Traditional Culture Encyclopedia - Weather forecast - Engineer's personal work summary
Engineer's personal work summary
Engineer's personal work summary model essay 1 20 _ _ year is coming to an end. Looking back on the work of the past year and summing up the gains and losses of the year, I feel a lot. Over the past year, I have been keen on my work, being strict with myself, keeping my job in order, and always maintaining the attitude of "modesty", "caution" and "self-discipline". With the care and training of leaders and the help and support of colleagues, I always study hard, make positive progress, strive to improve myself, complete my tasks seriously and perform my duties well. As a hardware engineer, in my heart, Shaanxi Derong is my home, my leaders are my parents, my colleagues are my brothers and sisters, and Derong's business is my own business. I will make the company's projects perfect through my unremitting efforts, and let our products from Shaanxi Derong be introduced to the market as soon as possible. I understand my responsibilities and obligations as a hardware engineer. Looking back on the past year, I summarized the following work:
I. Annual Work Situation
In the past year, I gradually grew from being familiar with the company's projects to being able to undertake some modules of the company's projects, and made due contributions to the company in these aspects. My personal ability has also been improved accordingly. However, the company's projects are more complicated and there are still many things to learn, so I will continue to work hard to understand the details and difficulties in the project more deeply, hoping to see the perfect birth of the products through my own efforts.
During this year, I mainly completed the following work:
1. On the basis of 20___ years, the indexes of radio stations were refined and studied. According to Deng Gong's suggestions and civil aviation indexes, our own radio station testing methods were summarized, and our radio station was tested in detail, and its performance was evaluated according to the test records.
2. According to the tracking test of the radio station, the problems existing in the radio station are sorted out one after another, and the corresponding parameters of each module are modified. Then, the schematic diagram of each module is modified, and the solutions are put forward for the fractional frequency division problem of transmitter frequency combination and the large harmonic problem of transmitter.
3. It took a month and a half to integrate and modify the system schematic diagram of the whole radio station, and at the same time, it made clear the meaning of various signals of the whole radio station, which laid the foundation for later research and development and testing.
4. According to the test data of the transmitter, the transmitter is evaluated, and some problems such as unstable power, inaccuracy, modulation drift, large distortion and PTT timeout are put forward. And then cooperate with Xigong University to solve the related problems of transmitter. During the cooperation, the problems such as power stability, modulation drift and PTT timeout were solved. By solving these problems, we also summed up a set of methods and formulas, which solved the related problems of the transmitter more deeply and laid the foundation for the subsequent debugging and production of the transmitter.
5. Further efforts should be made to solve the problems of large distortion and large harmonics left by the transmitter. Try to make MOD voltage generating circuit, narrow the scope of troubleshooting, try to use custom filter to reduce harmonics, modify power amplifier parameters and solve problems. Although the problem has not been well solved, we have also found the direction from it. I think if we continue to work in this direction, these problems will be solved.
6. Start to participate in the discussion and research of new schemes. Firstly, the modulation board is used to reduce the useless signal lines of the modulation board, and the DSP serial port protocol is used to communicate with ARM. Then the power board, which integrates the original separate power board and rectifier board, reduces the number of connecting wires and increases the heat dissipation area; Then the improvement of ARM, according to the newly purchased ARM model, makes an effective isolation scheme and changes the original power supply mode; According to the new requirements of radio station, the fractional frequency division function is added to the frequency synthesizer, so the frequency synthesizer adopts ADF435 1 PLL design.
7. Draw PCB boards of power board, modulation board and ARM adapter board, participate in the discussion of interface modes of each board, and weld ingredients for PCB boards.
8. The company's new project, Digital Radio, made a test tool for digital radio, planned the preliminary research and development scheme of digital radio, conducted three outdoor tests and evaluated digital radio. Although this project has not been carried out, I have learned a lot myself through this project and felt the motivation of the company's development.
9. Test the modulation board, ARM adapter board and power board on the single board, and then weld the shielding frame. During welding and installation, some structures were modified and improved. Finally, the function test is carried out, and the new modulation board, power board and ARM adapter board are debugged.
