time, I recalculated the setting parameters of the high-voltage relay protection device in the mine and counted the high-voltage and low-voltage cables in the mine. Under the guidance of system leaders, we organize electricians to carry out skills training from time to time, learn new technologies, improve theoretical and cultural level and business operation skills, and often organize skills competitions, and actively carry out activities such as "qc group" and "finger dictation operation method". Through these training activities, the professional level of workshop electricians and their ability to deal with switch faults have been continuously improved, which has greatly shortened the time to deal with accidents and effectively guaranteed the safe power supply of the whole mine.

With the help and guidance of my leaders and colleagues, I gradually became familiar with my business and made some achievements in my work, but I also knew my own shortcomings, such as my lack of experience in accident handling. Therefore, in the future work, I will strive to guard against arrogance and rashness, accumulate experience and lessons, constantly adjust my way of thinking and working methods, hone myself in practice, be strict with myself, and constantly learn and innovate. Live up to the trust of mine leaders and branch leaders, strive to become excellent technical personnel and strive to make more contributions to the development of the mine.

Summary of Technical Specialist's Work 5 20xx I walked out of Nanyou with my professional stationery and finally graduated. In 20xx, I set foot on my first job: xx County Communication Branch. In the company, I am mainly responsible for exchange maintenance. Soon after, with the approval of the superior leader, I passed the technical examination and was fortunate to be hired as an exchange maintenance technician. I have held this position for four years now. I want to sum up my work in recent years and ask the company leaders to give me an appraisal and audit.

First, seriously study technical business and master equipment maintenance skills.

I worked in xx from xx to xx to maintain the SPC exchange. This is also my first job since I joined the work. In fact, xx's equipment maintenance is mainly based on exchange equipment, including the comprehensive maintenance of local telephone measurement, power supply, transmission, oil engine and other equipment. In the comprehensive maintenance work, we always adhere to the principle of "integrating theory with practice", learn while using, and constantly improve professional maintenance skills.

As the saying goes, "if a worker wants to do a good job, he must sharpen his tools first." In the study of professional technology theory, the principle of combining internal and external is adopted, with self-study as the main part and company training as the supplement. After all, the time to go out for training is extremely limited. Over the past few years, I have been studying continuously and played an effective guiding role in practical work.

Confucius said, "In a threesome, there must be a teacher." . Therefore, in practical work, I strongly recommend formalism. I have always been modest and prudent, and I am not arrogant or impetuous. When you encounter obstacles that you can't handle, you will ask experienced experts in time, not only to resume normal communication in time, but also to learn technical skills. In a few years, I have mastered the operation of local data and user data of switches; Have a further understanding of the performance of sdh equipment; Have a deep understanding of the working principle of power supply equipment; Accumulated the necessary maintenance experience of isdn, broadband equipment and terminals, and removed terminal obstacles for isdn and broadband users for more than 200 times. In addition, in many large-scale cutovers, the tasks assigned by superiors were successfully completed.

Second, strive to forge ahead and strive to develop in the direction of technical management.

Xx year 10 month, due to work needs, transferred to the county company to be responsible for the improvement of the computer room environment and the maintenance of exchange equipment. The change from technical post to technical management post has set a new and higher standard for me, and also created a good opportunity for the improvement of comprehensive quality.

For comprehensive work, I plan my time reasonably and make overall arrangements to ensure that all the work does not fall behind. Personality in the improvement of the computer room environment, I took the relevant requirements of the municipal company as the standard, worked hard on the details, cooperated with the construction and maintenance departments, and achieved good results. In the previous safety inspection, the municipal company affirmed and pointed out the shortcomings. In this regard, I carefully summarized and completed the rectification in time.

I sometimes feel a lot of pressure and I don't have enough knowledge. Therefore, I use every minute after work to learn all aspects of relationship work. With the accumulation of knowledge and experience, I can handle my work easily.

But there is still a big gap from the requirements of generalists. However, I believe that continuous efforts will always have an effect.

Life is long, and I will devote my whole life to this job I love and make my greatest contribution to the company.

Summary of Technical Specialist's Work 6 20xx 10 Graduated from xx College majoring in mechanical equipment installation, joined the work in 20xx, and worked in the project department of XX Co., Ltd. in 20xx. The practical experience accumulated bit by bit in my work is an inexhaustible wealth in my life. During this period, there are difficulties and gains. Because of my hard work, I have fulfilled my personal duties and strengthened my ability. Summarize the work during this period as follows:

I. Politics and ideology

Technicians should work for the interests of XX company and the project department, be firm in the belief that XX company will continue to grow and develop, and be full of enthusiasm and technology for the future of XX company. I start from doing my job well, sum up the work of construction technicians, start from me, start from now, start from the little things around me and persevere, do my best in my job and be an employee tirelessly. I will constantly strengthen my job skills, strive to master my job knowledge, be the backbone and expert of my job, and do my job in a down-to-earth manner.

Second, the work attitude

No matter at work or in life, I always believe that no pains are rewarded, so I have been working hard, constantly strengthening the skills learning of technicians and working hard. I love my own employees. I can treat every job correctly and seriously, work hard, go to work on time, make effective use of working time and stick to my post. The construction period is tight, there are few people and many tasks. Being able to follow the work, ensure that the inspection task is completed on time and the project inspection is carried out smoothly, which shows that our testers have a strong sense of responsibility and carry forward the spirit of continuous work and hard struggle.

Third, job responsibilities

Conscientiously implement the national guidelines and policies on standardization, quality management system, product quality supervision and inspection and research and development; Really implement the relevant standards, quality management methods and relevant regulations of the engineering products that this position is responsible for supervising and testing, and ensure that every test has laws to follow. Do a good job in entrustment acceptance, project investigation, data and feedback, and keep a tracking ledger for future reference. We should always adhere to the basic principles of technicians' work, implement the quality policy, implement the quality objectives, abide by the rules and regulations, and serve the construction site wholeheartedly.

As soon as I joined the work, I quickly integrated into the work, constantly demanding myself and constantly urging myself to improve. I ask myself to write down the gains and losses in my work and the problems that appear every time, so as to learn lessons. When I encounter problems or difficulties in my work, I will consult the general manager and leaders, listen to his opinions and suggestions patiently and improve my work.

Four. abstract

Although I have made some small achievements this year, there is still a big gap between the trust and expectation of the company and the superior leaders. In the future work, I will work harder, constantly improve my professional and technical level, and better complete the tasks assigned by the leaders. Broaden our thinking, deepen and refine our work, and strive to make greater contributions to this powerful iron army of XX Company.