Hikvision Webcam Installation Course

After doing a lot of machine vision, I finally decided to start learning computer vision, so I opened a hemispheric network camera of Hikvision and started the whole thing.

Well, since it's a second-hand webcam, when I got it, there was only one camera. What should I do? What a panic! No instructions! ! ! Then all kinds of Baidu, Zhihu. Found the connection and use method of Hikvision's network camera.

CSDN- Professional IT Technology Community-Login

According to the tutorial steps, download the SADP software. After the network camera and the computer are directly connected through the network cable, open the SADP software and refresh the interface. Well, here comes the problem again.

I can't find the equipment. What should I do? Should I give up?

Baidu, Zhihu found a big circle, only to see the webcam without power?

What the hell? I only started with one camera, no charging cable! ! ! Then I asked the seller, why not give me a charging cable? I want to give you a bad review. It is estimated that the store is speechless for a white girl who has just entered the business. The store said that this device has no charging cable, and the network cable has electricity. I am worried about you, you ghost. I tried, and it didn't respond. Then I took a picture of him with the bar code on the back.

The store said that it did send less, but this webcam is powered by POE, not POD. ?

What is POE, what is POD, I am good.

Then a little thing like a router came by mail, but there was no antenna, which seemed to be called a POE switch.

I plug in the POE switch, one port is connected to the webcam, and the other port is connected to my computer. This command is required, otherwise SADP will not acknowledge it.

Finally, SADP recognized my device. Well, what's the difference from the tutorial? How does the device automatically activate?

Forget it, move on to the next step.

Now it's time to change the ip address of my computer. Yes, the pit is coming again. After plugging in the computer, my computer actually showed four Ethernet connections, which almost crashed the computer.

Then I looked at the name of each Ethernet connection and excluded two virtual machine Ethernet, leaving two. Ok, I'll disable them in turn and see which one will affect it. Ok, finally found the corresponding Ethernet.

According to the ip address of the webcam, subnet mask and gateway, I changed the ip address of the computer.

I almost succeeded, so I bought a cup of coffee happily.

Log in to the ip address with chrome when you come back. Why do I need a login password? The store hurt me. Did you give me all the information?

The store replied that I forgot my password, and it was used second-hand. . . .

I started with third-hand goods. . . .

Well, it's no use wasting so long. No way, Baidu

Then I found that Hikvision's official customer service WeChat account can change the password.

After inputting a lot of personal information, I downloaded the software scan code and finally found the password again.

Then I opened the ip with chrome and logged into Hikvision's webcam page.

Why not install the plug-in? It is inconsistent with the configuration information. You can see the configuration information on the page.

Then I checked his instructions, well, chrome doesn't support it.

Then change it to ie. This time, the plug-in will eventually be installed. Well, finally there is a picture.

A little smug.

I recorded a video, and the saved file was actually on the C drive. How can this be tolerated? I changed the saved directory in one operation.

Back to the main page, I can't collect videos and photos!

Then a meal with Baidu and Zhihu. I found the reason. It turned out to be ie automatic protection function. Is there such advanced operation? ie666。

After running ie as an administrator, I changed the saving directory again, and finally it can be used normally.

Hikvision home network camera C 1

operational approach

0 1

Step 1: Turn on the surveillance camera and connect it directly to the router LAN interface. All the connection work has been completed. Now you need to open your notebook to check the wireless routing settings to ensure that the first step of preparation is successfully completed after the DHCP and UPnP settings of the router are turned on.

02

Step 2: Users need to register on the shipin7 website. At this time, they must be bound to the mobile phone to facilitate the alarm prompt function. After downloading the plug-in as prompted, you can add the camera. After confirming that the camera is connected correctly, you can directly search for devices in the LAN or add serial numbers. Fill in the verification code according to the operation steps to complete the connection.

03

Step 3: Actually, in this case, the camera can work normally. However, due to home monitoring, there are many restrictions on the direct connection between the messy network cable and the router, so you only need to scan the wireless signal and input the corresponding wifi password to realize the wireless connection. If the password is saved successfully, the network will be disconnected for a short time when the network cable is unplugged, but the monitoring mode can be restored after 5 seconds.

end

Special tips

Simple operation page and connection mode let more consumers see the future trend of home monitoring, one-line connection and one-button protection. The design purpose of this surveillance camera is not only to consider the security level, but also to communicate with parents, children and employees through the surveillance camera.