10, Fudan project, mainly made the following points:
1) First, get familiar with the basic situation of the project, and start to design the voltage sampling circuit to determine the type of resistor;
2) With the progress of the project, the manufacturing resistor and the basic circuit form are finally determined;
3) Then, according to the size of the resistor, determine the size of the cabinet, determine the manufacturer, and design and process the bus;
4) Submit the project to Shanghai for evaluation, and repair the installation size and bus installation mode in the cabinet again according to the evaluation results.
165438+
Second, work experience
I have been in the company for more than a year. From the initial understanding of the project, to being familiar with the working principle of each module, and then to undertaking the research and development of modules in the project alone, I saw that I was growing, progressing and maturing. At work, I also realize the importance of cooperation. Our radio system is very complicated, and each of us is a part of it, so our cooperation is very important.
Third, shortcomings in the work.
After a year's work and study, I also found that my deeper understanding of the project is not enough, and my ability to solve complex problems is not enough. This is where I constantly hone and improve myself in my work. To sum up in detail, during my one-year work, I did not do well in the following aspects:
1. I am not proficient in the professional technology of the work, and I have not found a solution to the transmitter distortion problem. I should strengthen my study in this field and provide guidance for my future work.
2. The working environment is not clean enough, the experimental platform is not neat enough, and the instruments are not in place. I hope to restrain myself from putting things back in the future and form good habits. Habit determines success or failure, and good work habits will actively promote our work.
3. I didn't sum up my work in place, and I didn't actively sum up my gains and losses in my work, which led to falling down twice in the same place. I hope to strengthen this aspect in the future.
Engineer's personal work summary of 20 years, under the correct leadership of the company, closely around the company's overall work ideas and priorities, the project supervision level has been continuously improved, putting an end to major safety accidents. Taking the company's quality goal as the work goal, and in line with the enterprise spirit of strict supervision, enthusiastic service, law-abiding, fairness and scientific integrity, I have basically achieved this year's work goal through one year's efforts. As a member of the supervision company, we will report our work and study this year to the leaders as follows:
First, the field work summary:
1. Master the engineering design drawings in the process of the project, find out the difficulties in quality control, determine the control objectives, and consult the construction specifications and quality inspection standards of various disciplines in this project to meet the needs of this project. Review the qualification and scheme of professional construction units entering the site.
2. Pay attention to the inspection and acceptance of materials and components in the site, and require the construction unit to attach the factory certificate to the materials in the site, and report to the supervision department in time for appearance inspection and quality certificate review of the materials in the site, and sign the materials for approval. The contractor is required to immediately remove unqualified materials from the site and shall not use them. At the same time, in the process of supervision, the materials used are tracked and supervised to prevent the contractor from shoddy and stealing the column when using materials.
3. Conduct on-site supervision on concealed works and key parts, and require supervisors to make on-site supervision records. Strict requirements are put forward for the construction inspection procedures of contractors' sub-items, so as to avoid the disconnection between engineering entities and data and ensure the synchronization of construction progress and data. For the quality, safety and progress problems existing in the construction process, first communicate orally, then ask in writing and follow up, and finally hold a special meeting to solve them. Organize special meetings on professional quality, safety and progress, and coordinate relevant personnel on site to conduct safety inspection on the construction site every week.
4. Work closely with the construction unit, review the construction progress plan prepared by the construction unit in advance, and put forward opinions on the unreasonable process arrangement of the construction unit after consulting with the owner and obtaining the consent, and ask it to make reasonable adjustments to make the progress plan meet the actual engineering needs. Before the construction of each type of work, it must be carried out in the example room, and it can be carried out on a large scale only after the supervision department and the owner check and accept it and form a written record at the same time. In the process of construction, the quantity of each single project should be completed quite well, and each project should be reported to the owner for confirmation in time.
Second, the existing shortcomings and suggestions:
1. In the process of work, I found that my professional level, professional skills and knowledge are limited. For example:
A, the boundaries between some detail acceptance specifications and mandatory provisions are not clear;
B, at work, there are many verbal instructions to the construction unit;
C, insufficient communication with the construction party, etc. As a result, the supervision work is very passive. In the future work, the control of the project schedule should also proceed from the implementation situation to avoid the disconnection between the schedule and the entity. At the same time, we should strengthen the study and accumulation of our own professional knowledge of safety production management to meet the needs of safety production.
2. It is suggested that the company can organize more experienced professionals to train our supervisors at an appropriate time to improve their professional level.
Third, the next work plan and experience:
As a supervision engineer, I haven't been an engineer for a long time, and there are still many shortcomings in my work. In the future, I will be more strict with myself, study my business hard, constantly update and supplement new knowledge, improve my business level and work ability, sum up my experience and better complete the supervision work.
Engineer's personal work summary Fan: After three professional and technical positions such as engineer, he worked in xxx special maintenance project, and served as project chief engineer and project manager. The quality of many projects has reached excellent engineering standards. During the five years of front-line work in construction, under the direct leadership of the general manager and chief engineer of the company, I meticulously carried out technical management and strictly controlled the project quality. After several years' efforts, the project management departments of the company have established a strict management system and obtained the internationally recognized xx certification of quality management system for construction enterprises. In the past five years, my professional and technical potential has also been enriched and improved in the process of contributing my intelligence to the development of the company. In a word, I have done some useful work in the past five years, but there are still many problems to be improved.
First, promote the use of new technologies and build quality projects.
Engineering quality is the life of construction enterprises. In order to obtain excellent engineering quality, technical managers are required to have the advanced consciousness of creating excellent projects. As the technical director of the project, I will take the lead in establishing and improving the relevant technical and quality management system of the project department. According to the construction method of the project, with me as the person in charge, the project quality objectives are decomposed into various professional and technical posts, and then the construction is organized according to the requirements of technical posts. A series of management systems, such as technical review system, engineering quality inspection system, hidden acceptance system, quality common fault control measures and semi-finished product protection measures, have been established successively, which is conducive to ensuring engineering quality. Construction was carried out in strict accordance with the requirements of design and construction drawings, national specifications, procedures and general atlas, and all sub-projects were carefully completed in accordance with the requirements of creating quality products, thus achieving the quality goal of "creating quality products with high standards and high quality". Through the direct participation and control of the technical work of the project, the quality, progress and benefit of the project have received good results.
Two, to study professional and technical business, do a good job.
In many projects, due to tight time and heavy tasks, I have to take the initiative to put down my personal rest time, devote myself to my work and work overtime without regrets, which fully embodies the vanguard and exemplary role that a young professional and technical personnel should have.
In daily work, with solid professional knowledge and theoretical foundation, I feel like a duck to water in my work, and I am proficient in everything from technical guidance and quality inspection and acceptance on the construction site to verification and management of construction technical data. The technical documents and all kinds of application materials formed in the work are rigorous and standardized, which has won the honor for the enterprise.
Three, the implementation of computer office, the use of high-tech means to improve the economic efficiency of enterprises.
While studying professional and technical knowledge, I also tried to explore and learn computer software and hardware knowledge, and successfully applied xx series software to daily construction management. Through continuous study and practice, I worked hard to promote computer management of engineering management materials, complete Word processing with Word, and print various record forms and text materials. Using Excel to store and analyze engineering information brings quantitative basis for engineering decision-making. Using electronic slides for training, modern multimedia forms, vividly explain the knowledge of construction technology and common sense of building structure, completely change the traditional education and training methods, and make high-tech and modern technical means really serve production and quality management. The popularization and application of computer-aided design drawing software in work has completely freed construction technicians from the heavy burden of drawing by hand with drawing boards and pencils, making engineering drawing extremely simple.
Through the study and study of computer software and hardware knowledge, I completed the construction of the company's internal computer local area network, so that computers in all departments can enjoy resources, besides data, they can also enjoy printers, saving a lot of valuable funds and achieving good economic benefits. In order to meet the needs of the development of the times, we must constantly learn and update our knowledge. To this end, I took every opportunity to participate in various training courses and technical exchange activities. During my tenure as an engineer, I participated in various special trainings organized by relevant departments many times and obtained the certificates of registered supervision engineer and testing engineer of the Ministry of Communications.
Engineer's personal work summary Fan Wen 4 has been in the company for nearly half a year. With the strong leadership and care support of the company leaders, individuals have made great progress in 20 _ _. In the course of my work, I successfully completed my annual work goal for 20 years. Personal work in 20 _ _ years is summarized as follows:
I. Annual Work Situation
1, familiar with the rules and regulations of the company.
Joined the company on 20 _ _, 10. In order to better integrate into the company team and lay a good foundation for future work, I stepped up my understanding of the company's rules and regulations and became familiar with the company's corporate culture. Through understanding and familiarity, I am proud to join the company's team, but I also feel my own pressure. In the future work, I will take the company's rules and regulations as the criterion, be strict with myself, be honest and self-disciplined, dare to innovate while adhering to the principles, and complete the task faster and better.
2. Be familiar with the structure and site conditions of the project.
As a civil engineer, being familiar with and understanding the site is quite beneficial to the future work. In order to better carry out the work in the future, I went to the scene many times to get a deeper understanding of the layout of the scene. After mastering the first-hand field data, I consulted the relevant technical data, studied the structure of the project, analyzed the difficulties and difficulties in the future construction, and analyzed the basic forms of the project. Through research and analysis, the actual situation of project construction management is objectively predicted, which provides a reliable basis for the next step of planning.
3. Participate in the modification of the management system of the engineering department.
In order to facilitate the management of the engineering department in the future, I combined the requirements of the company and the actual situation of the engineering department, referred to the relevant systems of well-known real estate enterprises such as ABO, and compiled and revised various rules and regulations of the engineering management of the engineering department. The establishment of this system is conducive to clarifying the responsibilities of each post and providing guarantee for project management. Through this compilation, I have a further understanding of other majors in project development, and it also makes my next work clearer.
4、20___
In order to complete the company's project development task in 20___ _ years, and make scientific and practical work contents of the engineering department and project construction progress plan in 20___ _ _ years, I analyzed the weather conditions in 20___ _ _ years, predicted the weather conditions in 20 _ _ _ years in combination with the perennial weather conditions in Wuzhi County, and carried out the project progress in combination with the weather conditions and project progress.
Second, the existing shortcomings and improvement measures
I will be in blowing in the wind soon in 20___. Looking back on my work in the company in the past six months, although the workload is relatively large, there are not many highlights, and many jobs are still unsatisfactory. To sum up, the shortcomings mainly include the following points:
1, lack of communication, unable to make full use of resources.
In the process of work, because I am not familiar with other majors, and because of my face, I don't take the initiative to ask other colleagues, which leads to reduced work efficiency or even mistakes, and I can't make full use of superior resources. As the saying goes, "Three people must have a teacher". In the future work, I will actively strengthen communication with colleagues in other departments, share resources through the company's platform, and improve my business level.
2. Lack of planning
In the process of work, especially in the construction stage of project development, due to the lack of planning, the purpose of work is not clear enough, and the contradiction between primary and secondary is unclear, which often achieves twice the result with half the effort. The leader is dissatisfied or full of grievances. In the future work process, I will make a work plan carefully, strengthen my understanding of the purpose, distinguish between primary and secondary contradictions, and strive to get twice the result with half the effort.
3. The major is narrow.
As a modern talent, he should be versatile, so that talents can meet the needs of the times and the company. My professional field is narrow, and I don't know enough about other real estate majors, especially marketing planning and laws and regulations, which limit my own development. In the future work process, I will strengthen the study of other majors, make full use of the company's resources, improve subjective initiative, and strive to become a multi-functional and compound talent.
Summary of the Engineer's Personal Work: In 20 _ _ _ _ year1October, I was transferred to the laboratory of the first resident office in the west section of the West Transit Highway as testing engineer. With the support of the leaders and the active cooperation of my colleagues, I have successfully completed this year's supervision examination on the principle of strict supervision, enthusiastic service and fairness. The supervision work this year is reported as follows:
1. The resident office has actively purchased testing equipment and instruments, installed, debugged and calibrated them, and applied for temporary qualification on site. At the same time, the implementation rules and supervision rules and regulations of the test have been continuously improved, and various charts have been put on the wall and passed the acceptance of the provincial quality inspection station at one time, which has the test conditions for the construction preparation stage. While building the resident laboratory, supervise and check whether the contractor's entry test personnel and equipment meet the requirements of construction and contract and the development of all work, and require the contractor to establish and improve the quality self-inspection system, so as to lay the foundation for the smooth start of construction.
2. Before construction, firstly, according to the requirements of design drawings and specifications, the standard compaction degree of various raw materials, concrete mixture ratio, soil and lime soil proposed by the contractor shall be tested and verified, so that all indexes can meet the requirements of construction specifications and design drawings and provide reliable and accurate test basis for comprehensive construction.
3, material quality control, is the focus of our test supervision quality control, the premise of qualified products is that we must have qualified raw materials, which is my most personal experience in highway engineering construction. The main content of our daily material quality control work is to check the factory certificate of materials with the model, specification and factory date of imported materials on site, the contractor's self-inspection and supervision sampling control, the investigation and retest of suspicious materials, and the unqualified materials refuse to enter the construction site.
4, the construction process control, each subdivisional work or single project before start working, supervision and testing personnel to check the concrete mixture ratio, before start working, observe the workability of concrete at any time during the construction process, always keep within the scope of the design requirements, to ensure the internal quality of concrete, at the same time, the contractor and supervision to make representative concrete specimens, as one of the quality control indicators of the project. 20___ years passed quickly. Looking back on the supervision work in the past six months, the deepest experience is that to do a good job in supervision, we must be strict and serious and have a strong sense of responsibility. No matter how complicated the project is, as long as the supervisors can perform their duties in strict accordance with the construction norms and regulations, they can fully grasp the whole project dynamics and control the whole project quality. At the same time, supervisors have high professional quality, and can prompt each working procedure and every link in advance. It is of great help to our supervision work to nip the possible quality problems in the bud and prevent the links that may cause quality hidden dangers in advance, and it will certainly promote our work.
Although we have been working hard to do every job in a down-to-earth manner, there are still some shortcomings, such as poor on-site control and supervision, and confusion in filling in internal data. In view of the existing problems, it is reminded to continue to study construction specifications and test procedures seriously, be familiar with design drawings, improve professional level and self-quality, strengthen supervision, increase sampling frequency, keep abreast of construction trends and control construction quality. With the strong support of the Western Transit Highway Project Office and the Director's Office, and with the active cooperation of the contractor, we will continue to do a good job in supervision and test for 20 years. 20___ years, the task is arduous, the workload is heavy, and the requirements for our testing work are more stringent. Each tester is required to control in advance, put an end to post-processing, have a serious and responsible work attitude, have a strong sense of responsibility, and be fully familiar with and master business knowledge and skills. Make up for the shortcomings in the past, strictly control the entry quality of engineering materials and the quality inspection of the construction site, be the patron saint of engineering quality, and establish a good corporate image for Hualujie Highway Engineering and Technical Consulting Co., Ltd. in the construction of the western region.
- Previous article:Why is the cold medicine sold by Tik Tok so cheap?
- Next article:The weather in Pujiang tomorrow
- Related articles
- I want to go to Wuyuan on the 23rd, but the weather forecast says it will rain heavily. I wonder if Wuyuan can still see rape flowers on rainy days?
- Men drive accord, which is better, black or white?
- Observe the weather changes in spring.
- What clothes can survive the weather of MINUS ten degrees with one dress?
- Fengxian hourly weather forecast
- Causes of complex tropospheric weather
- Birds are not afraid of people's poems
- Will the price of live pigs rise recently?
- Is it true that the fishing salary in Xiamen is more than 10000? Could it be a lie?
- The composition of the sixth grade writer is 300 words.